Hello there i have the same setup but i've problem with the cutting on the plotter. Well i can print through the eco solvent large format printer with the maintop software which came with it but After if i want to cut the same design on the plotter with the design i did from the Eco solvent printer machine the plotter doesnt work it cut on different places instead of cutting on the design.The plotter soft ware i use is sign master software . Please is there any software which i can use on one computer for both eco solvent large format printer and the plotter machine that will work perfectly without problem ?
Hello! First of all thanks for watching! Unfortunately we have zero experience with this type of process. We only use our plotter to cut vinyl. In case this helps, we use CorelDRAW to vector our logos and Cutting Master 3 (CM3) for our plotter and they work perfectly fine for what we do. Sorry we don’t have an answer :(
Hello! I am not sure if you are talking about a picture of a person or just a picture of a logo. We have used CorelDRAW to vector a picture of a logo taken with a cellphone and it worked great 👍.
People that have printers use illustrator or graphic designers but for vinyl cutters you need softwares like coreldraw to turn images to clip arts or vectors plus corel is compatible with most vinyl cutters and we wish were sponsored by them but we are not.
OUR AFFILIATE LINKS:
CORELDRAW SOFTWARE 2021 FULL VERSION: amzn.to/3MaBvhA
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Get your blank shirts here: bit.ly/3RA6DdF
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Siser color guide: amzn.to/3ZuQJ60
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Also always do a depth check before you cut your designs !
Good point! Thanks :)
Hello there i have the same setup but i've problem with the cutting on the plotter. Well i can print through the eco solvent large format printer with the maintop software which came with it but After if i want to cut the same design on the plotter with the design i did from the Eco solvent printer machine the plotter doesnt work it cut on different places instead of cutting on the design.The plotter soft ware i use is sign master software . Please is there any software which i can use on one computer for both eco solvent large format printer and the plotter machine that will work perfectly without problem ?
Hello! First of all thanks for watching! Unfortunately we have zero experience with this type of process. We only use our plotter to cut vinyl. In case this helps, we use CorelDRAW to vector our logos and Cutting Master 3 (CM3) for our plotter and they work perfectly fine for what we do. Sorry we don’t have an answer :(
@@RDIdecals thanks for your time
Love Coreldraw
We do too
How can I get in contact with you for a job?
We will leave it here, due to getting so much junk and scams we may change it or delete it later: info@stickeraficionados.com
@@RDIdecals got it, sorry I just saw this. I’ll send it over rn. Subject of the email will be “ Gustavo decal”
Thanks guys 👌
What do you charge for a decal that size? If you dont mind.
For this pair I believe we charged $180 but that was the price just for the decals
With that program, can you take a picture and change it so it can format to the vinyl cutter?
Hello! I am not sure if you are talking about a picture of a person or just a picture of a logo. We have used CorelDRAW to vector a picture of a logo taken with a cellphone and it worked great 👍.
What is the Size of this Sticker? How much did you charge for 2 -Color Sticker?
It was 32 by 18 and for the pair we did 120 as it was for a returning customer
What backing paper do you use?
It comes with oracal 651
Is this video sponsored by CorelDraw? No mention of other software eg. Illustrator
People that have printers use illustrator or graphic designers but for vinyl cutters you need softwares like coreldraw to turn images to clip arts or vectors plus corel is compatible with most vinyl cutters and we wish were sponsored by them but we are not.
@@RDIdecals Graphtec Cutting Master has a plugin for Illustrator. I’ve used both and IMO illustrator is superior. Also cheaper.
Nevermind your first affiliate link is for CorelDraw.
Machine price is...?
In USA as of right now is around $1,400 for Graphtec CE7000-40
Is this video sponsored by CorelDraw?
Not yet 😌