Change Your Duramax Diesel 3.0L LZ0 Engine Oil & Filter
HTML-код
- Опубликовано: 16 июл 2024
- Today we explore the mighty Duramax Diesel 3.0L LZ0 and find out how much oil she wants. Note: It was more than the 7 advertised quarts
Products Used:
➤ Amsoil 0w-20 Diesel - bit.ly/3W7CbtV
➤ WIX Filter - WL10351 - amzn.to/3QeHnZb
I used 9 quarts during my oil change, one was a flush quart that other was 1 extra to make sure it was on the dip stick after being warm.
Sponsor: Lethal Garage Synthetics!
➤ Use the same AMSOIL oil I trust and save 25%: www.amsoil.com/offers/pc/?zo=...
➤ Lethal Garage Inc. - bit.ly/2BxSCVO
---------------------
Lethal Garage Store! (Support the Channel)
➤ Lethal Garage Store: bit.ly/2rJLrCo
➤ Lethal Garage Flex Fuel Kits - bit.ly/2BxSCVO
Amazon Link:
➤ Support Lethal Garage when you shop Amazon! Use this link to browse and shop: amzn.to/2KHClQr
Codes from Supporting Vendors!
➤ Save 5% on select products via Phastek Performance by using LETHAL5 at checkout - bit.ly/2g7Cmix
➤ Save 5% on all ZL1 Addons parts and accessories with coupon code lethal5 - bit.ly/2gCQBzg
➤ Save 10% on all 6th Gen Gen5DIY Plug and Play Harnesses with coupon code Lethal10 - bit.ly/39vRPo1 
Авто/Мото
I wouldn’t worry about flushing the little bit of oil out after it drains.
Have a 2021 LM2 with 47k miles and only used amsoil. The oil will be just as black at 500 miles as it is at 6500 when you change it.
Diesels are dirty. I will say every few tanks of gas it’s worth it to throw in some amsoil all in one, hot shots edc, or archoil fuel treatment. You’ll notice a difference in how it runs.
Make sure you take DEF fluid with you. I just had an issue with my 2024 ZR2 3.0 and had to stop every 125 miles and add a gal to keep it from shutting down on me. Had to have it reprogrammed when I got back to SLC sensor was not reading correctly. This only happened when I was towing.
Odd issue, will keep an eye out.
Happy to report no issues
The 3.0 takes 7 quarts. You should put 7 quarts in it. An accurate reading = warm, on a level surface, engine off after ~5 minutes to drain down, and then check the stick. A quart over likely isn't going to hurt anything, but it's throwing money away for no reason. Yes, GM overfills a quart at the factory because it uses a bit for about the first 2k miles as the rings seat. The engines get the necessary break-in hours on them before ever seeing a chassis. Take it off the lot, check at 500mi, recheck 1kmi, recheck 2kmi, and then get the free dealer change at 5k. And then EVERY 5k or 20% and no more. Playing the 7500mi or 0% game is dancing with the devil. The tolerances in these things are very tight. Be nice to them and they'll be reliable. And that's not real specific to the 3.0. Pretty much all of these newer engines running these thin oils need the same diligence in maintenance. Doesn't matter if you use Amsoil, Mobil1, etc or the standard ACdelco. Run whatever you want that meets or exceeds Dexos spec and be religious about the proper interval, because both of those things are required for a successful powertrain warranty claim. GM will do everything possible to get out of warranty liability, so keep good records and receipts if you change your own oil.
That was done and it needed 8
Wix 👌
Do you know if 2024 Yukon has LZO in it ? Or still got the older one ? I know pickups has the new 305 hp LZO
@@WhiteoutSnowy They replaced the old diesel with the LZO in all models.
What does your oil pressure run? Mine only ever runs about 30psi since brand new
Idle it looks to be 25psi, and climbs when driving.
I have 2 cars now with the variable displacement oil pump. It kills me to see how low of oil pressure it runs at lower RPMs. But what you’re running is the “new normal”
@@slscamg The idea is oil flow not pressure. New engines use a thinner oil that flows much faster. The spec for decades and decades was 10 psi for every 1000 RPM. So 25 psi at idle is fine. When the engine is under load or at high RPM, it'll instantly boost oil pressure to between 40 and 60 psi.
Ive been using oem oil for 3 years. I want to make the switch over to amsoil on my next oil change. Do i need to do an engine flush first or can i just straight up switch it over without problems?
Just straight swap
@@Lethalgarage cool thx
I put my truck on ramps so I can get as much of the oil out as possible.
Do you have a fuel filter on your Duramax.
Like a better one? Currently just the stock filter
Your book tells you to wait a bit for the oil to drain into the pan before checking it.
What you didn’t see was 15 minutes of letting the truck sit idle as I mentioned in the video.
tree hair