Thanks, id did prefer 5000 rp, but is start to ged used to Iwata. But the main differences is the final look of the clear, spraying speed and the ethicknes of the clear on the part. Sata does the job fast, thicker layer and that means less dust to sand and polish but more harsh look, but this last paet depends on the clear. Different clears flows different.
Бро ты красишь так как на заводах именно с помощью LS 400 второй слой получается так нак надо. Меня многие ругали что я так делаю но благодаря такой методике мы получаем правильные цвета. 👍
For the sealer i use Sata 5500x 1.2 i gun. For base- depends on the basecoat. For spies hitec i use the same Sata 5500x 1.2 i while it is sugested from Spies to use it and i totaly agree with them. For Glasurit 100 line i use Iwata Ws400 series2 gun while again, it is the sugested gun from Glasurit technitions and i totaly agree with them. For solvent bases it doesnt matter in my opinnion what gun you use. The best you like. Its not so that i will sugest some gun and you will get perfect results with it. I started my career with Sata gun in year 2006. Then it was a Sata 2000 hvlp 1.3 i think. It was good then and is good now. If you are concerned about that you can't get some silver finish good looking, just practice and try other techiques.
Nice. When i will make enaugh money, i will ask my wife to go to carribean to wacation. So i can spend all the time in your shop to get my money back🤣🤣
PROFESIONAL EXPERIENCE ❤❤❤✌️✌️👍
Thanks👍
following you from Australia mate
Hi Troy. Thank's, im surprised how far RUclips can bring my work. I restored a Riley Pathfinder from Australia years ago. It lives now here in Latvia
A lot of work!
Enjoy and good luck!
God job! Do you prefer the 5000 rp for clear coat instead of ws400 or x5500? cheers!
Thanks, id did prefer 5000 rp, but is start to ged used to Iwata. But the main differences is the final look of the clear, spraying speed and the ethicknes of the clear on the part. Sata does the job fast, thicker layer and that means less dust to sand and polish but more harsh look, but this last paet depends on the clear. Different clears flows different.
Бро ты красишь так как на заводах именно с помощью LS 400 второй слой получается так нак надо. Меня многие ругали что я так делаю но благодаря такой методике мы получаем правильные цвета. 👍
If You are doing the job good, then why da fk someone are getting angry with that! Keep on the right way and be proud about that.
Это просто кайф бро. ❤
Thanks.
What guns would you suggest for Sealer Base and Clear?
For the sealer i use Sata 5500x 1.2 i gun. For base- depends on the basecoat. For spies hitec i use the same Sata 5500x 1.2 i while it is sugested from Spies to use it and i totaly agree with them. For Glasurit 100 line i use Iwata Ws400 series2 gun while again, it is the sugested gun from Glasurit technitions and i totaly agree with them. For solvent bases it doesnt matter in my opinnion what gun you use. The best you like. Its not so that i will sugest some gun and you will get perfect results with it. I started my career with Sata gun in year 2006. Then it was a Sata 2000 hvlp 1.3 i think. It was good then and is good now. If you are concerned about that you can't get some silver finish good looking, just practice and try other techiques.
Hi good job my friend . I have my bodyshop in the caribbean, aruba
Nice. When i will make enaugh money, i will ask my wife to go to carribean to wacation. So i can spend all the time in your shop to get my money back🤣🤣
Why dont you use refinity ?
You will not believe. I newer heard about that before. Just called my Glasurit dealer, same thing. They newer payed attention to that. 🙈