Tie a nut on 550 cord shoot it through a boot then use a magnetic bolt retriever to fish the cord. tape your wire to the bolt pull there wire back through, I learned this little truck running wires through some pretty wild motorcycle bars lol
Hey Tony, your attention to even the little details on this video really helps. I have a red 2003 Chevy Silverado 1500 HD very close to yours. I need to put on towing mirrors like yours for pulling my trailer. My truck has fixed side mirrors with, (no extension, no turn signal, no heater) built into the mirrors. My truck AC/Heat control unit does have a switch intended for a rear window defrost and/or mirrors, even though I do not have a rear window defrost either. I'm curious if you think these mirrors you installed would likely have working turn signals and mirror heaters with my truck? Thanks for the great video and the links to the mirrors you installed. Best regards...
@@lewchaney2138 The heat function MIGHT work, but I’m unsure if the turn signals will work because it depends on if your door switch has the pins for it or not. I would probably contact which ever brand you plan to go with and ask them directly since different manufacturers probably wire them a bit differently or have different options. I had someone else ask me the same question but I’ve been unable to confirm unfortunately.
So if we didnt wire it how u did those led will come on when in reverse or still need to wire them up to turn on ? I just wanna plug them in and thats it not tryna do any wiring
Awesome video. What if I want to connect the blue wire to my drls and the white and gray to my reverse lights ? Can that be done through the dash too ? And does anyone have a video for that ?
I don’t have a video on that but you can definitely do it. You’d just have to use a test light to figure out which wire at the headlights switch is for DRL and tap into that, or run a wire out the the DRL socket wiring. Reverse is a bit more tricky… I think you’d have to tap into the reverse lights.
Mine already had defrost. You'd have to do some additional custom wiring if you wanted to add defrost to a truck that never had it since there's no dedicated switch for it I would think.
Splice it like the rest of the wires as shown at 1:02:00 using your preferred splicing method. Just gotta jam 1 end of brown wire into 1 end and then the other end of brown along with the blue to the other end.
@@footballlips7675 A lot of people tap into the reverse instead because the mirror lights will also come on when you lock/unlock the truck using your fob. I didn’t want to be “extra” like that and preferred to have manual control via the cargo lamp switch.
@@footballlips7675 there’s a bit of a shroud around the light on the mirror so it doesn’t blind you when backing up if that’s what you’re concerned about. There’s a reverse fuse in the fuse box under the hood you can tap into for reverse power and if you don’t like it then switch it to dome.
I’m also in MN, I have a 2003 Chevy Silverado 2500HD and recently when I tried to start my truck I only hear a click but the truck doesn’t start. The headlights, radio, locks etc work
Hey neighbor! 😎 Just a faint click as like a relay inside the cab? Or a more solid click like the starter itself? If it's the latter, your starter is likely out because the clicking at the starter is the solenoid engaging and trying initiate the starter itself with no response from the starter motor. Mine still works on this truck but the starter on my "01 Sierra did the same thing and crapped out on me.
@@briizcustoms9543 Probably starter then but you're more than welcome to post a video to my Tony The Truck Guy Facebook page or email to Tonythetruckguy@Gmail.com
Love the video! It’s very helpful. Hopefully putting my new mirrors on Tomorrow night. My only question is that I want the reverse lights to come on everytime I put my pickup in reverse. So where do I tap that into?
You’d have to run the wire and tap into the reverse light wiring at the tail light unless you can find a wiring schematic that shows somewhere closer to the cab to tap in like maybe the fuse box if there’s a reverse light fuse.
Did you have to do any extra wiring for your drls? I bought some yitamotor tow mirrors for my avalanche and my drls arent working so ive been oitsourcing to figure it out, everything else works but my drl white lights
@@codywheelus4887 If you mean the forward facing lights on the mirrors, mine are markers not DRL. They only come on when the headlight switch is in marker or headlight position, unless it’s on auto and it’s dark enough to trigger headlights.
With the blue wire for the running lights spliced into the brown/white wire, do the lights come on with the switch on auto, or does it have to be turned to marker lights/headlights for them to come on?
So what would i do if i wanted the white led to be on as like a drl kind of like cateye drl headlights with the white bar? I have drl white light bar headlights that are come on whenever i turn my truck on no matter what and would like the led bar on the tow mirror to do the same, any suggestions ?
@@BrittonPascual You would have to order the mirrors so that they are set up for the white to be on as the DRL. It’s all about how the mirrors are wired
Hey, I was trying to find your video about programming a key fob for Toyota. It was on another video you said look out for that in the future it was about two years ago. I was wondering if you could send a link or give me some information on how to do that. The guy at the dealership said that you shouldn’t have to program it he just replace the battery and now all of a sudden my key fob doesn’t work.
If it’s just battery replacement then you shouldn’t have to reprogram. Double check there’s no sticker or plastic on either side of the battery and that it’s secure/making a good connection. And of course make sure it’s not in upside down. I’ll find the video and post it for you though here
Hey man I just installed these the same way you did. But whenever I have my headlights on, the running lights turn orange but when I turn the headlights off, the running lights go to white. When the truck is off they work correctly but when the truck is on it does that. I wired it the same way you did. Would you have any ideas why it does that?
Not sure why it would work fine with the truck off and then not with it running that makes zero sense unless you tapped into an ignition power source instead of the headlight switch. Might have some wires crossed because the white should be running light not orange, just the blinker should be orange. I’d give everything another look over to triple check it’s all connected right and if you’re still having issues then maybe snip the running light wire and see if the blinkers and everything are working properly. Might have to tap into a different wire on yours for some reason but mine gave me no issues
@@ryleelent My bad, I just did another mirror video and those were a bit different lol. Yes, the blue would need to go to power and then the gray wire needs to be grounded. You can leave the white alone if you don't care about the dome/reverse light. There's a 10mm nut on a stud down by the parking brake area that you can run the grounds to if you want and then there's a fuse under the hood I think for trailer marker that you could tap into for the running light power.
@@TonyTheTruckGuy just thought of this I tried putting direct power with a charged battery and put the blue to positive and grey to ground and they still didn’t work are my mirrors just junk?
Do I need extra wire like you have and do I have to route them through the cab like you did or can I just plug them into the old ports and use them that way
They come with all the wiring. You can just plug the new mirrors into the door panels like the old mirrors and use them like that, you just won’t have a forward facing running light or the rear facing backup/cargo lights on the mirror.
And problems with adjusting them? Im looking at buying these because I already have an aftermarket set on my truck but they wont adjust like they should to see out of them properly.
Both these mirrors adjusted up/down and left/right as I needed them to. I don’t adjust constantly but I didn’t have any issues setting my initial adjustment.
Not sure. They are marketed for 03-07 so you’d have to take your 02 door panel down and see if the connectors look the same. I would guess they would work but I don’t know for sure.
You can spam the round dome light override button by the headlight switch I think 6 times and it will disable the DRL’s. My switch must be messed up though because it wasn’t working lol.
Because the new ones simply don’t have a motor in them and are a different style. They would cost 2-3 times as much if they added that function probably.
I like the stock retractable. I've not been able to find new ones. That retract and extend for towing electronically. Mine gave out, so I'm trying to find stock ones that work
Hey man, just put them on everything works great. Only thing is when I turn on the heated glass the little light indicator on the mirror doesn’t light up even tho the heated glass actually works
It’s not supposed to light up haha. The heated mirror logo is just etched or printed onto the glass like the “objects in mirror are larger than they appear” message that you always see on passenger side mirrors.
Great video, i just ordered the same mirrors and after watching your video i was planning on installing them the same, only problem is that im installing them on a suburban 😑 it doesn't have the dome light like your truck mines got the back window wiper instead, how would you recommend me installing them??
I do have a video coming up on replacing pads/rotors on a 2007 corolla, but no calipers at this time. I will be replacing them in a few weeks though, and I'll be making a video on it then.
So what would i do if i wanted the white led to be on as like a drl kind of like cateye drl headlights with the white bar? I have drl white light bar headlights that are come on whenever i turn my truck on no matter what and would like the led bar on the tow mirror to do the same, any suggestions ?
Thank you so much for your help and bring us a really detailed video.
What did you hook the blue wire from the mirrors to?
Watch the video lol. 53:30 and 1:00:55 I cover the blue wires.
Excellent video. Very very helpful.
Thanks! Glad I could help.
Tie a nut on 550 cord shoot it through a boot then use a magnetic bolt retriever to fish the cord. tape your wire to the bolt pull there wire back through, I learned this little truck running wires through some pretty wild motorcycle bars lol
Hey Tony, your attention to even the little details on this video really helps. I have a red 2003 Chevy Silverado 1500 HD very close to yours. I need to put on towing mirrors like yours for pulling my trailer. My truck has fixed side mirrors with, (no extension, no turn signal, no heater) built into the mirrors. My truck AC/Heat control unit does have a switch intended for a rear window defrost and/or mirrors, even though I do not have a rear window defrost either.
I'm curious if you think these mirrors you installed would likely have working turn signals and mirror heaters with my truck?
Thanks for the great video and the links to the mirrors you installed.
Best regards...
@@lewchaney2138 The heat function MIGHT work, but I’m unsure if the turn signals will work because it depends on if your door switch has the pins for it or not. I would probably contact which ever brand you plan to go with and ask them directly since different manufacturers probably wire them a bit differently or have different options. I had someone else ask me the same question but I’ve been unable to confirm unfortunately.
So if we didnt wire it how u did those led will come on when in reverse or still need to wire them up to turn on ? I just wanna plug them in and thats it not tryna do any wiring
You need to do the additional wiring if you want those to work. Heat, power, and marker/blinker will work plug and play.
@ okay bet thanks for answering 💯
@@brycelocs2386 No problem, good luck!
Awesome video. What if I want to connect the blue wire to my drls and the white and gray to my reverse lights ? Can that be done through the dash too ? And does anyone have a video for that ?
I don’t have a video on that but you can definitely do it. You’d just have to use a test light to figure out which wire at the headlights switch is for DRL and tap into that, or run a wire out the the DRL socket wiring. Reverse is a bit more tricky… I think you’d have to tap into the reverse lights.
Were your old mirrors heated? Mine weren’t so what would i do to make the new heated function work ?
Mine already had defrost. You'd have to do some additional custom wiring if you wanted to add defrost to a truck that never had it since there's no dedicated switch for it I would think.
When I’m applying the blue wire into the green plug, how would I go to put that brown wire and the blue wire together?
Splice it like the rest of the wires as shown at 1:02:00 using your preferred splicing method. Just gotta jam 1 end of brown wire into 1 end and then the other end of brown along with the blue to the other end.
Would you recommend having the cargo light be only for cargo switch or for reverse bulb? Does that make sense lol?
@@footballlips7675 A lot of people tap into the reverse instead because the mirror lights will also come on when you lock/unlock the truck using your fob. I didn’t want to be “extra” like that and preferred to have manual control via the cargo lamp switch.
@@TonyTheTruckGuy yeah I’m so on the fence about that. My only apprehension is if the light when in reverse will actually hurt me more then help
@@footballlips7675 there’s a bit of a shroud around the light on the mirror so it doesn’t blind you when backing up if that’s what you’re concerned about. There’s a reverse fuse in the fuse box under the hood you can tap into for reverse power and if you don’t like it then switch it to dome.
@@TonyTheTruckGuy true can always switch! Thanh you
@@footballlips7675 No problem, good luck!
What year truck did you install these on?
2003
I’m also in MN, I have a 2003 Chevy Silverado 2500HD and recently when I tried to start my truck I only hear a click but the truck doesn’t start. The headlights, radio, locks etc work
Hey neighbor! 😎 Just a faint click as like a relay inside the cab? Or a more solid click like the starter itself? If it's the latter, your starter is likely out because the clicking at the starter is the solenoid engaging and trying initiate the starter itself with no response from the starter motor. Mine still works on this truck but the starter on my "01 Sierra did the same thing and crapped out on me.
@@TonyTheTruckGuy Hi, a solid click! Do you have a Facebook page or even an email? I can send you a video of what I’m hearing.
@@briizcustoms9543 Probably starter then but you're more than welcome to post a video to my Tony The Truck Guy Facebook page or email to Tonythetruckguy@Gmail.com
Love the video! It’s very helpful. Hopefully putting my new mirrors on Tomorrow night. My only question is that I want the reverse lights to come on everytime I put my pickup in reverse. So where do I tap that into?
You’d have to run the wire and tap into the reverse light wiring at the tail light unless you can find a wiring schematic that shows somewhere closer to the cab to tap in like maybe the fuse box if there’s a reverse light fuse.
Tap into the trl back up fuse
Did you have to do any extra wiring for your drls? I bought some yitamotor tow mirrors for my avalanche and my drls arent working so ive been oitsourcing to figure it out, everything else works but my drl white lights
@@codywheelus4887 If you mean the forward facing lights on the mirrors, mine are markers not DRL. They only come on when the headlight switch is in marker or headlight position, unless it’s on auto and it’s dark enough to trigger headlights.
With the blue wire for the running lights spliced into the brown/white wire, do the lights come on with the switch on auto, or does it have to be turned to marker lights/headlights for them to come on?
Good question honestly, I've never paid attention lol. I'll have to check!
@@TonyTheTruckGuyit comes on auto right ?
@@cody6.6max Had it running in the field the other day with switch in auto position and the mirror markers came on with the headlights.
@ thanks
So what would i do if i wanted the white led to be on as like a drl kind of like cateye drl headlights with the white bar? I have drl white light bar headlights that are come on whenever i turn my truck on no matter what and would like the led bar on the tow mirror to do the same, any suggestions ?
@@BrittonPascual You would have to order the mirrors so that they are set up for the white to be on as the DRL. It’s all about how the mirrors are wired
What did ya come up with Britton ?
Hey, I was trying to find your video about programming a key fob for Toyota. It was on another video you said look out for that in the future it was about two years ago. I was wondering if you could send a link or give me some information on how to do that. The guy at the dealership said that you shouldn’t have to program it he just replace the battery and now all of a sudden my key fob doesn’t work.
If it’s just battery replacement then you shouldn’t have to reprogram. Double check there’s no sticker or plastic on either side of the battery and that it’s secure/making a good connection. And of course make sure it’s not in upside down. I’ll find the video and post it for you though here
Key fob programming video - ruclips.net/video/wTIpQTAIgtI/видео.htmlsi=MYNNV4zashf9WNzO
Hey man I just installed these the same way you did. But whenever I have my headlights on, the running lights turn orange but when I turn the headlights off, the running lights go to white. When the truck is off they work correctly but when the truck is on it does that. I wired it the same way you did. Would you have any ideas why it does that?
Not sure why it would work fine with the truck off and then not with it running that makes zero sense unless you tapped into an ignition power source instead of the headlight switch. Might have some wires crossed because the white should be running light not orange, just the blinker should be orange. I’d give everything another look over to triple check it’s all connected right and if you’re still having issues then maybe snip the running light wire and see if the blinkers and everything are working properly. Might have to tap into a different wire on yours for some reason but mine gave me no issues
Could I do this just for the running lights tho and skip the backup light? How would I do that
@@ryleelent Running lights are plug and play as they feed from the window switch power. Don’t have to wire in the extra stuff if you don’t want.
@@TonyTheTruckGuy well it says the blue wire is for running lights and mine aren’t working I even put them to direct power and still nothing
@@ryleelent My bad, I just did another mirror video and those were a bit different lol. Yes, the blue would need to go to power and then the gray wire needs to be grounded. You can leave the white alone if you don't care about the dome/reverse light. There's a 10mm nut on a stud down by the parking brake area that you can run the grounds to if you want and then there's a fuse under the hood I think for trailer marker that you could tap into for the running light power.
@@TonyTheTruckGuy thanks I’ll give that a try
@@TonyTheTruckGuy just thought of this I tried putting direct power with a charged battery and put the blue to positive and grey to ground and they still didn’t work are my mirrors just junk?
Do I need extra wire like you have and do I have to route them through the cab like you did or can I just plug them into the old ports and use them that way
They come with all the wiring. You can just plug the new mirrors into the door panels like the old mirrors and use them like that, you just won’t have a forward facing running light or the rear facing backup/cargo lights on the mirror.
@@TonyTheTruckGuy ok thank you for the info great video aswell
@@Killer-xn3qf Thanks!
And problems with adjusting them? Im looking at buying these because I already have an aftermarket set on my truck but they wont adjust like they should to see out of them properly.
Both these mirrors adjusted up/down and left/right as I needed them to. I don’t adjust constantly but I didn’t have any issues setting my initial adjustment.
Will the wiring work with an 02
Not sure. They are marketed for 03-07 so you’d have to take your 02 door panel down and see if the connectors look the same. I would guess they would work but I don’t know for sure.
Thanks brotha you saved my bacon. Let us know, if you found a way to shut all the lights off, while the truck is running.
You can spam the round dome light override button by the headlight switch I think 6 times and it will disable the DRL’s. My switch must be messed up though because it wasn’t working lol.
ruclips.net/video/-milaRZxAXQ/видео.htmlsi=ezBedDp5F2Rzssjj
Your stock mirrors had power extending, how come you lose that function with the new ones?
Because the new ones simply don’t have a motor in them and are a different style. They would cost 2-3 times as much if they added that function probably.
wassuh tony its adrian from clearwater wassuh my boy
Ayyy! 😂😂 Sorry we got separated the other night, you still out there?
@@TonyTheTruckGuy yeah , we def gotta run it back some time
@@adriansoto3204 Here until Thursday. At Jamminz Beach Bar RN lol
Do you have the stock one? Would you like to buy it if it is available
Stock what?
Sorry, stock mirrors. I saw your post on the upgrade, and I'm looking for the stock ones
Mirrors for 04 Duramax
@@99bcamacho I do have the old ones I took off but You'd be better off buying cheap new ones because these are pretty beat.
I like the stock retractable. I've not been able to find new ones. That retract and extend for towing electronically. Mine gave out, so I'm trying to find stock ones that work
Hey man, just put them on everything works great. Only thing is when I turn on the heated glass the little light indicator on the mirror doesn’t light up even tho the heated glass actually works
It’s not supposed to light up haha. The heated mirror logo is just etched or printed onto the glass like the “objects in mirror are larger than they appear” message that you always see on passenger side mirrors.
@@TonyTheTruckGuyokay awesome haha - and props to you for the fast reply months after the video was made
@@camerongill5200 Always!
Great video, i just ordered the same mirrors and after watching your video i was planning on installing them the same, only problem is that im installing them on a suburban 😑 it doesn't have the dome light like your truck mines got the back window wiper instead, how would you recommend me installing them??
You’d have to wire yours into reverse then, or add a separate switch and run the cargo light wire to that.
Thank you for the quick reply.
@@JoseRamirez-jf6mh Any time!
Look I’m a dodge!
Would really prefer more videos on a 2007 Toyota corolla. Say, how to replace calipers?
I do have a video coming up on replacing pads/rotors on a 2007 corolla, but no calipers at this time. I will be replacing them in a few weeks though, and I'll be making a video on it then.
So what would i do if i wanted the white led to be on as like a drl kind of like cateye drl headlights with the white bar? I have drl white light bar headlights that are come on whenever i turn my truck on no matter what and would like the led bar on the tow mirror to do the same, any suggestions ?