Ok, what would you need to use a 9v Battery? Resistors on the leds only or a resistor on the board as well? Was thinking of doing this with 7 0402 (pico) leds connected.
Yeah, I noticed that too. Obviously the second arrangement is correct, because that's the one that was shown working. He must have got his animation switched the wrong way round.
Indicas en la ilustracion polaridad de circuito de una manera, cuando conectas la pila lo haces de la manera contraria .. es decir indicas negativo y ahi conectas el positivo de la pila..... es necesaria la polaridad del circuito o se puede conectar en cualquier polo ???
Riddim Dubstep No it doesn’t, the video clearly shows otherwise, as the lights are wired with opposite polarity to one another, the alternating polarity of the clock component switches between matching one led’s polarity to the other and so on... So no, the led’s don’t flash at the same time, and this is easier than the resonant circuit, though the resonant circuit does allow more freedom of design and is most likely better quality, this is smaller and easier, therefore people often prefer this method.
This project helped me very much....I am finding e video of making a storbe light at low cost for a long time....Thank u so much... I will ever remain greatfull to u
كنت اصنعها وانا في سن 12 ..شكرا لك ذكرتني بايام الطفولة ..اليوم الالكترونيات تعقدت كثيرا اصبحت البرامج تتحكم بها .لم تعد مجرد ترانزستور وبطارية و مقاومة و ليدات
How long will light last if we use 3.7v mobile battery and a single red led? The clock will last for an year with small battery... wat abt led?? Curious to know!!
can you explain what makes that bulb are turning on and off quickly and are not still light? (hope this makes sense) I need this knowledge to something different but I do not understand how those light are flickering? what parts makes them do that? you know normal flashlight you just turn on and light is on but lights like this police are turning off and on every let's say 0,2 sec. how?
never realized how fast the strobe signal on these clock motors are. I guess if you wanted to make the LED'S strobe slower for this particular App, you could experiment with crystals with a slower Hz. signal .
![[NEW] Simple Electronic Project](http://i.ytimg.com/vi/kPyBkjgl5bI/mqdefault.jpg)
![[NEW] Simple Electronic Project](/img/tr.png)
ruclips.net/video/k0VjsEebK0o/видео.html
Roman UrsuHack How i understand which side is plus and which side is minus on led light?
Roman UrsuHack and I love you videos and I love you have a good day. please ans
MR BEAN UNOFFICIAL standard led works only in one configuration and dont break in second.
Hi I circuit board I lost capacitor value how to find the value
wojciech kolaczkiewicz 😆
I've been looking for tutorials on how to make a police strobe light for my son's electric car, this is by far the best video I've seen. Great job!!
Basically an oscillator from alarm clock used to oscillate the led, nice thinking!
Genial..., adorei, vou arrebentar um relógio que tenho aqui em casa e fazer um brinquedo destes ❗️
Abraço aqui do Brasil 🇧🇷
Nice that you keep everything neatly organised in a box
He doesn't keep it...You get it in organised box from Amazon
Yes.i like it
Watched so many videos, but your one, though without audio is so unique and perfect that in a very short time could understand the concept.
Ok, what would you need to use a 9v Battery? Resistors on the leds only or a resistor on the board as well? Was thinking of doing this with 7 0402 (pico) leds connected.
Simple, but very cool!
is it able to use 12v DC input? I believe the input in your video is 1.5v, because clock mechanism using 1.5v battery..
Very Good. I love it.
Only my eyes...
1:19 '+' left
3:37 '+' right
Yeah, I noticed that too. Obviously the second arrangement is correct, because that's the one that was shown working.
He must have got his animation switched the wrong way round.
I like it. Nice little hack.
Incredible, lad. Even if you did that kind of invention, that is radical!
now every kid gonna strip his mamas clock
Lmaaaoooo
I have already done that before lol
Yeah 😆 fun times
Indicas en la ilustracion polaridad de circuito de una manera, cuando conectas la pila lo haces de la manera contraria .. es decir indicas negativo y ahi conectas el positivo de la pila..... es necesaria la polaridad del circuito o se puede conectar en cualquier polo ???
great video, now i know cheap way to put wing lights on RC plane, cheers!
1.5V circuit ...... 3.7V in ?
Ditto
1.5 v to move clock, 3.7 to feed both LEDs... The circuit isn't overcharged if it is what you think
Excellent trick
Of it's a potted 555 chip which it probably is(why re-invent the wheel) then it will take up to 18v
What kind of led to be use ? Is it flash led ? I've no knowledge on electrical but loved your video.
When soldering the battery holder you solder the positive (red) wire on the right while in video earlier you have mentioned it as negative....?
Good idea. Is it possible to change freq?
Very good thank you very much Evandro from Brazil!!!🇧🇷🇧🇷😁😀💪👉👊
1:26 can u give me the link to where u got that kit from and the 1:56
I don't think those are kits. I think it's just an "adjustable compartment box" with random parts inside.
Or just use 2 transistors, 2 capacitors and 4 resistors. Build a resonant circuit with them. The method you used lights both LEDs at the same time.
Riddim Dubstep No it doesn’t, the video clearly shows otherwise, as the lights are wired with opposite polarity to one another, the alternating polarity of the clock component switches between matching one led’s polarity to the other and so on... So no, the led’s don’t flash at the same time, and this is easier than the resonant circuit, though the resonant circuit does allow more freedom of design and is most likely better quality, this is smaller and easier, therefore people often prefer this method.
great job 👍👍👍👍👍
Super Idee 💡!👍👍👍👍👍
Ahhhgggg! Clean that tip on that iron dude! Neat project by the way. 👍
For 12 v supply what we can do
VERY NICE VIDEO ...BUT MAY ASK SIR THAT TINY SHINY PART THAT YOU LEFT ON THE BOARD..IS THAT A RESISTOR? IF YES HOW MANY OHMS? THANK YOU...
Nice...now do you have any ideas for a more traditional beacon?
You have made a very good video.
What music play in the background, please? Thank you! )
Thats a dope hack , Thank you man now i have like thousands of that chip ill have a party in here with that lights haha
Excelente.
Gracias amigo 👍
Great Job!
So I just did this, and tested first bulb like you did, but mine isn't blinking fast. It's a slow blink...? Why? Also should a resistor be used?
This project helped me very much....I am finding e video of making a storbe light at low cost for a long time....Thank u so much...
I will ever remain greatfull to u
What is the model of your camera?
Yup, just snap it all off. Love the finesse!
كنت اصنعها وانا في سن 12 ..شكرا لك ذكرتني بايام الطفولة ..اليوم الالكترونيات تعقدت كثيرا اصبحت البرامج تتحكم بها .لم تعد مجرد ترانزستور وبطارية و مقاومة و ليدات
Im going two break my home clock and my brother 's toys to test this xD
Good job👍👍👍👍👍👍👍
all type of wall clock cam be done by this or only the alram type clock only can be used
Nice quick video. Very glad you are moving away from those “EVER HOME NEEDS THIS” video. 👍
Thanks for this
Super cool !
Thank you for the tutorial, it was very useful for me
Now the criminals get caught with it
Could you please comment , how the functionality is working . It would be grateful if you provide some information
I just skipped forward to the finish. The music, and the ads were driving me nuts.
1:19 polarity change!
Woow fantastic Awesome
En benotto venden unas lámparas muy buenas... X 70$...cuanto te salio tu caja de chácharas...?
Cool!!👍👍👍👍
what about DIY infrared blaster for phones? this can be useful..
Great idea
Lookout for this guy!
I'm your Big Fan Admin ...I think The Video is Copied But Like The Way You Made It... Copy Appreciated 😁
I like it bro 😀😀😀😀
I saw this on anotther channel claiming it was a strobe, but really was just a slow blink.... Your's DEFFINATLY strobes!! Nice job.
Kya hum 3 ya 4 bulb bhi laga sakte h???plz tell me
Can this work on a button battery??? I need this for a hot wheels
Nice clip & beautiful music
Nice idea
excellent idea. Thank you.
سلام دمت گرم🎉thanks
Awesome!!! Idea
nice work
go to 4:25 ~5:00 and change the speed to 0.25 or 0.5
Now the cops can use that instead
On their skates.
Lol
Hahahaha
Lmao
Segway
how you adjust flashing? this is uncontrolable wild constant flashing!!!
Blink your eyes really quickly.
Wow amazing bro
How long will light last if we use 3.7v mobile battery and a single red led?
The clock will last for an year with small battery... wat abt led?? Curious to know!!
A very good idea, I like your video.
can you explain what makes that bulb are turning on and off quickly and are not still light? (hope this makes sense) I need this knowledge to something different but I do not understand how those light are flickering? what parts makes them do that? you know normal flashlight you just turn on and light is on but lights like this police are turning off and on every let's say 0,2 sec. how?
Thanks. So easy
Love it very much 💕
never realized how fast the strobe signal on these clock motors are.
I guess if you wanted to make the LED'S strobe slower for this particular App, you could experiment with crystals with a slower Hz. signal .
Can i ask?
If that board from a clock
And you using 3.7V Batt.
How about DC 12V?
Is it ok? Or the board
Burn?
Think you need to step down the voltage. Resistor or module.
Thanks a lot
Show parabéns pelo vídeo isso fica legal pra fazer e colocar na bike 👏👏👏👏👍👍👍👍🇧🇷🇧🇷🇧🇷🇧🇷
Verdade...
Excelente ideia! 💡
goodjob sir 😁
NICE idea
You are too good.
Does it works on 12 volts bike battery and 12 volts led light??
Nice idea on my bike
Be nice if you explained what you were using and where to obtain them
Good Idea !!Like !!
thats good idea bro....
Excellent.👍🇬🇧
good job.thanks
good
Amazing bro
Can u send the link for the led kit
How about if you can make the flashing slower or faster??
How about changing the value of the capacitor to slow the blinking down.
Maravilhoso, o único que deu certo para mim, amei❤❤❤
All project items are available in which city?name please.
Nice video Recording and Editing. Which Recording device and editing software you have used for this video?
Sir which edittig software use pannaringa
Like your projects because you give every detail of things
What is the square thing he takes apart at start? I don't recognize it.
@@paulkovanen3464 It was the machine of wall clock
Sensor kaise banta hai
Nice , tks 😍😍😍