I Turned Bus Junk Into Cash to Support my Junk Bus
HTML-код
- Опубликовано: 24 авг 2024
- The plaques are sold out already?! You all are wonderful!
Patreon: / agingwheels
Main Channel: / agingwheels
Tools and Things:
Ortur Laser: amzn.to/3ODf57C
Omtech Laser: amzn.to/3xVHlvb
Diamond Drag bit: amzn.to/3NnVFT6
Tempera Paint: amzn.to/3OoVDvm
Stepcraft CNC: www.stepcraft....
Glass Cutting Tile Saw Blade: amzn.to/39YYtIC Хобби
_I decided to make glass memorabilia from the windows of junk bus to support junk bus, but in the process I spent the equivalent of a small car to make it happen._
Never change, Rob
Yes, but who the F cares. :)
the lasers. were free.
@@DieselRamcharger @7:45
@@DieselRamcharger 7:45 my guy, the CO2 laser was not free.
@@Squiddles_ Assuming his spoken words are the truth. You believe what you want, i believe what i want. Ahh. Freedom. sssSSSSNNNNIIIIFFFFFFF. Can you smell it?
Got mine! Onya Robbo!
I wonder how much that cost to ship to Australia
I was about to say “wasn’t expecting to see dankpods here” but also where else would I expect to see you?
This video specifically taught me that DankPods is a top-tier patron of Aging Wheels. Three channels I watch separately and they're all related in one way or another. The third being Technology Connections.
This delights me.
same here really EPIC
What is this, a cross-over episode??
I completely agree, and throw HubNut, and Mighty Car Mods in there too
@@joelcarterramadge183 +1 for hub nut!
Aging wheels is also one of Dank's patrons, I caught it on the name roll at the end of today's video!
As a glass guy of 30 plus years, I am both extremely impressed with your annealing process, and horrified how much you complicated cutting it up LOL. Great video man!!
Agree 100% with this.
What’s a simpler way to do the cutting?
@@enriquegarciacota3914 One example, line them up against a fence of some sort that is precise enough for the purpose, like his table saw fence... Take a ruler, a long one, or even a ground alu/steel stock and lay it across, make sure its parallel, take a scoring tool, take a brush with some oil, clamp down the ruler, oil down the line of it and score as you would normally. That will give you in his case, i would guess at least 4 window panes scored up in no time, done well and precise and after that, he would just need to bring the glass to the edge of the cast iron table of the saw and having it clamped accordingly, just break off the pieces... All cuts woulda been nice, much faster and less tormentous to him... The sanding would also have been reduced greatly thereby...
@@enriquegarciacota3914 Use a glass cutter.......
Exactly.... i also worked in a glass place for a long time. a handheld glass scoring wheel or anything with a carbide glass scoring wheel to score it will do the trick if its annealed.. i was like WTF? No this is not needed!! Why?? LOLL
2:38 Dank Pods and Aging Wheels? This channel's collaborations get more and more awesome!
DankPods has been a long time supporter of Aging Wheels. I noticed his name on a patreon list on a video one time a while ago, and keep looking out for it.
Dank Pods is AhMazing
Dank and Frank have some interesting interests.
The nugget enthusiasts
They consistently refer to each other.
For example, in wade's 1mil origin story type video when he's showing off the nuggets, he put in text that "aging wheels is the nuggetering king"
When rob made a vpn ad skit and was doing the pretending to be australian thing and yelling stereotypes at his computer, one of the things he said was "LOCAL CELEBRITY DANKPODS"
I always love the enthusiasm and dedication that you pour into even the most minor of side projects. Thanks for bringing the joy to all of us. 😁👍
I love seeing other great youtubers on my favorite youtuber's comments!
@@franky4000 my only question is why is deviant not verified
DeviantOllam, DankPods, AND Aging Wheels? That's the RUclips collaboration I never knew I needed.
i love the ammount of snark in his content
Didnt expect such an awesome dude here. You make good stuff and the lessons ive learned from you have helped me help a lot of people in my life.
"I'm making these things to make money! Also, I bought all this new equipment!"
I don't know about the glass saw but I imagine he will get huge use out of the co2 laser.
same thoughts here :)
Love how the whole point of doing this was to finance the bus project, but it seems like it just ended up justifying a ton of other expensive tools lol
But like, as If I would do it any differently.
A magnificent lesson in tax write-offs.
I just did some ballpark math, and ... the income from the sales should easily be more than the cost of the tools. Like three times as much. So he's got a cool new laser engraver plus a couple of other useful things and also some money to buy stuff for the bus.
I'm rooting for you, Robert. If this works, this business model can easily be expanded. "Buy memorabilia from the questionable projects that were funded by other memorabilia sales!"
@@spyone4828 surely the laser can do more than engraving
@@pegasBaO23 indeed it can we had this exact same unit in my UK highschool and it cuts also by litrally changing the colour of the outline in the program it's that simple .It can also be used on woods, plastics and compesites for cutting purposes. and can laser engrave almost anything this tool is a game changer if he uses it to its fullest.
Those tools ARE probably the financing of the bus
Dankpods is an aging wheels fan...
its meant to be.
I lost it with “African Mahogany”. Pure gold, sir.
Imagine my surprise when the intro showed the bus and then the Under Dunn logo appeared. This is a really cool project - you have a habit of starting small side projects that turn into months long endeavors.
Rob, in LightBurn alter the fill setting to "Fill groups together" and change your line interval to 0.15mm. This will drastically speed up the process without a noticeable degradation in output quality. I use my Co2 for all sorts of things. I find it especially useful for marking out hole centres in wood and metal. Give the metal a light coat of paint then laser it or stick a piece of paper on it.
Rob's motto should be "being lazy, the hard way". Keep it up!
I hope Dank will be more careful than usual when opening that package.
Wait....DankPods is one of your Patreons?!
Damn i love both of you. Now i really hope there'll be a collab between you one day.
We got an Omtech at our shop a few months ago. I'd absolutely recommend that AC Infinity inline fan they have an accessory. The built in fan honks, the inline can practically inflate a bouncy castle. Helps a ton keeping the mirrors clean
it totally vaporized it like a lazer gun hitting you in a movie🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Spend $30,000 to make $10,000 of souvenirs 😆😆😆 that’s why we love Rob 😁👍
You are one of the only RUclips channels where I watch the video start to finish without any skipping. You have a knack for making videos very entertaining. Well done, sir.
Dankpods being a big fan makes a lot of sense
Kid you not Rob, I thought to myself this morning: "I hope I get an aging wheels or under dunn today". It's just good for my mood.
You didn't start a fundraiser...you started a legit trophy shop!
MAXIMUM EFFORT. THAT SHOULD BE THE SLOGAN FOR THIS CHANNEL. I LOVE HOW YOU GO COMPLETELY OVERBOARD. GOD DAMN THIS WEED IS GOOD.
I love how Dankpods gets the inaugural first Laser Etched Pane.
2 of my all time favorite creators, Under Dunn and DankPods. Life is good.
Love the dankpods reference you and dank are my favourite channels for nuggets
The logic of this is hilarious and sounds like something I would do. Decided to sell pieces of the bus to fund the bus project, but ends up spending literal thousands and months doing it. It’s awesome though, and I think all of us who watch the channel appreciate it.
Wait a minute... Dank pods logo? Ok your channels are definitely my favourite ones in the whole of RUclips
The most authentic guy on YT DIY! Would totally look a video where you clean and grease a bearing because you would make the process funny and interesting. Cheers!
Have you ever heard the saying “if he had a brain he’d take it out and play with it”? This is you my friend.
Keep up the good work. Love both channels.
The DankPods Cinematic Universe is expanding! Heck yeah!
It's remarkable how much of a difference there is between the stuff Rob makes for himself (where quality only matters if it makes the result harder to maintain or butt-ugly) and the stuff Rob makes for other people (where he puts in _way_ more effort to make sure it's good in every way possible).
Slartibartfast wanted an amazing art piece to go next to his awards for his amazing fjord work, awesome!!
The stream-of-consciousness course changes in this episode was a wild ride. 😁
I have untreated ADHD and this is my every waking moment it's kind of a nightmare.
It was kinda forseeable that dankpods is a fan of the things you make. i chuckled.
This has to be one of the most expensive and time-consuming fundraising projects I've seen to date.
I love it.
You are slightly insane but fun. This is something I would never have considered doing. The idea would never have popped into my head. I guess that is what makes you uniquely you. Definitely creative. Keep it up.
the laser cutter video was how i found this channel and it's weird seeing it again after having binged practically every video on this channel and aging wheels
That kiln must have had your electric meter spinning like a meat slicer 😂. I like your reference to The Hitchhikers Guide to The Galaxy 👍🏻👍🏻
Instant buy!
As soon as you kept noting "diode laser" every time you said it, I knew you were getting a proper laser engraver :)
Can't wait to see what all you do with it!
I'll take the "illegitimate" diode laser off his hands. 90% of the tools in my shop are taken from somebody else's trash because they couldn't be bothered to tune it or fix it.
Wow, DankPods is a patreon? That's amazingly awesome two of my favorite channels
Makes sense though you both love nuggets of cars
I also really enjoy the complete turnaround from a while back. "Why are these companies trying to send me lasers"
"I use it so much I bought the big bad one"
" i tried making money for this project but to make that money i had to spend far more money do i would have been better off just tossing the glass"
Very enjoyable content !
I absolutely love how different each piece is!!
I think the trick to score-cutting goes is that you have to do the break immediately after the score. Glass is actually a liquid and the score begins to 'heal' after its done.
8:46 good to see the man who designed earth is getting a plaque too
He deserves it after doing the little fiddly bits around Norway.
How did i miss this guy all along whilst watching TC and Dankpods?
Mine looks amazing, thanks for offering them!
That little shriek and laugh as you took the hammer to the tempered glass was hilarious. I must have rewatched that same few seconds nearly a dozen times and it made me laugh every time. I absolutely love how much fun you have with your projects.
"I made a rather large purchase" - I think we all felt the same excitement when those words were said
I love that these little glass pieces are meant to support the bus project but you end up needing a significant amount of tools to the point where i wouldn't be surprised if the project only barely pays for itself but that's a minor detail.
These funny little twists and a feeling of learning with you combined with your editing brings a lot of enjoyment and entertainment to watch.
I don't know how many of those little plaques he made, but I can guess based on how long he said the diode engraver would take to do them all. I don't know how much the laser engraver he bought cost, but I did get the price of one that looks similar off the company's website.
While the tools ate a significant chunk of the income, he should still profit more than he spent. (As in, less than half of the income to cover the tools.)
Order one and it came yesterday and I love it. I am so happy to support you and your amazing projects. For most people on RUclips I dislike their ad reads but you make yours so enjoyable to watch. I can't wait to see what you do next on either channel.
You can also use the new laser cutter for making gaskets, not sure how well it does exhaust gasket material, but paper ones are NO problem.
I got my piece of glass and it looks even better irl, so happy with it
Only $40 plus shipping? 😳 I was thinking much much more. You need to recover all the bus cash needed and the machines you got!
Nice tight edit on this one, gives a good glimpse upon the work involved in the project without turning it into a documentary.
Wasn’t expecting to see the name DankPods in this video, their channel is certainly worth a look.
The 10:05 moment gave me shivers, your seeve was so close to the blade!
Sold out! Sad for me, awesome for you. Congrats! 👍🏽
I'll refrain from making any cutting remarks...
Awesome job, Rob! 🙂👍
Dank Pods watches Aging Wheels.
Of f*cking course he does, AW's nuggets are probably right up his alley.
Was not expecting DankPods at 9:22
These look so cool, maybe you could do something like this with little pieces of the buses side panels?
Well he already has a CNC, so how about cutting the side panels into a few complex shapes that fold into a miniature bus?
The thinking overnight, and changing temperament joke was S TIER
Robert, you sir, are fantastic. Such a simple gesture for your patrons, with a profound meaning. Love your channels and your editing. Your humor has me in stitches every time. Great work.
"Like a big boy" had me laughing but i can relate.
Slow as they were, those diode laser glass etches were really impressive! I’ve been trying to decide between a diode laser and a K40 CO2, with glass etching being a key advantage for the co2, but this trick is good to know if I get the diode. Also, Ortur have just come out with a more powerful diode which seems like a decent upgrade, so hopefully that will allow it to go a bit faster.
I'd've suggested using your router table for the wooden blocks. It would have taken longer in machine time, but that's time you can be off doing something else if you've already verified it's operation
Love the amount of effort you put into everything, especially something for the fans. Man is dedicated and has been since day 1, keep doing what you do Robert! We're always right behind you.
We need a DankPods x Aging Wheels colab! When are you going for a trip to Australia?
You can use that glass in your new chicken scoop, that way the chickens have the feeling they are on the road in a bus :-)
Awesome video, I can't believe how much great content you make. Thanks. While in strips cut the slots and add chamfer along two long ends and sand before cutting into blocks.
If you spray the surface of the glass with some sort of oil (WD40, silicone, etc.) it will make your score lines better and it won't chip out.
13:05 sneaky EMD SD38-AC hiding in the background
that project escalated quickly... love it!
Watching you go from the bench engraver to the floor engraver reminds me of when my family upgraded the dot matrix printer to a laserjet. I'm still convinced printers are based on ancient magic, hence why ink costs more than blood.
"I don't have to paint the glass!" [Scrolls back to watch painting of a lot of glass.] Questions abound.
11:16 when someone replies "YEAH" like this, run away from the pain
SLARTIBARTFAST REFERENCE UNDERSTOOD!
Glorious!
Mine just arrived! I’m so happy!
Dankpods mentioned!! Garbage time is my favorite time!
Sad I didn't see this earlier but happy to watch you make them!!
Completely sold out. Outstanding.
I'm sure it's been mentioned in all kinds of creative and humorous ways already. But let's just say this reminds me of every single "Earn extra money project" I have ever attempted or investigated. The look on my face always resembles Forrest Gumps when he catches those 2 lonely shrimp.
Alright, that's amazing. I saw for the first time your name in Dank's Patreon roll just earlier today, and then in your video the placard you hold up from your first run is for him. I love when my favorite RUclipsrs from almost entirely unrelated content follow each other
I love Dankpods I’m glad to see he supports the channel
So excited I got my peesadabus in the mail today! it looks great!
Didn't know dankpods was your patron, two of my favorite youtubers together!
2:38 UOOOH MATE NUGGETMAN AND YUGOMAN COLLABORATION LESSGOMATE
You need to vectorize what you’re engraving. This way, it wont engrave point by point by in a continued line. What takes you 1 hour to engrave might take you around 3-4 minutes if the drawing is vectorized. But anyway, you solved the issue (kind of a overkill) by purchasing an amazing (envious af) co2 cutter. Cheers
It’s endlessly amusing how many of the RUclips channels I watch, follow each other.
Got my Esty order in. My son Adam loves buses. More than happy to support the channel and also get my kid a unique gift!
Already got it! Nabbed a corner piece.
"...up to 900 degrees..."
Ah, so he's just putting them outside in the sun.
Nah hes just throwing them like boomerangs up into orbit
This is really cool I would have actually bought one but I am late and they are already sold out which is awesome for you that they went so quickly
so just to do the Bus funding there was purchase of 3 separate tools,
i am starting to get feeling that the plaques are going to barely make any money because it will all get put towards the new tools.
DankPods? the Frank and Dank adventures of Ausie drummer and his snake GF Dank?
nice, (power on, Bluetooth mode, Auxilary mode) *scarlet fire plays*.
Wow! Fast shipping! Got mine already!
I love that even the people who watch you are cool. I see so many here in the comments and I'm a huge fan of Dankpods too.
Lightburn can import data from CSV so you can make all the plaques personalised.
Yes, great video! Thanks for sharing! Keep it up!
I love how you just HAVE a Kiln.. 🤣🤣🤣
The best way to clean up broken glass edges i've seen, is to not clean them up at all. you can run a piece of tape along the score edge if you want, but any frame is going to hide the edge anyway, so cleaning it up is pointless. its kind of funny to take apart a really high quality framed painting and see the edge of the glass looking terrible lol. all the professional glass cutters i know that do matting and framing just cut with a straight edge and a wheel and then break their glass with either the tiny hammer or grabbing the edge with the grabby side of the wheel cutter
I'm so sad I missed out on this!! I would have absolutely purchased one! Love all your projects, and big props to you for making all of these!
Dankpods x Aging Wheels would be a great collab, you fix Dankpod's tradie van