How to install F1 Rain light || BMW M140i F20 || DIY Tutorial || Ali express
HTML-код
- Опубликовано: 14 окт 2024
- Quick DIY Tutorial on how to wire up and install a F1 Rainlight onto the diffuser of a BMW M140i / f20 / 1 series etc.
I purchased this from Ali express - tbh they're all the same so just search up for an F1 light on there. Just make sure you waterproof seal the edges.
Note: I ran out of solder. so only connected by twisting the wires and taped it up temporarily - off camera I went back and soldered the connections. You can either do the same, or use some T connector clips.
Affiliate links
Insta360 X3 5.7k Camera:
www.insta360.c...
Use the link below to purchase your Bluetooth OBDeleven Adapter:
obdeleven.com?aff=54
carly device:
www.mycarly.co...
================================================
Follow me on Social Media!
1. help me get to 8000 subs by subscribing! --- bit.ly/1baBqhL
2. My RUclips channels Instagram -- @rp_m140i
Where would you connect the yellow if you wanted the light to pulsate?
Al azul lo conectas lo acabo de hacer
Los cables de la luz lo puedes meter en los pin y ir probando haci lo hice yo
Blue/black
I'm in the process of doing it now, where do I connect the yellow wire as I want it to flash when I brake?
That’s what I wanna know myself
hi, fitted mine today, a cartek static one to my f21, unsure if wired the live to brake light wire though, tried to black wire with grey stripe as advised first, didnt light up at all, so wired to grey wire with black stripe now it is lit up all the time when running, i want it to just come on when pressing brake pedal, can you advise on this please?
Mine is same ? Have you managed to fix it?
If we want to connect the yellow one, which wire does that connect to?
Blue/black
I've done exactly the same as you but I want the light to flash when breaking if that's possible?
Bro are those 2 strips led build in to the tail lights or is it 1 or the bulb in the socket
Where does the yellow wire go into please
hey man. great tutorial. is there any way you can make the light turn on only when you break but without it flashing???? thank you
Yes, you just have to connect the wires to your break light connectors
Please, do you know what is the color of the wire for break light on the same light as the video ? BMW F1 2018
@@raphaelvibert6540 The mine work like that,
@@G-Strike Like what ? 🤣
Ouch, drilling your diffuser with a masonry drill bit? +1 for having the balls!
I agree! 😂😂😂
Hi great video but where do you connect the yellow wire if I want it to flash when breaking
Did you ever find out where the yellow wire goes
Same question!
brake light is easy and convenient to install without refitting the circuit. Wiring: connect the yellow line to the brake strobe (+), the red line to the taillight or ACC(+), and the black line to the negative-).
The guy Is not good
Blue/black for yellow wire for get flashing at brake
What did you use to create the gap in the coating of the wire
Hi! Top video thank you I installed the same light on my car, when I turn on the ignition without turning on the engine, it works Niquel, on the other hand as soon as I turn on the engine, it works during braking and then nothing... you don't know how I could fix this?
I have the same issue, found a fix?
@@DesignsDoD Yes my solution to the problem was to connect it to the central rear lights and not to the left and right lights
@@Inconnue269 thanks!
does the flash keep flashing or does it stop after X amount of flashes?
What shade tints did you use for the rear brake lights? Thanks
I’m the middle of fitting one where does yellow go
Where do you connect the yellow if you want it to flash
How I can conected f1 light to my e46 bmw 2000 318i I and also where put yellow for flashing
Blue/black
Hi do you fit these rain light
Also connecting the yellow will impact your DAB radio. It’ll keep cutting out just so everyone knows I had that issue
does it work for 118i ?
Where do u apply the waterproof adhesive
Corners as he said
Mine is always on? Any reason why?
This is nearly as tragic as 4D number plates!
U didn’t connect the wire very well.
Good video , can u help me do mine I’ll pay 🤣
Mine is flashing
You didn't show much of the finish product! I was expecting foot on and off the brake pedal numerous times and a night video shot! Disappointed!
If you watched the video, you'll know it wasn't connected to the brakes, so brake pedal on or off wouldn't have made a difference. But TY for the feedback 🙌🏼
brake light is easy and convenient to install without refitting the circuit. Wiring: connect the yellow line to the brake strobe (+), the red line to the taillight or ACC(+), and the black line to the negative-).
@@fodoom7403 👍