How To Replace Toyota Tundra Timing Belt 2002 V8 Disassemble Front of Engine PART 1 1AAuto.com
HTML-код
- Опубликовано: 7 сен 2024
- Buy Now!
New Timing Belt Kit with Water Pump from 1AAuto.com 1aau.to/ia/GAEE...
1A Auto shows you how to install, change or replace a cracked, snapped, cut or timing belt. Another common reason to change this is if your car has high mileage and is recommended to be changed by your vehicle manufacturer. This video is applicable to the Toyota Tundra, years 00, 01, 02, 03, 04, 05, 06, 07, 08, and 09.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ooq/1AX...
• Phillips Head Screwdriver 1aau.to/ooq/1AX...
• 10mm Wrench 1aau.to/odM/1AX...
• 11mm Wrench 1aau.to/odM/1AX...
• 12mm Wrench 1aau.to/odM/1AX...
• 13mm Wrench 1aau.to/odM/1AX...
• 14mm Wrench 1aau.to/odM/1AX...
• 15mm Wrench 1aau.to/odM/1AX...
• 16mm Wrench
• 17mm Wrench 1aau.to/odM/1AX...
• 18mm Wrench
• 19mm Wrench 1aau.to/odM/1AX...
• 21mm wrench
• 22mm Wrench
• 10mm Socket 1aau.to/ok6/1AX...
• 11mm Socket 1aau.to/ooi/1AX...
• 12mm Socket 1aau.to/ooi/1AX...
• 13mm Socket 1aau.to/ooi/1AX...
• 14mm Socket 1aau.to/ooi/1AX...
• 15mm Socket 1aau.to/ooi/1AX...
• 16mm Socket 1aau.to/ooi/1AX...
• 17mm Socket 1aau.to/ooi/1AX...
• 18mm Socket 1aau.to/of5/1AX...
• 19mm Socket 1aau.to/of5/1AX...
• 20mm Socket
• 21mm Socket 1aau.to/of5/1AX...
• 22mm Socket 1aau.to/oaK/1AX...
• Harmonic Balancer Holding Tool
• Harmonic Balancer Puller 1aau.to/of/1AEH...
• Slip-Joint Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oaT/1AX...
• Ratchet 1aau.to/opt/1AX...
• Socket Extensions 1aau.to/ooi/1AX...
• Torque Wrench 1aau.to/oip/1AX...
• Drain Pan 1aau.to/obv/1AX...
• Floor Jack 1aau.to/od6/1AX...
• Jack Stands 1aau.to/odN/1AX...
• Rubber Mallet 1aau.to/o5/1AXA...
Subscribe: / @1aauto
Check out our playlist:
Toyota Auto Repair Videos: • Toyota Auto Repair Videos
Toyota Tundra 2000-2006: • Toyota Tundra 2000-2006
For More Info visit us at 1aau.to/h/zq/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Do you have a timing belt kit for the V6 first gen Tundra? Or any videos on that engine?
Thank you for the video! I know it takes a lot of time to setup cameras, explain things, and edit the footage. I appreciate it!
Yeah, I'm gonna pay a shop for this one. Thanks for the great info. I'm ok with brakes and alternators and starters and stuff like that ...
This was exactly what I needed to see...Hello Toyota Dealer...I'd like to schedule my truck for a timing belt change.
Thank you so much for posting this very helpful video. I am in the process of doing this job right now on my 2003 Tundra 4.7L V8. There are few significant differences between my truck and the 2002 model in the video I wanted to point out. If you have a 2003 Tundra, it may save you some headaches. I'm really surprised at the differences.
First, the skid plate is different. No biggie. Easy to figure out.
Secondly, the AC compressor is way different. You do not have to remove the compressor in my truck. That's a good thing because I cannot loosen one of the compressor mounting bolts because a high pressure line is in the way and it ain't going anywhere. I only had to remove that lower front bracket to gain access to one of the fan bracket assembly bolts. There are two bolts not mentioned in this video necessary to remove the fan bracket. One is above the compressor and you'll have to remove the bracket holding the compressor wiring plug for access. The other is below the front of the compressor accessible after removing the lower front compressor reinforcement bracket (the one with the nut and the bolt). I learned this only after much fussing and searching online. My Tundra factory service manual didn't even get close to mentioning this.
And that's how I made my way through part one. Closed it up for now and I'll fire up the part 2 video in the morning.
Used this video to do the timing belt replacement on my Tundra 10 years ago. Just used it again to do the second replacement. Will use it again in 10 more years.
I'm newly retired and my 2002 Tundra is due for a timing belt replacement. I thought I might save myself some $$$ and do it myself. Your fantastic 3 part video just showed me that this is WAY more than I care to take on. Thank you!
me too, I've done timing belts before, but this more than i want to do, I will pay for
it to be done.
+John Rogers Thanks for the feedback!
If you don't have much experience with something like this, we normally don't recommend doing it on your own. The video is very helpful in getting the job done but doing one step wrong could result in serious damage to your engine.
And Know that I've tried everything I can't take it to a mechanic because they see that I already have been working on it.do u have any advice or something I'm doing wrong on why it won't start
Wanted to thank you for your video. I followed it to replace my timing belt and water pump on my 04 Tundra. It was a great tool. The hardest part of the job was getting the harmonic balancer bolt off and then torqued back on. Thanks again for your videos.
Nice work. We're glad the video helped you out. 1aauto.com 866-403-3393
Great instructional video!! Just completed successfully my timing belt kit replacement on a 2000 Toyota Tundra. Two notes. 1.You don't need to remove the a/c compressor, just the support bracket underneath and the small bracket with the Philips screw so you can get to the two bolts that are bolted into the fan bracket assembly. 2. I split two 2x4 "special tool" down the middle so I switched to a Trex (composite decking wood) 2x4 I had left over from a project and that did the trick as far as getting that stubborn crankshaft bolt loose and re-torqued. Again, great video...gave me the confidence I could do this project myself. Thanks!!!
+Trevor Allen Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/TimingBelts/Toyota/Tundra/GAEEK00022?RUclips&CTA+Comment&TZTn1Arjho
Thank you so much for your hard work on these videos. Every job I am confronted with or take on for family, I pray that you've documented it. Couldn't do it without you!
Thank you for watching! Glad to be of help. Let us know how the repair turns out. 1aauto.com 888-844-3393
These series of videos are awesome. Just got done with my 2004 Tundra SR5 and used the three parts to guide me every step. Don’t let the 45 min series fool you - this job takes a long time. Fantastic video and guidance. Thank you
+goofball1988 Thanks for the feedback!
Hi Mike. I'm glad to see you show a more complicated repair on this channel. Thanks.
Thank you so much for the 3 videos on the timing belt and water pump replacement! I was able to complete this project at home this weekend following the instructions step by step. Everything is running great!
I too wanted to Thank You for saving me over $700, your video made this easy. I used it to replace the timing belt & water pump on a 02 Sequoia 4.7. Like most people that go to do things like this you pay attention taking it apart but something does not fit right or even though you lay it out just so something gets moved or well you just can't figure out how this part goes on, so I went back to the video and there is the answer. The locale dealer wanted over $1000 to do the job, my parts cost under $300. The wife is very happy & even though the vehicle has over 250K mile on it, she has NO plans to get rid of it. She LOVES this vehicle.
+steve tichenor Thanks for watching. We carry the parts shown in this video on our website. Here's a link to them if any of our viewers needs to make this repair. www.1aauto.com/1A/TimingBelts/Toyota/Tundra/GAEEK00022?RUclips&CTA%20Comment&ATony
Thank you for the detailed series of videos addressing the replacement of the timing belt and the water pump. I followed them explicitly and the result was amazing. I would not hesitate to do this job again with the help of your excellent videos. Saved me many $$$. Definitely purchased all of my replacement parts from 1A Auto. Thanks again.
+William Berg Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
After 20 years go ahead and replace harmonic balancer. You will be glad you did.
THANK YOU SO MUCH for this video, it was such a big help. My husband and I did our water pump and timing belt by ourselves. Our 02 Sequoia had almost 200,000 miles on it and never did change the timing belt. We thought it was our water pump that was making a grinding noise but come to find out is was the fan bracket so we had to change that and a couple other pulleys now it runs good. Thank you once again!
+Natalie Kealoha Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Thank you so much. I replaced my fan pulley assembly by watching this video. Perfect step by step, no left over nut or bolts. Took all day but the labor was free and the gratification awesome.
This video was great. Absolutely saved me a ton of time and frustration. Very clear Walk through of every step. Thanks guys
I have been working on cars for decades and still found these 3 videos amazing. Detailed, accurate and easy to follow. Other than the tensioner (put an edit on it?) these directions are flawless.
Incredibly helpful video. Working on my 2001 sequoia timing belt right now, very similar guts to this tundra. Thank you!
Thanks for this! I bought your gates kit and following the instructions successfully completed a timing belt / water pump installation with little previous automotive experience. It might be helpful to add 'gasket sealant' to the required materials list, as well as providing dimensions or noting when you have the harmonic balancer off to make the installation tool (2x4). The AC compressor was the hardest part (on and off), but it's obvious why it was difficult to film! Thanks again!
Your videos saved me! On reassembly, I had an extra bolt with nut and wasn't sure where it went. Your excellent step by step instructions plainly illustrated it was one of the tensioner assembly bolts.I had mistakenly installed it in center timing belt cover. Now I can finish up my '09 4Runner 4.7. You ROCK!
The only thing worrying me now is that the new belt marks line up on L:eft Cam with the "T", Right Cam with the "T" , and the dot on the crank. When I line the dot up on the crank with the "CR" on the belt, the top white line of the pulley doesn't perfectly line up with the "|" mark on the crank cover. Oh well, hoping belt marks outweigh the cover mark. If it is off, it's only by one tooth. LOL!
What did this look like? Was the marking on the belt positioned to the left, or to the right of the line on the crank cover?
Did everything work out? Or did you need to do the job twice?
It really depends on the shops in your area. You may want to shop around between a few for pricing.
Thanks for providing such a detailed video on how to properly change the timing belt on the 4.7L tundra truck... I just completed mine and your video on ensuring proper timing belt alignment between the cam sprockets and the camshaft was really helpful since I managed to change the timing on my truck when I used the cam sprocket bolts to turn over the engine.. this resulted in timing belt misalignment.. However, your video which showed how to properly match the timing marks fixed all that.
Great video! MOST automotive instruction videos are awful...... with bad loud music, or improperly focused and directed cameras, poor lighting, the tech talking about things other than the subject at hand, doing the procedure incorrectly, or any combination of the above. This one is first rate. Thoroughly professional. Not only a pleasure to watch, but completely meets the video's objectives.
+Devon Stavrowsky Thank you for kind words! Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
our tundra is at 305k miles ,you dont have to worry about replacing it yet . its a solid built truck .
Thanks for watching. 1aauto.com 888-844-3393
Normally most vehicles have a transmission line going from the transmission to one of the plastic caps on the side of the radiator. Some trucks on the other hand come with a transmission cooler in front of the radiator. It is normally small, only about the size of a not pad and about as thick as on radiator core.
Thanks for checking us out. Have a great day. 1aauto.com 888-844-3393
Thanks for the honest reply. I will probably leave it to someone with some experience doing this job!
Thanks for the detailed video of how to DIY the timing belt and components. I plan on tackling this same project next month.
+Tony Begnaud Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393
Just want to say thank u just changed my belt in my 2003 tundra it went so smooth thanks to you and your video thank you again
How does people dislike a really good video... thank you for your video
Thanks for doing me a favor with this video guys.
Great video, Im about to do my first TB change at 150k. I will reference your video for sure.
Thank you for the great video! Your instructions were clear and helpful.
Thanks for watching. 1aauto.com
This is exactly what I need right now! Thanks for the video. Subscribed
Thanks for the great video..been putting this job off because the factory service manual isn't very clear, especially on the timing procedure., My Land cruiser is on its second belt but just hit 220K so it due again...
The clip slide near the grommet on left cam cover(driver side) that you skipped over is giving me a hell of a time.
Thank you for your awesome video that I find where the twelve milliliter bolt belongs to
You would need to take everything off to inspect it.
The power steering pump removal, did you have to remove 2 bolt next to each other behind the pump, i think they are to a mounting bracket??
Can this video also be applicable to first gen sequoias?
We already replaced the belt tensioner and also the puller for a new one. But still doing it. Now we are going to change the damper
Omg what a messy job to do! I hope it's easier on tiny cars
Great how to! Thank you so very much.
Right. ... OMG. What do I do with all the left over parts?
Thank you for this video, The next timeing belt I will be installing into my Tundra.
fantastic video...
Thank you for sharing your wisdom.
I just bought one used with 124k miles, is there any way to know if this was done? Can you some how peek in on the belt
Go on Toyota's official website and you can register your vehicle. Once you do you can see the service history provided it's been entered by the owner or repair shop. Not concrete info, but you may get lucky.
Thought I already typed this but not here? My truck is a 2001 Tundra with low milage about 40,000 miles but 12 years old. Do I need to replace my timing belt yet? Is this a job a DIYer can perform if I have moderate mechanical ability?
With those miles it should be fine.
cool waiting for pt 2
I followed this video and I lined up the timing belt and I bought the harmonic balancer.i got it all back together and it still won't start
Astounding! Thank you!
I'm having trouble getting the fan assembly off (What you're doing at 6:44 in the video). I've shook and wiggled it as hard as I could and it wouldn't budge. I then attempted to chisel in between the area where it mounts and that didn't help either. Any ideas? I'm wondering if loosening the tension in the drive belt first would make any difference?
Hello! Would this work for year 2000? :(
What if that fan is stuck on there pretty dang good after I’ve gotten the nuts loose?
Thank you
pretty good but it only took me 13 min.
awesome video series!
great job
Do you have to remove the ac compressor
I'm mechanically inclined but never done major engine work. Can't afford the $1500+ it is going to cost for timing belt for a while (been out of work), is this something I can do with help? This behemoth is going to require me to work on a step ladder! I've done a coolant flush, which is the first step, and fan belts, but never more in depth than that. I'm not scared though... just short on cash for a while and already at 130k miles.
What air impact ratchet did you use? It was not listed on the parts. Thanks!!
+T. Thor This repair calls for a 1/2 Inch Air Impact Gun. Thanks for the question.
I have a 2000 Tundra 5.7 V-8 with 212,000 that I just purchased used from a car lot. is there any way to inspect the belt accurately without total disassembly? Someone could have put one on 10K ago or it may have the stock one on... No way I can know?
Thanks for the video, but, it would help if you didn't keep the microphone inside your mouth when you are talking.
great video, is the 2004 Toyota Tundra the same?
+letsgosteelers68 It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
Le falto torquear a los tornillos y so ese video a medias no esplico como sacar las partes y ponerlas dejo a la gente toda confundida
Awesome Video.
Thanks
Thanks for watching. 1aauto.com 888-844-3393
can you please post a video of 2001 toyota rav4 water pomp
+Emmanuel Barajas Thank you for checking us out. We will forward this to our Studio in hopes of a video being produced in the near future! 1aauto.com
Yikes. This is why I only buy Honda's. Much more easier than this.
Will this work on 04 sequoia as well
+Rhett Munson This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
thank you,i have a 07 4.7v8 sitting in my bk yard bcuz i dont have 850$ minimum to get it done.still makin the payments.appreciate tuturials
+Erick Correa Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/TimingBelts/Toyota/Tundra/GAEEK00022?RUclips&CTA+Comment&TZTn1Arjho
This makes me not want to buy the truck i test drove today. Thats alot of work.
Nice vid!
+Shadofx Thanks for checking us out and the feedback! 1aau.to/m/Shop-1AAuto-c
excelent
Does the truck have protection if the belt breaks
+Dark angle Hello, there can be multiple issues and damages that can occur if you operate you vehicle while a part is not functioning correctly. We would not advise driving if you have a broken belt. Have a good day! 1aauto.com
These are interference engines meaning without proper timing valves and pistons would collide rendering the whole engine useless, the cost for new heads valves pistons etc. would not be worth the value of the car. So long story short spend a grand at the shop or a few hundred bucks if you do it yourself now or wait and get the car towed to the scrap yard when the belt breaks
same process for 07 sequoia?
We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. +Cibbum K
nice
Would this apply to the 2003 Toyota Sequoia as well?
+Jarrod Smith The process for the Sequoia should be similar, although there may be slight differences based on the overall vehicle design. We may confirm the parts are the same between these two models with the 4.7L engine. www.1aauto.com/timing-belt-kit-with-water-pump-gates-tckwp298/i/gaeek00022?f=481852&y=2003
Wondering if you thought a typical diy'er without much mechanical experience should try and attempt this job?
🇺🇸
Volkswagen timing jobs look easier then this.
Geez that’s a passer
looks like i wont be buying a toyota tundra, timing belts with interference motors are junk when it breaks no thanks!
+Richard M Thanks for the feedback!
Thanks, BUT, WOW this is a ridiculous design
+motokev Thanks for checking us out!