I have a 2004 4th gen 4Runner and I gotta to say this is perhaps the best headlight view online for this particular vehicle. Guys I really appreciate you making videos on 4th gens especially with such detail. You just got yourself a new customer and perhaps many more on the gen 4th community! I can't wait to spread the word. Thank you
My current low beam LED setup on my newly purchased 2008 V6 4Runner creates static when playing the radio. I think there are mini cooling fans on the LED light. Interference? Thoughts? Thanks.
Looked on Amazon for theses for mine, not the cost you mentioned. What's the part number that would fit mine? It's a 07 4runner, would like to get all 3 sets. Any help where I can get them?
I went to your website from the links above, the high beams show fitment of model year 03-09, and low beams of 06-09. I have a 2005 and am confused if the low beams will fit. As far as I know the 2003-2009 4runner headlights are all the same. Can you help to clarify?
@@HeadlightRevolution thank you for clarifying! Do you have a suggested 9006 bulb for the 05 that pairs well with the extreme led pro high beam mentioned in this video? Thanks!
I have a 2006 SR5 and I have both headlight assembly ordered. Both have condensation in them. I and adding a new fender inerwell liner mine was ripped off. I figure that was most of the cause from water from tires. Not sure. Has anyone had issues with both headlights fogging with mosture?
I have condensation in the driver side headlight assembly. I want a brand for my 2004 4runner that will hold up smoky black color headlight assembly. Headlight revolution doesn't make for my year 4th gen
I have a new 2022 4Runner SR5 Premium and the OEM LED headlights cast a “dark spot” on the road that’s very distracting. Any thoughts or knowledge of this? Dealer can’t explain why the spot is there.
I tried to replace my son's halogen low beams with h11 but they do not fit. Could Toyota use a different bulb on some vin numbers? I had to return them to the auto part store.
Wait LED bulbs in a reflector housing? Isn't that beam pattern going to scatter? I've heard from other people that LED bulbs in reflector housing isn't good if you don't have a projector housing to control the beam pattern, is that true? I wanted to get myself a LED set over HID but I'm afraid that I will be blinding other drivers. My 2012 impreza sport limited is doing just fine with cheap HID beaming it lower but I love the outcome of the LED's but the impreza's don't have a projector housing, only reflector. Will the LED bulb glare or will it be ok? Love to purchase a set.
They have a video explaining what to look for when buying an LED. You have to make sure the position of the LED matches the position of the filament on an original Halogen bulb
It really depends on your make/model vehicle and bulb you choose. We found that the XD LED pro works amazing in the 03-09 4runner. Let me try to dig up a second video for you to watch to explain it a little better.
Did the install of the can bus bulb eliminate the function of the day time running lights? On the 03-05 4runners, equipped with dtrl's, they will always be on when the parking brake is disengaged.
I have a question, I bought the switchback turn signal light and would like to know if in Daytime running light works in white color or not in my 4 runner 2005?
Did your 4Runner come with day time running lights from the factory? If not, your turn signal is a dual filament bulb, which means that a switchback bulb will not work properly.
I have a 2004 4th gen 4Runner and I gotta to say this is perhaps the best headlight view online for this particular vehicle. Guys I really appreciate you making videos on 4th gens especially with such detail. You just got yourself a new customer and perhaps many more on the gen 4th community! I can't wait to spread the word. Thank you
Thank you so much for the support! It means a lot to us and it makes all the work worthwhile. Thank you for watching. -Chris W
Only 03-05 had the reflector housings. Anything on the performance of these bulbs in the 06-09 projector housings?
We don't have a video on it but these would also work on a 06-09 with projector housings.
Led in 06+ headlights are trash no matter what brand. You get no width in the projectors, horrible output.
@@imthehink my auxbeam bulbs work great in my 06 headlights. Clean light with no breaks and plenty of width.
My current low beam LED setup on my newly purchased 2008 V6 4Runner creates static when playing the radio. I think there are mini cooling fans on the LED light. Interference? Thoughts? Thanks.
Definitely interference, we recommend trying these: www.headlightrevolution.com/radio-static-reducer-rings-B-FERRITE_2?quantity=1
Looked on Amazon for theses for mine, not the cost you mentioned. What's the part number that would fit mine? It's a 07 4runner, would like to get all 3 sets. Any help where I can get them?
Very nice rig. Gorgeous man 🤙🏽
Thanks! 🤘
I have an 05 ,with an arb bumper upgrade what do yall offer for that fog light set up ? Thx in advance.
So these are significantly brighter than the gtr ultra V3, I thought those were then best 😓
Is it the same if you have the halogen headlights? What kind of lift is that? I have a 07 4runner
Those were the halogen headlights
I meant projectors headlights
It's most likely different bulb size
You will need the H11 bulbs for your 07 4runner. We aren't quite sure what lift was installed on this truck unfortunately.
I wanna know how you cut that bumper lol. Just an edge cut?
This was a customer vehicle!
I went to your website from the links above, the high beams show fitment of model year 03-09, and low beams of 06-09. I have a 2005 and am confused if the low beams will fit. As far as I know the 2003-2009 4runner headlights are all the same. Can you help to clarify?
The 03-05 4Runner uses the 9006 bulb style for low beam, however the 06+ models use an H11 bulb type instead.
@@HeadlightRevolution thank you for clarifying! Do you have a suggested 9006 bulb for the 05 that pairs well with the extreme led pro high beam mentioned in this video? Thanks!
@@jnuechte have you gotten them ?
Yes I did, installed and all is good. Very happy with them.@@cameronduhh
I have a 2006 SR5 and I have both headlight assembly ordered. Both have condensation in them. I and adding a new fender inerwell liner mine was ripped off. I figure that was most of the cause from water from tires. Not sure. Has anyone had issues with both headlights fogging with mosture?
Sounds like a bad seal on the headlight or the bulb!
I have condensation in the driver side headlight assembly. I want a brand for my 2004 4runner that will hold up smoky black color headlight assembly. Headlight revolution doesn't make for my year 4th gen
All of the xenon light bulbs i buy before always flickering till i got phillips
In some cases there are some vehicles that require a resistor to prevent lights from hyper flashing.
Hello, saw your vid very nice followed to website but cannot find any interior lighting for 03-09 4Runner
You can find all of the interior bulbs for your 4Runner here!
www.xenondepot.com/buyer-guide-by-vehicle/2003_Toyota_4Runner
Headlight Revolution
Thank you very much!
You're very welcome!
I have a new 2022 4Runner SR5 Premium and the OEM LED headlights cast a “dark spot” on the road that’s very distracting. Any thoughts or knowledge of this? Dealer can’t explain why the spot is there.
Most likely part of the headlight design, why it's designed that way, we couldn't tell you!
Can you do installation on a h7 bulb
We have multiple!
Headlight Revolution can you send the link? And do you have available h7 plug and play? No resistor needed?
Are these h7 perfectfit headlights are good? headlightrevolution.com/headlight-revolution-perfectfit-led-headlights-h7-bulbs/
I tried to replace my son's halogen low beams with h11 but they do not fit. Could Toyota use a different bulb on some vin numbers? I had to return them to the auto part store.
Send us a picture of your original low beam bulb to Sales@HeadlightRevolution.com and we will help you out.
I have the 4th gen with the projector headlights, would this work on it? The 4th gen you worked on had reflector headlights
I was going to ask the the same.
Yep! Low beam bulb will be the H11. Your high beam will be the 9006.
What was the brand and model# for the turn signal ones? Where can I get them and would they fit a 07 4runner? Thanks again
Check these out headlightrevolution.com/led-headlight-bulbs/xenon-depot-xtreme-led-pro/
Can someone link me to the second gen Tacoma video!? Wait...is there one???
Not yet! Hopefully soon!
@@HeadlightRevolution that would be awesome! im sure alot of people would enjoy!
Wait LED bulbs in a reflector housing? Isn't that beam pattern going to scatter? I've heard from other people that LED bulbs in reflector housing isn't good if you don't have a projector housing to control the beam pattern, is that true? I wanted to get myself a LED set over HID but I'm afraid that I will be blinding other drivers. My 2012 impreza sport limited is doing just fine with cheap HID beaming it lower but I love the outcome of the LED's but the impreza's don't have a projector housing, only reflector. Will the LED bulb glare or will it be ok? Love to purchase a set.
They have a video explaining what to look for when buying an LED. You have to make sure the position of the LED matches the position of the filament on an original Halogen bulb
@@Harzman01 Can you link me the video please and thanks for the reply.
It really depends on your make/model vehicle and bulb you choose. We found that the XD LED pro works amazing in the 03-09 4runner. Let me try to dig up a second video for you to watch to explain it a little better.
ruclips.net/video/DeaDrH0gXZk/видео.html
@@HeadlightRevolution I have a 2012 Subaru impreza sport limited wagon.
Did the install of the can bus bulb eliminate the function of the day time running lights? On the 03-05 4runners, equipped with dtrl's, they will always be on when the parking brake is disengaged.
how to adjust headlights
Hey, the turnsignal bulb is missing in the links
Thanks, the listing is updated!
I installed the turn signal light and it's fast flashing and the white color doesn't work, how can I fix it?
This could be caused by a few things. Reach out to us and we can get that fixed for you!
Sales@HeadlightRevolution.com
I have a question, I bought the switchback turn signal light and would like to know if in Daytime running light works in white color or not in my 4 runner 2005?
Did your 4Runner come with day time running lights from the factory?
If not, your turn signal is a dual filament bulb, which means that a switchback bulb will not work properly.
What tires is that and rims?
Not sure unfortunately. This was a customers rig.
this fit 2008 model?
Yes.
Test it on the road
Thanks for the recommendation. We will keep that in mind for future videos.
Mine interfere with my key fob. Anyone else have that problem?
Shoot us an email at Sales@headlightrevolution.com