Centre clip holds them and there is an option to use screws in the back. Some of the the new diffusers now have better cutouts so you don't have to cut them.
Well i had ago i dousnt clip in iv screwed it down on the bottom and it cliped in there but the tabs will need screwing i tryed to screw them but ended op with screw coming out making tiny hole so gave up its on strong but maxton its a sh- fit
I just installed a maxton diffuser, from Maxton Design. Do NOT buy that one, it is one hell of a hassle to install and is really the cheapest of the cheap. If this part has all the clips and even the reflector middle clip hole already in place get this one and save hours of your time.
It looks like a lot easier to install than a Maxton, i really wanna know which one this is. it can click into place, no need to drill on the backside. Please tell me which Brand it is. Greetings
@@lorenzototi3840 you need to drill the holes but I have a 120d so for me, removal of the whole bumper is needed because it’s impossible to screw from under the car, 0 space for drill or hands.
@t so it isn’t the same as video, with zaero you need to remove entire bumper. Maybe also with diffuser used un video if you have diesel.. am I right? Thanks
I was about to pay someone to do this for me. Thanks for the vid!!!
Love the chill bird sounds
Mate, thankyou so much for this. Saved me loads of money . Top video!
doing it with the car on the ground looks like a major PITA
This is a lot easier than the rieger one, I had to take the whole bumper off to fit it!
Just ordered this this morning! Buzzing!!
Got the same tips. Nice! Akropovic ftw
That went on as easy as the oem come off
Much better than maxton. Don't need to remove the bumper. 4:49
Put old Diffusor back on and screw bolts in?????
Does this one actually clip into place using the OEM fixings? Or do you have to bend the clips into place like most others?
OEM fittings. Just push and click
Where's it from please mate? Bought a Zaero one and cba with drilling the clips and taking the bumper off, and the reflectors just fall back out 🙄
@@lewsmz3238 in the description
Looks nice!
Just got this delivered, going to attempt it myself. Hopefully isn’t too much of a faf
Easy peasy!
Does this ship to Sweden?
Looks great. What is holding the reflectors in place in the new diffuser though?
Centre clip holds them and there is an option to use screws in the back. Some of the the new diffusers now have better cutouts so you don't have to cut them.
What's that piece above the right reflector that falls out when you pull the original one off? Is it the cover for a tow hook?
Yes
I thought it'd be harder to install! Thanks for the vid mate. What size is the akra tips btw? 3"?
Nah easy! 4.5"
I ordered mine on Saturday. How long does delivery take?
Do you need to disconnect battery or anything , will it do anything do airbags ?
No, do not need
Can I just ask, did you have the car jacked up atall? Or did you manage this with the car flat on the ground? I can tell if I can see a jack or not
Flat on the ground 👍
How long did the full process take mate?
Hello, do you deliver in france?
Hi mate good video but would this system work for the maxton one thanks in advanse
Yeah it's the same 👍🏻
@@Carjackd great thanks you made it look like a child could do it bet i fk it up ;)
Well i had ago i dousnt clip in iv screwed it down on the bottom and it cliped in there but the tabs will need screwing i tryed to screw them but ended op with screw coming out making tiny hole so gave up its on strong but maxton its a sh- fit
What happens to the rear park sensor?
Not affected, sensors are in the bumper
Hi mate where did you get your tips from? And did they just slip on to the standard box?
Email me: info@carjackd.co.uk
@@Carjackd Hi, is a delivery in france possible? thank you
Hi, does this fit pre lci?
hi bro, I know this video is from a year ago but do you still have the exhaust tips and diffuser for sell
Yes, on the website in description. Or email me. Info@carjackd.co.uk
is this a maxton diffuser? looking to do mine soon!
Similar but not maxton, link in description
Would this fit a 116d
Hi, see website for 116d (f20 version)
I just installed a maxton diffuser, from Maxton Design. Do NOT buy that one, it is one hell of a hassle to install and is really the cheapest of the cheap. If this part has all the clips and even the reflector middle clip hole already in place get this one and save hours of your time.
Where do I get this
It looks like a lot easier to install than a Maxton, i really wanna know which one this is.
it can click into place, no need to drill on the backside. Please tell me which Brand it is. Greetings
carjackd.co.uk/products/m135i-lci-m140i-rear-diffuser?_pos=1&_sid=052d89adb&_ss=r
@@Carjackd thanks alot buddy
Does it fit a M240i?
Hi, no. Just for 1 series.
Ou commander le même diffuseur que lui ?
Maxton design
Do u know if it is the same for the zaero design diffuser ?
Hello, have you bought the zaero diffuser? Is is the same? Thank you
@@lorenzototi3840 it’s same
Thank you, have you have to drill holes on zaero diffuser? “Clicks” works in same way? Thank you again
@@lorenzototi3840 you need to drill the holes but I have a 120d so for me, removal of the whole bumper is needed because it’s impossible to screw from under the car, 0 space for drill or hands.
@t so it isn’t the same as video, with zaero you need to remove entire bumper.
Maybe also with diffuser used un video if you have diesel.. am I right? Thanks
Any discount codes?🤓
Is this the same process for a zaero rear diffuser for this car ?
Which Diffusor is it, is it a Maxton ?
Aliexpress
I don’t think I could trust just the bottom bolts holding it on, I removed my whole bumper and use self tappers on all the tabs to hold mine
What you done to the exhaust mate?
Bob Williams back box mod and VRSF sports cat 👍
Does it fit on a 2018 120i M ?
No mate, this has twin exhausts (one on either side) 120i has it just on the one side
Now you have 500 pounds of downforce 😊