That shit is stupid, I remember what it used to take to get there back in the day .... I still have one on my bench ready. I'd be lying like a mf if I said I could ride ANYWHERE near like Chris.
Thumbs up to you Chris ...you're not only awesome at racing but what's better is that you always responds to your messages despite your busy schedule...unlike other professionals I know ✌✌✌✌ tnx for the tips and tricks 🇬🇩🇬🇩
Hey Chris thanks for making the trip up to the 1/4 mile track for fans, that bike is a beast can't wait to see that on that bottle of adrenaline, good work to you and the crew, Gixxer for life 💪😆
Great pass`s...Amzing that the clutch holds that power without much slippage on the top.I always ran lockup`s but not so much for keeping the clutch from slipping on top, but I used them to help on leaving the line. On a 6 spring clutch sometimes I`d only use 3,and could just let the lever fly. Talk about shims,I had a plastic box with a crap load of different thickness shims.. Great job on the setup..Sounded great from start to finish...
Great video Chris, I wasn't surprised at the number that I called awhile back, (8.23) with your on point explanations of weight to power ratios it was easy.
Just subscribed to your channel. I really enjoy your videos and I feel you do a terrific job during these days that everyone does the same stuff on RUclips. Keep up the good work and stay safe!!!
GREAT video and awesome passes! Thanks for sharing what it takes to get these times out of these bikes, so fun and interesting to watch and ride along you.
About those thumb downs I remember a wise man once told me "every man likes something different. It only means something to him anyways ". 😂🤣😂😂 That bike is going super sonic speed bro. Great video...
Great show 👍 but the bad news is the Honda 1000RR R is on the way . We're getting ready to run a 04 Honda 1000RR turbo with Stotz 🏁 parts Red Riders commig !
Absolutely incredible man!! Whats the wheelbase on the 1000? I have a gen 2 14 with the thickest brocks shims in the clutch. Only been racing a year and 60" are usually 1.35-1.38 I weigh 225 suited. Think I should try smaller shims? Wish I lived clower to you guys. Amazing skills man!
Another great video. The dash you have on your 2020 GSXR 1000 do they make that dash for my K7 1000 is it plug and play and what does it cost and the maker. Thanks again for the great video's and your time
New to the channel! What "go fast" mods are done to the GSXR? full exhaust, air filter, MR12, tune, ceramic bearings, wheels, sprocket/chain Is that it?
Like I told you on Instagram my brother I am very empress no nitrous all motor more Mafia tune beautiful thing you guys do a great job keep up the good work
I like your style and approach on tuning particularly on the '14's and even just Kawi's in general. Now I know why Brock is a fan! What is your turnaround time on ECU's like at the moment? I am ordering a penta carbon and several other new parts and want a new tune. I am already putting down like 212 +/- hp at the wheel.
BEASTMODE! That thing is an animal and so are you! Btw how much do you weigh on average? Another thing people probably dont take into consideration since your not overweight is how tall you are, that bike is pulling much more then the average drag jockey. So happy to finally see that thing in the quarter 😁😍
That's about what I figured, I found it funny that someone had in the comments on the last video 7.8. I'm thinking wow is he on crack or just really believe so blindly that Suzuki & Chris could make a number like that🤔. Well I'm still down wit u even tho I'm waiting 4 you 2 post a number from the Kawasaki ZX10 on the 1/4 mile track. Still want you 2 put a swinging on the 14 just 2 research & development 💪🏿✌🏾
@@raceaddict3212 I mean let's set it up exactly the same, I'm pretty sure it will perform close 2 the Zuke. I just like 2 see different things other than Zuke numbers & performance. Nutting against the Zuke or the Zuke faithful. I really enjoyed seeing the Yamaha R1 getting tuned, they used 2 be really hard charging bikes. I've seen them take down busa's in short runs(like 1/8 mile). I mean in other forms of racing Honda & BMW'S are hard runners. Hell Jeremy Teasley dropped a 8.4 on a BMW a few yrs ago that was a stock motor.
I'm not sure about Chris's weight, but I was surprised to see the same mph, or less than GIXXZILLA in the 1/4 being 0.6 seconds faster. This is moving out for sure for a stock bike with bolt-ons.
I run mid 9s on a 07 gsxr 1000. Stock other than the stretch. Stock gear, no commander etc. Mild stretch at that. Street slicks in 70 degree weather. You might not can run 8s on that bike, but I bet I could.
R model has upgraded front forks for the cornering riders, factory quick shifter, turn signals built in above the ram air ducts some color changes between the 2. The motor and everything power wise is the same. I think there is an X model also? im not sure I have a 2018
Very impressive. Almost make me want to throw a swingarm on mine but then I remember I weigh almost double your weight and it wont be as impressive LMAO
TWO THUMBS DOWN.... WHO DOES THIS???
Moore Mafia I’ll give you two thumps UP
Its on 3 now
Kawi bois found their way to the GSXR build videos 😂😂
Ninjas
The ones that going be seeing the brake light 💪😆😁
Mind blowing how fast these new bikes are out the box with simple bolt ons, just insane!! Awesome riding man, can’t wait for the spray 💨
That shit is stupid, I remember what it used to take to get there back in the day ....
I still have one on my bench ready.
I'd be lying like a mf if I said I could ride ANYWHERE near like Chris.
Of course as it should be dumbass. Even a fucking SUV now a days are fast why csnt motorcycles too?
FASTHAYABUSA 1340 calm down lol
You should be proud of the advertisement. I've only been watching you for a couple of weeks now and from what ive seen, you've earned your pride.
Gixxer thou- undisputed king of the sportsbikes
I just watched a 14 minute video on a bike I don't own for a hobby I don't have. Nice work.
Exactly what I figured. I had it at a 8.20- 8.30. u and that bike is flying my friend
000037 miles on the odo. I love it!!!
I'm amazed that they were dragging on 37 miles 😳
Im guessing they broke In the engine by heating it up and lettting it cool for a day or two ?
Thumbs up to you Chris ...you're not only awesome at racing but what's better is that you always responds to your messages despite your busy schedule...unlike other professionals I know ✌✌✌✌ tnx for the tips and tricks 🇬🇩🇬🇩
Thank you
Hey Chris thanks for making the trip up to the 1/4 mile track for fans, that bike is a beast can't wait to see that on that bottle of adrenaline, good work to you and the crew, Gixxer for life 💪😆
Great pass`s...Amzing that the clutch holds that power without much slippage on the top.I always ran lockup`s but not so much for keeping the clutch from slipping on top, but I used them to help on leaving the line. On a 6 spring clutch sometimes I`d only use 3,and could just let the lever fly. Talk about shims,I had a plastic box with a crap load of different thickness shims.. Great job on the setup..Sounded great from start to finish...
How consistent was the 60 doing this?
Crazy how much the temp gauge on the 1000 fluctuates from start to end. Great channel man!!!
No douth about it this guy can really get the best from any machine he gets on👌👌
So incredibly fast. Well done Moore Mafia, you lead and we will follow.
Great video Chris, I wasn't surprised at the number that I called awhile back, (8.23) with your on point explanations of weight to power ratios it was easy.
Need to look on EGR u tube page 2019 zx10 just did 8.77 at 164mph . With stock motor and stock swing arm .
WOW. That zx14 is a rocket. It sounds incredible too.
Just came across your channel good to see this on the track not the street!
WHATTTTTT O K K KAYYYYY. Lmfao.
You're the man Chris, very impressive times. Looking real forward to the nitrous install/runs. Love from Michigan!!
Gawd Dayum that last POV run was the shit😲 As a k6 gsxr 1k owner, I am so glad that I stumbled onto your channel!
Chris how are you so darn fast on the light! Incredible man.
Just subscribed to your channel. I really enjoy your videos and I feel you do a terrific job during these days that everyone does the same stuff on RUclips. Keep up the good work and stay safe!!!
Hell I ran 177 on Gordon Hwy. In Augusta GA on a stock 2007 gsxr600 in the 1/4 mile
You should put your name on that big white billboard on the stands 🤘🏾🤘🏾🤘🏾🤞🏽🤞🏽
You ain’t fastest until you race Ricky and his call out!
GREAT video and awesome passes! Thanks for sharing what it takes to get these times out of these bikes, so fun and interesting to watch and ride along you.
Probably the road race guys that hate when you stretch a bike lol. That thing is flyin!!
About those thumb downs I remember a wise man once told me "every man likes something different. It only means something to him anyways ". 😂🤣😂😂 That bike is going super sonic speed bro. Great video...
Great show 👍 but the bad news is the Honda 1000RR R is on the way . We're getting ready to run a 04 Honda 1000RR turbo with Stotz 🏁 parts Red Riders commig !
i bet itll be hard to keep a clutch in it like the bmw!!
2020
Honda
1000RR R 81mm bore will make big HP ride red 🏁👍🏽
That's what I talking about Gixxer to the world, can't wait to see it bruh💪💪💪💪
That's so crazy fast for stock motor 😲 holy hell. You kill it mate
Chris when I get my next Gixxer, I’m bringing it to you Champ.
Suzuki makin a comeback!!
Are you running an air shifter on the gsxr?
Your the man.... everyone share and subscribe to this man's channel he is out here giving all the secrets and killing it.
WOW, very Impressive Chris BOOM !!! Whst quick shifter are you going with on the 14? Install video would be sweet.
Absolutely incredible man!! Whats the wheelbase on the 1000? I have a gen 2 14 with the thickest brocks shims in the clutch. Only been racing a year and 60" are usually 1.35-1.38 I weigh 225 suited. Think I should try smaller shims? Wish I lived clower to you guys. Amazing skills man!
Another great video. The dash you have on your 2020 GSXR 1000 do they make that dash for my K7 1000 is it plug and play and what does it cost and the maker. Thanks again for the great video's and your time
Obviously I'm a ZX14R fanboy but those times were good considering the front wheel was in the air most of the run.
Dammit boy 5.24... good job Chris!
Omg 😮 thanks Chris for the 1/4 mile i love broo 🇩🇴🇩🇴🇩🇴
New to the channel!
What "go fast" mods are done to the GSXR?
full exhaust, air filter, MR12, tune, ceramic bearings, wheels, sprocket/chain
Is that it?
Obviously, you just mean stock internals right? That is a fantastic time even with the wheelbase and everything. Mad props to 160. + :-)
Like I told you on Instagram my brother I am very empress no nitrous all motor more Mafia tune beautiful thing you guys do a great job keep up the good work
When is the turbo coming?
so hard break ins on new bikes are ok? cuz its hard to baby my s1000rr k67!
I like your style and approach on tuning particularly on the '14's and even just Kawi's in general. Now I know why Brock is a fan! What is your turnaround time on ECU's like at the moment? I am ordering a penta carbon and several other new parts and want a new tune. I am already putting down like 212 +/- hp at the wheel.
I ship them back out the same day i receive them.
How many hp?
Awesome bike bro for what it is! I prefer SWB for me though. Your bike build is something special!
Son! You got that thing flyin! Good shit man. PEACE!!!!!
Holy f-stick thats fast!!!!....More Mafia More Problems
Yooooo😱 I Was Parked Rite Next to You in the Black Yukon XL‼️ Woooowww I Thought that Was You‼️💪🏾💪🏾
Daaamn! I've spent upwards of $40,000 on a 2000 ZX-9R to hit the 8s in the 1/4 mile.
Insane launch and performance. Wonder why normal stock of the shelve bikes get the quarter mile done in 10+ 🤔
ive been wondering that aswell cause even the zx14 had better numbers than stock and it didnt have a extended swingarm
8.20's on a motor that's never been cracked... bitch is flyin!!!
bravo Chris
BEASTMODE! That thing is an animal and so are you! Btw how much do you weigh on average? Another thing people probably dont take into consideration since your not overweight is how tall you are, that bike is pulling much more then the average drag jockey. So happy to finally see that thing in the quarter 😁😍
165 suited
That's about what I figured, I found it funny that someone had in the comments on the last video 7.8. I'm thinking wow is he on crack or just really believe so blindly that Suzuki & Chris could make a number like that🤔. Well I'm still down wit u even tho I'm waiting 4 you 2 post a number from the Kawasaki ZX10 on the 1/4 mile track. Still want you 2 put a swinging on the 14 just 2 research & development 💪🏿✌🏾
Im thinking that zx10 should back half the gixxer and come around it for sure. And keep in mind that gixxer has carbon wheels and the zx10 doesent.
@@raceaddict3212 I mean let's set it up exactly the same, I'm pretty sure it will perform close 2 the Zuke. I just like 2 see different things other than Zuke numbers & performance. Nutting against the Zuke or the Zuke faithful. I really enjoyed seeing the Yamaha R1 getting tuned, they used 2 be really hard charging bikes. I've seen them take down busa's in short runs(like 1/8 mile). I mean in other forms of racing Honda & BMW'S are hard runners. Hell Jeremy Teasley dropped a 8.4 on a BMW a few yrs ago that was a stock motor.
Bike running good my boy
Decent pass on the '14 and awesome pass on the 1000. What shifter are you going to put on the ZX-14R?
HM shifter
How much faster would the 14 be if it had a swingarm like the 10 does? Or would it be about the same?
BAM !! Great job Chris 👍👍
I'm not sure about Chris's weight, but I was surprised to see the same mph, or less than GIXXZILLA in the 1/4 being 0.6 seconds faster.
This is moving out for sure for a stock bike with bolt-ons.
Stock wheelbase vs 74”
Exelant show man. Love your bike man.
Suzuki's preferred break in routine lol
Bike is bad ass but lets not forget the Moore Mafia rider mod sold separately 😉
You mean traction control, sold with bike, and air shifter sold separately.
@@mactheplumber3839 no i didnt mean that lol. Id love to see you run an 8 second quarter on any bike let alone a stock motor 1k
I run mid 9s on a 07 gsxr 1000. Stock other than the stretch. Stock gear, no commander etc. Mild stretch at that. Street slicks in 70 degree weather.
You might not can run 8s on that bike, but I bet I could.
@@mactheplumber3839 congratulations
Isnt cycledrag a vlog channel too? Or sum else?
Now I know the story behind someone who has a brand new model year for sale with a clean title with only a few hundred miles on it. Lol
Impressive machine...
Love the video i be twisting the throttle like im riding
Thanks for the content man, awesome job, beautiful bikes.
Impressive 😎 . What are you recording this footage with ? The audio is so clear
Go pro 7 and RODE mic
@@TeamMooreMafia thanks. I've got as RODE shotgun mic already for a regular video cam. Good quality kit 👌
What did you run on the ZX14R? I am mostly in the 14 because that's the class I am trying to get started in. Thank you for the videos
8.87 at 159mph. I posted the slip in the video.
Thats INSANE super nasty man!!!!!!!!!!
!!!!! SUZUKI OWNS !!!!!
Baddest man on 2 wheels 😈
Did you top out at 177 ??
good job sir!!
Nice runs! Are those stock wheels on the gixxr or aftermarket?
They're carbon BST wheels.
Great job bro
What's the difference between the 2020 gsxr 1000 and the gsxr 1000r.
Ty
I think its options. Better brakes etc but I could be wrong I've yet to even check out the 2020 models
R model has upgraded front forks for the cornering riders, factory quick shifter, turn signals built in above the ram air ducts some color changes between the 2. The motor and everything power wise is the same. I think there is an X model also? im not sure I have a 2018
@@djinnzukii671. Atta way to copy and paste off google 💪
@@djinnzukii671 🤣🤣🤣 awww don't get mad babygirl
@@djinnzukii671. 🤣🤣🤣 I'm clueless! Have I always been this dumb or did you just make it official? Take your goofy ass on somewhere
Congratulations!
So which bike your more comfortable with between the zx14r or the 2020 gsxr1000 and the zx10r. Even dough the 14 not stretched.
The 1k is easy to ride. There short 14 is a major challenge.
About the same as the rg2 H2......damnnnnnn Gina....
Wow thats crazy
I don't know what class she races in but Ashley Cotnior runs a 7.71 @ 169.something.
Thats just sick man, you guys at Moore Mafia rock! Was that with the bottle or all throttle?
No bottles, no snails. Just plain ol skills.
All muscle
and MR12 i'm sure
Tongue hanging out the little guy lmfao!!!
I la la la loveeee this Channel, I can't wait for the Nos :)
he struck it on that 1/4 mile and when i mean he struck it he hauled ass
Bro keep doing what your doing man exelent work man 💯💯
Love the knowledge bombs shimmmmmm
WOW What a result! WAAZZUUP More Mafia !!!
Awesome job man love the content
That's a bad man #chris Moore 💪💪💪💨💨
It’s not completely stock by having an extension on the swing arm ?? Is it ?? Thanks 🙏
The engine is untouched
If the stretch is removed, how fast do you think you would’ve put on the clock?
8.8s
Time to put the dope on it.
Seems like you do a long burn out.. does that tire like alot do heart or is that your routine
With 60' times like that it is needed.
I was more impressed with the fat 500lb 14r going 8.80's LOL
Hey chris what is the best way to talk to you about what i can do to a 09 geb 2 busa with out breaking the bank to make it a full blown race bike
8642445447
Open Tuesday- Saturday
What launch rpm on the ZX 14r
Very impressive. Almost make me want to throw a swingarm on mine but then I remember I weigh almost double your weight and it wont be as impressive LMAO
Same here! I'm not on a 1000 but swb is sketchy for me at the track.
My brother (Big Kountry) might ride it soon to show you what it will do. Here weighs 210 pounds.
@@TeamMooreMafia 👍love to see that.sir.