Thanks for making this video in the Toliss 320 how do you request PDC. On the Fenix you send origin/dest Current ATIS and Aircraft type and current stand. VATSIM controller then sends back the clearance.
was a really great video, and i really need your help setting up my system since i got toliss A320N version for my xplane 11 trying to use the CPDLC but doesn't work every time try to establish a connection with ATC get notification failed message and i have an account on Vatsim and also Hoppie, if you have a fix for my problem it will be great and appreciated.
Is this for X-Plane only or can I do this for MSFS as well? I don’t fly online but I love the automatic responses just to add to the realism. Tested on ToLiss and works brilliantly but would love to try it on the Fenix as well even though that one hasn’t got as many options for requests
It should work on MSFS as well. Please leave a comment after testing. The messaging follows the official structure, but I'm open to tune it for MSFS as well
@@JakubKubrynski just done a few tests with the Fenix A320. It isn’t as detailed as the ToLiss regarding options to choose but the direct to and FLT/ALT request worked and gave a reply. The pre departure clearance though is through the AOC ATC Request menu. Completed the pre departure clearance page then when pressed send it doesn’t go through DCDU, it just gives a message saying “clearance request received, standby” and then never gives me one, however I think that could be a limitation of Fenix May try the A32NX at some point and I’ll try Oceanic going to Hawaii
HI, I am trying to get this to work, but when entering EPWW it says notif failed, I have registered and pasted my HOPPIE code, save on toliss system, started FMS etc, but keep getting not failed, I have registered with VATSIM network, I have even tried to do it online with ATC that are CPDLC capable, but still shows the same notif failed. any advise? I appreciated thank you
still any chance to have a glimse at the code ? or could you tell me if the display reply on the mcdu 'station notified zulutime' is part of the code or is the system plug in of the toliss a321 or hoppie? thanks
Are you sure, you're using None network? All messages are recorded here, so check if your callsign is visible: www.hoppie.nl/acars/system/callsign.html?network=None&callsign=EPWW
You should change your topic "XPlane CPDLC Tutorial" into "XPlane CPDLC Tutorial with an TolISS Aircraft". You don't say anything about a configuration for other airplanes.
I believe the key to use CPDLC is sims is to register in Hoppie, select correct network and use provided station. The only thing that differs between planes is how you enter hoppie logon code, and where to find cpdlc in the FMS. Which plane are do you use?
@@JakubKubrynski Thanks Jakub. I am using this tutorial for X plane and MSFS and it is the same thing. As you said, the only difference is place where to put hoppie logon.
Great video it helped me out. Thanks
accurate and simple video. Thank you
Great tutorial, helped a lot!
Thanks for this video!
Thanks for making this video in the Toliss 320 how do you request PDC. On the Fenix you send origin/dest Current ATIS and Aircraft type and current stand. VATSIM controller then sends back the clearance.
Toliss est fait pour nous !
was a really great video, and i really need your help setting up my system since i got toliss A320N version for my xplane 11 trying to use the CPDLC but doesn't work every time try to establish a connection with ATC get notification failed message and i have an account on Vatsim and also Hoppie, if you have a fix for my problem it will be great and appreciated.
Is this for X-Plane only or can I do this for MSFS as well? I don’t fly online but I love the automatic responses just to add to the realism. Tested on ToLiss and works brilliantly but would love to try it on the Fenix as well even though that one hasn’t got as many options for requests
It should work on MSFS as well. Please leave a comment after testing. The messaging follows the official structure, but I'm open to tune it for MSFS as well
@@JakubKubrynski just done a few tests with the Fenix A320. It isn’t as detailed as the ToLiss regarding options to choose but the direct to and FLT/ALT request worked and gave a reply. The pre departure clearance though is through the AOC ATC Request menu. Completed the pre departure clearance page then when pressed send it doesn’t go through DCDU, it just gives a message saying “clearance request received, standby” and then never gives me one, however I think that could be a limitation of Fenix
May try the A32NX at some point and I’ll try Oceanic going to Hawaii
Thank you very very much, really appreciate!!! one query, how should i do in order to get the metar from the departure or arrival airport?
Hi! It's not supported yet. I'll check after Easter if it's possible to add it
@@JakubKubrynski thank you very much my friend!!
HI, I am trying to get this to work, but when entering EPWW it says notif failed, I have registered and pasted my HOPPIE code, save on toliss system, started FMS etc, but keep getting not failed, I have registered with VATSIM network, I have even tried to do it online with ATC that are CPDLC capable, but still shows the same notif failed. any advise? I appreciated thank you
To work with EPWW you have to set HOPPIE to the "None" network - are you sure it's done? Which plane do you fly?
what to do if u keep getting send failed? whe i try req higher alt etc
Hi! Currently the station supports only requests listed in the video description
would it be possible to receive the javasript for the EPWW station?
It's in Java
@@JakubKubrynski thank you for your reply. i do have java installed on my mac, so this would be fine if possible. many thanks
still any chance to have a glimse at the code ? or could you tell me if the display reply on the mcdu 'station notified zulutime' is part of the code or is the system plug in of the toliss a321 or hoppie? thanks
@@andrewkuegler please send me an email to my jkubrynski gmail account
Excellent tutorial! I tried EPWW for ATC center but received the message (notify failed) Do you know what is causing this?
Are you sure, you're using None network? All messages are recorded here, so check if your callsign is visible: www.hoppie.nl/acars/system/callsign.html?network=None&callsign=EPWW
@@JakubKubrynski how do I set None network, I am not getting any DCDU msg when I click notify but I get confirmation that EPWW has been notified
@@flightsimiceland Check the video from 1:00 ruclips.net/video/6Zl-o9pIU-E/видео.html
Is that the only atc station you can logon to offline
AFAIK yes. If you want other then the only option is to run the standalone station yourself
You should change your topic "XPlane CPDLC Tutorial" into "XPlane CPDLC Tutorial with an TolISS Aircraft". You don't say anything about a configuration for other airplanes.
I believe the key to use CPDLC is sims is to register in Hoppie, select correct network and use provided station. The only thing that differs between planes is how you enter hoppie logon code, and where to find cpdlc in the FMS. Which plane are do you use?
@@JakubKubrynski Thanks Jakub. I am using this tutorial for X plane and MSFS and it is the same thing. As you said, the only difference is place where to put hoppie logon.