Видео

Ok, il try to make a vid where i explain why and when i use them

@auto_premium_latvia thank you looking forward for that vid

That's a P500

Thanks 👍

That is a 1.2 i non digital version

For the sealer i use Sata 5500x 1.2 i gun. For base- depends on the basecoat. For spies hitec i use the same Sata 5500x 1.2 i while it is sugested from Spies to use it and i totaly agree with them. For Glasurit 100 line i use Iwata Ws400 series2 gun while again, it is the sugested gun from Glasurit technitions and i totaly agree with them. For solvent bases it doesnt matter in my opinnion what gun you use. The best you like. Its not so that i will sugest some gun and you will get perfect results with it. I started my career with Sata gun in year 2006. Then it was a Sata 2000 hvlp 1.3 i think. It was good then and is good now. If you are concerned about that you can't get some silver finish good looking, just practice and try other techiques.

Thanks

​@@auto_premium_latviabro I'm putty workar ❤

Yeah, that is a problem for all new cars now. The sharp edges are fkt up wery fast

Nope. The mid coat is prety transparent juice, so it self is almost like at blender

To get the correct color. This is one of the way to do it in this color system

I spray it from 1.5-2.0 bar.

Hey. In my country it is not a wery profitable job i you want to go big but you are not a dealer shop. The bigest price for insurance repair what i can get at this point is 28 euro net for the labor hour. The rules are- you want to work, then this is what you can hawe. The dealer shops price starts from about 54 euro net. But only for the cars that stil hawe the factory guaranty on it.

Thanks, i was looking for a oportunity for a long time to do it😃 Think i did it not the best way but the end result was wery good.

Please?

Hey, im sorry for atotally crazy big delay to answer youre question. For clearcoat i use now Iwata ws400 clearcoat gun. With before that i used Sata5000 RP 1.3 gun. Later i replaced 1.3 nozle to 1.4 So i got a lot faster gun. It all depends on the clearcoat you use and cars you hawe to paint. While different car manufacturers hawe different clearcoat finish look. In my opinion Sata makes the finish more rougther, but how i said, different clearcoats makes different finish look while tehy flow different. Iwata makes all clearcoats more or less flatter with nice smooth texture. But find youre stile. Practice on old panels. Remenber not to owerdoo with clearcoat. I know for shure, i can doo a nice finish with ewery gun, it doesnt matter. With the first few centimeters i can understand of spraying i can understand what she does and adjust my moves to it so the finish looks nice.

Yes, it is it with plastic additive.

You welcome. The gun is good. I made all sprayjobs nice with it.

​@@auto_premium_latvia where you from mate the Ukraine 🇺🇦 did you see the boxing match the other week its was brilliant usyk vrs tyson fury 👏 😊

@@ANDY-we7mr Hey, im not from Ukraine, im from Latvia.

How is the 100 line, do you like it better than Spies? Which company has nicer clearcoat? Thanks from 🇨🇦

​@@auto_premium_latvia HI MATE WOULD YOU SAY ITS GOOD AS THE SAGOLA EXTREME AQUA 4600 1.3 AND THE IWATA SATAJET X 55OO 😊 AND DEVIBLISS PRO LITE 1.3 😉

Think Iwata dosn't hawe specifications like this. Sata has RP and HVLP guns

@@auto_premium_latvia the glasurit technician says that the iwata hvlp is not approved for the 100 line🤷‍♂️

There is no iwata hvlp, but sata hvlp. And the glasurit technition says that iwata ws400 series 2 basecoat gun is a perfect gun for it. Also other iwata guns are good for glasurit 100 line because of its specific way how iwatas spray the material.

From the first start i had Glasurit 90 line for a loooong time. Then it lost the quality wery fast and in 2023 i dumped 90 line, i got Sikkens autovawe and Spies Hitec. Sikkens was a pain in the ass while i hawe noy a specific brand of cars, but all what is on the roads. Sikkens required a lot of tinting and the scaner made the colors far away from reality. Then the technition from poland arrived at my shop to find out what is the problem. He told me at the begining, that i need to go to Poland to sikkens learn center and learn the tinting for sikkens. Im to old for this crap and i dont wana spend time for the useles spended hours to tint ewery car. Of course with time i would hawe a ton of tinted color to chose from, but no. I dumped the sikkens autowave and got glasurit 100 line. Meanwhile i worked with spies. Spies is a great system, but the light shades are pain in the ass again to get them smooth without any clouds. So the glasutit solved the problems with light shade cloudines. I work with both systems. Since spies is bad a t drying, especialy in rainy days, i prefer to use glasurit, but i can't work with only one system, while if i can't make the color in one system, then i can do it in the other one

@@auto_premium_latvia thanks for Sharing your Experince with both paintsystems.

Thats just a small part of that all. Can talk for a week about that all😄

If i remeber right, i mixed 0.85 liter RFU of clearcoat

Baslac un Spies

Thanks, id did prefer 5000 rp, but is start to ged used to Iwata. But the main differences is the final look of the clear, spraying speed and the ethicknes of the clear on the part. Sata does the job fast, thicker layer and that means less dust to sand and polish but more harsh look, but this last paet depends on the clear. Different clears flows different.

And now all your friends drive some sort of red cars 😂.

I fixed the cup. Used 4.5 mil drill, slided it in the hole and pushed against the bendet place and its round again. Works fine again

@@auto_premium_latvia So cash stay in the pocket :D

Yep😃

Thanks!

Thanks. Enjoy your spraygun.