Thanks brother you need to be in the movie industry, you have a good voice for narrating. A smart pan man to say the least. So much knowledge. Thanks for the info.
Thank you! I know this is an older video but it is very informative. Have been using cast iron pans (skillets 😂) most of my life and was on a quest for an additional skillet. Have given too many of them to my sons - most of which were bought at yard sales and such. I never paid much mind to the brand - rather, I judge it on how slick the interior surface is and the weight. Since I am on a quest for an additional skillet I started watching RUclipss ! Thank you in my quest ❤. I am 70 years old and never knew any of this 😂❤ But I am just buying a Pan !
So helpful!! Thank you!! There’s so much to know and you have great information to help me figure things out. I’m interested in quality but not a collector so I appreciated learning about the wobble not really being a problem.
I've been collecting and using cast iron cookware for 45 years. I found this video to be a very informative and helpful video. You have done a super job of explaining the basics for the beginner just starting out. Bravo my friend. Im looking forward to watching more of your videos. I just found you today. Thanks for sharing.
I looked at my irons from my great grandmother. My pans get used everyday. They have never been cleaned and the outsides are gross. I have always been afraid to clean them. I am now excited to bring them back to their glory. I looked hard and they have markings. I also have 3 hammered irons. Thank you for all the time and information.
Thanks for your great tip to clean cast iron. I bought a couple of pretty badly rusted pieces. I saw your video and bought some oven cleaner, sprayed the pieces put them overnight into a double plastic bag then shoved into a clean garbage bag. Next morning took them out scrubbed a bit and then reseasoned them. They came out amazingly clean. Thank you your tips actually work.
I really enjoyed this video, finally I know what my iron skillet's are. They were handed down from my great grandma (6" Lodge from the twenty's) and my papa (10" Lodge from the fifty's). Thanks for sharing, I have saved all your videos so far. Great info
My late mother always loved cooking with her cast iron pans. Anyway, one day while cooking something on a small pan. I heard a loud snap. I looked over to see the pan on fire. She quickly put a lid on it, to extinguish the flames. The pan had cracked, and I guess the grease went threw the bottom, and ignited on our old electric range. My mother said, "In all my years, I've never seen that happen before". RIP Mom, Love You...
Thank you for teaching us about cast iron! I learned very much from watching these three videos. I had already restored and seasoned 3 pieces of old Griswald iron. I did not know all of your tricks however so now I want to redo my restoration! Great video!
Enjoyed your video! You've got some unusual pans I haven't seen anywhere else. That 3-legged cauldron is a treasure. I'm not a collector, just a dedicated user. I'm 68 years old and I've never used any other kind of skillet. I also have a Birmingham Stove and Range Dutch oven that I bought new back in the 60s. I got it real cheap because it has a casting defect in the lid. That lid also happens to fit my Griswold #8 skillet perfectly! I just restored all my pans with instructions I found on RUclips. Some came out wonderful, others not so great, cuz I was just learning and not all the advice on RUclips was the best. My mistakes: Seasoning with flaxseed oil - it tends to flake - Crisco is my go-to now. I also think I might have warped both my Griswolds :-( by putting them in my self-cleaning oven. But I hadn't learned about "spinners" yet, so they might have been warped before I did that. But they're still good cookers, like you said. I'm about to watch your restoration video. Thanks again! Welcome to my RUclips cast iron family!
Thanks very much. Instructive and entertaining at the same time. I live in South Africa and some years back I got a no. 8 Wagner chicken fryer for the equivalent of about $4.5 at an antique shop up the road in Darling. Today it is pretty much in daily use. It literally lives on the stove top. I found you because: Cast iron is hard to come by here, but I bought an iron skillet this holiday and am busy restoring it too. It is about the same size as the no. 8 Wagner, but so far as I can tell unmarked (lots of crud on the bottom). It also has a lid which fits well (Yippee), and has a good 'ting' noise on both. But it is almost certainly from a local forge as it has a wire handle over the top (to hang over a fire) and a wire handle on the lid (which was just forged with a large nipple with two holes to hold its wire). So it is an interesting oddity. I look forward to using it. It is in it's second dose of oven cleaner and might attempt the electrolysis method depending on how it comes out of the second treatment. Very much appreciated. Oh, and smelling salts for the cleaning video were not required, that is exactly how my Wagner is maintained, and it hasn't missed a step...
Everyone seems to be interested in the 4 most popular brands, but I honestly love finding the mystery skillets more. Weird hammer finishes, local smaller foundries, and occasionally a century old piece shows up.
Thank you for such a wonderful real life video. I love cooking with cast iron. I have several Lodge Logic pieces (pots, skillets, griddles) and I find them great to cook with even though I am not a fan of the texture. My great-grandmothers's WagnerWare 3c is my favorite, it was/is known as "the grilled cheese pan" for obvious reason. My second best skillet was passed down through my husband's family: a lovely number 8 that is old and smooth. It and a $2.00 yard sale number 5 Griswold are my most used skillets. I tell people that I will use my cast iron until it is too heavy for me. Now I am going to see if I can ID that number 8.
I like the structure of your video because you speak NOT as a collector but as a USER...not that collectors are bad videos...but they are partial, as I am not, to real use...spinners, pits, and defects...are not a concern for me unless it interferes with the actual cooking...lol. I'm a sub now...because I'm a Taiwan user as well and an Ozark Trails Lover...Got a video uploading in the morning on a Lodge Vintage #5 that needed a home but collectors passed it over because it had a belly button as I call it...lol.
I’m at my wits end with my cast iron skillet! I’m finding out there is a very legitimate reason people dread working with it. I have watched countless hours of instructional videos and I have paid very close attention. I’ve seasoned my iron skillet well and the first time I cooked bacon in it, it seared so badly I simply could not get it off the skillet. I have never seen meat get stuck to any pan like that bacon did on that day. I cleaned it very well and then I put it up and pouted for a few weeks. Then I decided to reconcile with the darn thing again. I sweet talked it, bought it flowers, put on some nice soothing music and everything. Then I went ahead and seasoned it 5 more times. The next time I cooked bacon in it, it cooked perfectly; however, upon drying it off I noticed thousands of little tiny black specks were transferring onto my towel. After cleaning it and drying it off the pan looked worse than when I bought it. The black specks keep shedding off and now the pan has lighter patches where it appears the seasoning has come off from the surface and now we’re not on speaking terms again. The BETRAYAL!! It’s a lodge and it has a very very rough surface. I don’t know whether I should strip it and start all over or if I should just keep seasoning it and hope the bare patches will disappear over time. I’m so discouraged. I just want us to get along and I want nothing more than to learn how to work with cast iron but they’re just so delicate and sensitive to any stress. I’m starting to think like the gardener with the green thumb has the magic touch and a very robust consistent harvest, there are some people that truly just have a way with cast iron. This darn iron skillet keeps challenging me to a fight and frankly I’m tired of having my backside handed to me by a 5 lbs frying pan! I don’t know if this shedding is to be expected with new skillets or if I might have scrubbed it too hard after this second round of bacon.
Enjoyed this video - especially the end part on lids. I like to find very old pots, spiders, and Dutch ovens but it is hard to find them with their original lids. I’d love to hear more of your insights regarding finding good lids for them. For example, I have a 11 inch spider and have not been able to find a good lid for it but I did find a round hanging griddle that fits it perfectly. I also use an old tin plate as a lid for one of my 3-legged pots. Best wishes.
Hi, I'm a new subscriber. I've been getting into antique cast iron. Last December, I bought a very clean 1930s era Favorite Piqua No.9. And then, I found a 1912 era slant Griswold No.9 with a heat ring! I'm enjoying your videos and always have a shot of nice bourbon when I watch! :) Keep up the great work, love your cook stove! I run a channel about antique tubular lanterns, if you care to stop by sometime, that sort of thing interests you. Your knowledge is vast and thank you for sharing! Respectfully, RayoRob-
It sure was about time I learned about what I've been cooking on for so long. I have my Mom's skillet,s & possibly some of her Moms. They're definitely my favorite pans to use. I just didn't know what I didn't know. Your collection is impressive & looks so great on your wall. I watched 3 of your videos & I've got to investigate what I have. Greatly appreciate you & T.Y. for yr inspiration. 😳
I realize this is an older video but the information is still solid. One thing I do to keep the coast down is offer to clean and season pans for businesses. If they have pieces that won't sell I offer to clean it for free then it sells quickly. They're hooked after that so I'll take cast iron or money for payment depending on what they want to do. It's nice to get a #11 Wagner Sidney O w/ outside heat ring just for cleaning a few pieces. Yesterday I made a $100 for cleaning which will be gone the next time my wife and I go junkin. The bottom line is you can have a nice collection without spending a fortune out of pocket.
Thank you for the great videos. You made it much simpler than the way I learned through You tube. I learned a lot about how to take care of my wifes grandmothers skillets.
Great video. Very informative and relevant. I saw your video on TheKneady Homesteader. I liked it so much I decided to check out your channel. I am glad I did. Thanks for sharing your knowledge and experience.
Great video. I overpaid for many of my cast iron pieces only because I bought through eBay. Lots of people were bidding for the items I ended up winning, so that drove up the cost, but the shipping is where I really took a hit. Simply put, the pans are heavy, and shipping costs are calculated by weight. On the other hand, the convenience of buying online versus going to estate sales, buying gas, time driving, etc. balances out the costs of shipping in my opinion. I use my cast iron cookware. I am not a collector. So, I do not have many pans of cash value. My most valuable pieces in terms of cash are a small logo Griswold #9 griddle, a Griswold popover pan, and a #9 Wagner Sydney O skillet. I do have quite a few Wagner pieces that are pre 1960, so I suppose they do have some cash value as well. I have a slightly wobbly #10 skillet, two #8 chicken fryers, a #5 skillet, and a post 1960 #9 griddle. The best value in my collection are two unmarked skillets, a #7 and a #8. I got together in one purchase from eBay for only $15. Although they may be have the oldest production date (I estimate 1920-1930) they are not "marquee" names like Griswold. One is from a Chicago foundry and a well made skillet with a smooth cooking surface like Griswold.
Great job - very informative. I watched all three in this series. You have a great demeanor for this - a natural teacher. You also sound just like Tom Bodett - one of my favorite voice actors, writers, and humorists.
That old 3 legged kettle from the 1840-1870s is amazing. EVen more amazing is the price you paid. Thanks to this video I found out that both skillets I recently cleaned and seasoned were my grandparents. One is a vintage lodge one notch (1930s-40s) number 8. The other is a small logo (I'm guessing) Griswold number 3. Still trying to date the number 3 griswold. This video is filled with great knowledge. Thanks!
Hi mate quick question about heat rings. I have an old wood stove should I just get pans with heat ring or both. Love your channel great videos. Cheers Terry-Australia
Lids can be a problem. I have two Wagner chicken fryers. A modern Lodge Dutch oven lid fits them perfect. I did find a glass Wagner lid on Ironman. Works out great when I’m frying a bunch of chicken. I have around 75 pcs of iron. Have never sold one. I use, and have given many away to friends and family. Great video 👍
Very informative! Thank you so much! I just accidentally ran across this (not even thinking about cast iron pans) at 4:30 AM when I was still in bed, trying to fall back to sleep. You encouraged me to get up and start working on my skillets. :) I have one that I love that was handed down from my husband's mother when she passed. On the back, it says nothing but 8 in one place and F2 in another. It would be fun to know more about it if you would happen to know. It has nice large pour spouts and a ring on the bottom. I subscribed to your channel!
Could be a Lodge or a Birmingham Stove and Range. If there's a notch (or 2 or 3) in the ring it's a Lodge. If there's no notches but there's a ridge on the bottom of the handle that runs all the way to the side of the pan it's a BSR. Those are the two most likely answers, but there are a few other possibilities.
the small dark heavy pan is a BSR...and they are always heavy, not as heavy as a Lodge, but they make good steak pans. the page one is an Unmarked Wagner another very nice pan.
Another place to hunt: a while back my neighbor's wife died, and I got a half dozen CI pieces for $5 to $10 each and his estate sale. Well seasoned and carefully used.
We have got a lot of ours from the garbage very rusted that people had thrown out, shame on them and we cleaned them up and seasoned them. Best pans to cook with ever.
Apart from a few soup pots, all my cookware is either cast iron or Pyrex. Getting pans for free and putting some love and care into them is the best way to get them.
Yeah it's great when you can find like that:-) I used to help out in a junk yard and i cannot remember how many pieces of cast iron i found in junk stoves!
The #3 Wagner at the first section of video (4:06) appears to be heat damaged. This usually happens when a piece of cast iron has been over heated by cleaning in a self cleaning oven or cleaned in an open fire. I say this because of the red color, and the (rust?) is not in an area/pattern that would be caused by water sitting in it. If it's just surface rust it will clean up and be fine, but if it's heat damaged it won't season. Thanks for the video! Love the CH&F skillet!
Thanks for your wisdom. I have a brother (we are goldsmiths) who claims everything Griswaol is the way to go. I always tap metal, because that’s exactly what you need to know. Haha. I’m never going to share this till he sees this. Thanks
My wife is crazy about this stuff, she dragged me to one of those civil war reenactment things and we paid a lot of money for some "fire irons" a chain and a big kettle. We've used it once.
@@TheMudbrooker One time we did, she made a giant pot of chicken soup. Came out good. I think for some reason she just wants to collect them, wants to have them, not really to use them.
When young I always carried a small cast iron skillet when backpacking but otherwise had not much interest. A few years ago a relative of my wife died here in Louisiana and their family gave us a dozen different cast iron pots and pans. Watching videos this week on cast iron I was pleased to discover that they were all vintage. I frequent 4 different Goodwill stores and one St. Vincent store but now I'm addicted to looking for cast iron. My heirs are going to wish I had taken up stamp-collecting instead.
Your video has been really helpful in researching out my three cast iron pans. The one that somewhat puzzles me is a #5 with LODGE across the 12 o'clock position, yet it has a heat ring with a single notch at the 12 o'clock position. Is this a transitional pan from about 1930 when they still had the name and a single notch?
You sure know your stuff! I have a limited collection of iron which suits me because I use what I have. Would love, though I don't need, a square griddle. Perfect for making four grilled cheese sandwiches at a time but I don't foresee needing to make that many at a time. Thanks for all the info and I look forward to the rest of this riveting series. :-D
I love your videos! Thank you for helping me learn all about my new favorite Hobby! I do have a question. I have a Slanted Griswold #5 with no #5 on the Handle. Is that common? Thanks!
If it's a Slant Logo with just "Erie" under the logo, yes. If it says "Erie, Pa. U.S.A." under the logo, it's not common. Griswold was a bit inconsistent with the numbers on the handles in the slant logo era.
I have my Grandmother’s cast iron pans mostly Griswold and some Wagner and she died in the 1930s. So they all are before this date. In addition to the numerous frying pans I have a Dutch oven with lid, a round griddle and a 2 burner griddle and a waffle iron that goes over a wood stove. Thank you for all this great information. ❤
Hi! These videos are amazing! I've looked at so many and I love how straight forward yours are. I've recently acquired a large cast iron cooking pot with lid. The only mark I can find is a very large raised 14 on the lid. It has a gate mark in the lid and dual gate marks in the bottom. I just learned what gate marks are. I didnt buy it because of this but was happy to learn it wasn't somebody fixing a hole. Which is what I had originally though. So I'm looking for a reference book or site pre 1900s. Any direction very appreciated as I find most articles about vintage dont address far enough back.
This is a good reference book for pre-1900 cast ware www.amazon.com/Early-American-Cast-Holloware-1645-1900/dp/0764345362/ref=sr_1_1?crid=7M6JIS20TC1B&dchild=1&keywords=early+american+cast+iron+holloware&qid=1614129283&sprefix=early+american+cast+iron%2Caps%2C198&sr=8-1
@@TheMudbrooker This is gold! This is the book people had been mentioning - the grey book - but I couldn't locate. Thanks very much for taking the time. Be well.
Finally getting around to watching your guide to cast iron! Its long over due! Thank you for putting this info out there! People like me totally need it! I love cast iron but am not educated with it! Until now that is :)
We moved recently and the previous owner left behind a cast iron pan. My mom gave it to my brother and his gf without showing it to me first. I spent the last couple of weeks with them , checked out the pan , and apparently it's a 90yo Wagner Ware! They were ready to give it to me before I identified it and cleaned and seasoned it. I guess I really missed out on a great pan but it's okay , that thing was SLICK. I put a steak in it and it just slid around in the bottom. Can't believe my mom gave that away.
I have a pan identical to one you have hanging. It is 11 by 3 inches deep with the finger impressions under the small handle to lift it opposite side of the handle. No markings on the pan. It has a very smooth interior, is not a thick pan for its size. It has some pitting on the bottom which looks like as described on another video that it could have been used early on, on a wood stove. I used it often for many years while my daughter was growing up and I had a gas stove. She is 61 now. I am now restoring it from it being in the garage for many years, and I sure would like to know who manufactured it.
My mom used to throw rusted pans in our fireplace to remove the rust before seasoning them. Is this correct? Also, I have a pan which seems well seasoned but has a section that is kind of a burgundy color. Do I need to worry about it?
I have a hammered no heat ring cast iron skillet that measures 8.5 inches from pour spout to pour spout. The bottom is marked 8_5 d. Do you know the manufacturer?
Call me silly, but when I hear a voice like yours? I just trust you lol. One them stand by your word, type voices. Could be wrong, I don't think I am though :]. guess I'll watch and find out :] -Edit- not wrong, you're indeed a stand up man. Appreciate the info.
What is the little skillet at 5:53 that is thick and heavy for its size? I have one very similar. There is only one marking, an "A" on the underside of the handle. Thanks
Thank you, Mudbrooker! I was just complaining about some cast iron I purchased the past year. All new...and all buggerdly heavy. I have had uneven luck with the pans in the past, also. I appreciate this video so much, my friend!
Long time, no see. If you're looking for the lightest cast, Griswold is usually the lightest followed by Wagner Ware and unmarked Wagner Ware. Older pans are lighter than newer pans and the unmarked Lodge and BSR are heavier than Gris. and Wagner but still lighter than brand new stuff. Go out and find yourself some rusty, crusty antique and I'll show you how to make it look like it just left the foundry. :)
The lightest and the best i ever had was a Piqa i know i spelled that wrong , Light the finish was like glass an then my ex girlfriend talked me out off it YAH!
THANKS FOR ALL THE GREAT INFO ... BUT THE PAN SIZE "NUMBER" REFERS TO THE BOTTOM DIAMETER ... NOT THE TOP DIAMETER WHICH IS ALWAYS LARGER ... SLOPING SIDES, REMEMBER? ... MADE TO FIT IN THE HOLES OF THE WOOD STOVE COOKING TOP WHEN THEIR LIDS WERE REMOVED ... UNLESS YOU HAVE THE LID WHICH CAME WITH THE PAN, YOU MUST ALWAYS LOOK FOR A LID "NUMBER" LARGER THAN A PAN "NUMBER" ...
Hi this is very interesting. I have a Wagner Ware Sidney -0- 10880 it's 3 inches high, 9 inches bottom 10 inches across on top, it has a slight wabble. I have had it for years and just love it. It was my Grandmothers. I would love to know what year it was made ? And what its worth ? Its in good condition. I'm just curious to know please. Thank you. Leontine Fox
From what you describe, it's a chicken fryer made from 1930-1960 or so. If you can send a couple of photos to themudbrooker@yahoo.com I might be able to narrow it down a bit. #8 Wagner chicken fryers usually sell for $45-$60.
Very informative! Thank you very much. I have a vintage Wagner number 10 with three vertical dot impressions on the underside of the handle, have you ever seen this?
Wagner did that fairly often, apparently to keep track of individual patterns (the forms used to make the molds to make the pans). Exactly why isn't clear but my guess is was to keep track of how many times a pattern was touched-up and reground as it wore down from the casting sand.
Makes sense, thank you. I have a good many pre 1940 WW pans and this is the only one with the “dimples”. These little idiosyncrasies make cast iron collecting fun
It is indeed, a very early one at that. It's a crying shame it's broken, but I don't have the heart to throw it away. I've been thinking I'll make a clock out of it one of these days.
I have a #8 pan that I think is a BSR based on the shape of the handle, the only marking on the bottom of the pan is 8.1 and it is very thin with a wobble. Any idea what it is?
I like your video, I am a cast iron enthusiast though, I don't have any I believe that are antiques. I do however have an Emeril Legasse cast iron that I've had for about 10 years. I bought it knowing nothing and was skeptical at first because by how rough it was. I cook on it almost daily and as time has worn on the cooking surface is smooth as glass. It's really heavy compared to a Lodge someone gave me recently of the same size. Do you have any knowledge of the Emeril cast irons, it seems good, but I've always wondered what experts say even though I'm satisfied.
The Emeril pans are made in China, they're decent pans but like you said, they're way heavier than they need to be. Most, if not all, of the celebrity chef branded cast iron cookware lines are made in China.
@@TheMudbrooker thanks for replying, I'm real happy with it now except for the heft. Though that's not much of a problem because it practically lives on my stove. I'm working on getting an equal finish on the Lodge, my thinking the more I cook with it the sooner it will achieve the finish I have in the Emeril.
Thanks brother you need to be in the movie industry, you have a good voice for narrating. A smart pan man to say the least. So much knowledge. Thanks for the info.
Thank you! I know this is an older video but it is very informative. Have been using cast iron pans (skillets 😂) most of my life and was on a quest for an additional skillet. Have given too many of them to my sons - most of which were bought at yard sales and such. I never paid much mind to the brand - rather, I judge it on how slick the interior surface is and the weight. Since I am on a quest for an additional skillet I started watching RUclipss ! Thank you in my quest ❤. I am 70 years old and never knew any of this 😂❤ But I am just buying a Pan !
So helpful!! Thank you!! There’s so much to know and you have great information to help me figure things out. I’m interested in quality but not a collector so I appreciated learning about the wobble not really being a problem.
I've been collecting and using cast iron cookware for 45 years. I found this video to be a very informative and helpful video. You have done a super job of explaining the basics for the beginner just starting out. Bravo my friend. Im looking forward to watching more of your videos. I just found you today. Thanks for sharing.
I looked at my irons from my great grandmother. My pans get used everyday. They have never been cleaned and the outsides are gross. I have always been afraid to clean them. I am now excited to bring them back to their glory. I looked hard and they have markings. I also have 3 hammered irons. Thank you for all the time and information.
This is a fantastic video. It combines history, cooking, and a bit of Americana. Your down to earth narration really makes the video!👍 Thank you!
You're welcome.
Thanks for your great tip to clean cast iron. I bought a couple of pretty badly rusted pieces. I saw your video and bought some oven cleaner, sprayed the pieces put them overnight into a double plastic bag then shoved into a clean garbage bag. Next morning took them out scrubbed a bit and then reseasoned them. They came out amazingly clean. Thank you your tips actually work.
I really enjoyed this video, finally I know what my iron skillet's are. They were handed down from my great grandma (6" Lodge from the twenty's) and my papa (10" Lodge from the fifty's). Thanks for sharing, I have saved all your videos so far. Great info
My late mother always loved cooking with her cast iron pans. Anyway, one day while cooking something on a small pan. I heard a loud snap. I looked over to see the pan on fire. She quickly put a lid on it, to extinguish the flames. The pan had cracked, and I guess the grease went threw the bottom, and ignited on our old electric range. My mother said, "In all my years, I've never seen that happen before". RIP Mom, Love You...
Buy the pan, not the brand. Great advice. Thanks for an informative video.
Thank you for teaching us about cast iron! I learned very much from watching these three videos. I had already restored and seasoned 3 pieces of old Griswald iron. I did not know all of your tricks however so now I want to redo my restoration!
Great video!
Seriously. Thanks. I loved that you can hear it ring. Contiguous composition always rings.
Enjoyed your video! You've got some unusual pans I haven't seen anywhere else. That 3-legged cauldron is a treasure. I'm not a collector, just a dedicated user. I'm 68 years old and I've never used any other kind of skillet. I also have a Birmingham Stove and Range Dutch oven that I bought new back in the 60s. I got it real cheap because it has a casting defect in the lid. That lid also happens to fit my Griswold #8 skillet perfectly! I just restored all my pans with instructions I found on RUclips. Some came out wonderful, others not so great, cuz I was just learning and not all the advice on RUclips was the best. My mistakes: Seasoning with flaxseed oil - it tends to flake - Crisco is my go-to now. I also think I might have warped both my Griswolds :-( by putting them in my self-cleaning oven. But I hadn't learned about "spinners" yet, so they might have been warped before I did that. But they're still good cookers, like you said. I'm about to watch your restoration video. Thanks again! Welcome to my RUclips cast iron family!
You from wood bury Briar.rose
Thanks very much. Instructive and entertaining at the same time. I live in South Africa and some years back I got a no. 8 Wagner chicken fryer for the equivalent of about $4.5 at an antique shop up the road in Darling. Today it is pretty much in daily use. It literally lives on the stove top.
I found you because:
Cast iron is hard to come by here, but I bought an iron skillet this holiday and am busy restoring it too. It is about the same size as the no. 8 Wagner, but so far as I can tell unmarked (lots of crud on the bottom). It also has a lid which fits well (Yippee), and has a good 'ting' noise on both. But it is almost certainly from a local forge as it has a wire handle over the top (to hang over a fire) and a wire handle on the lid (which was just forged with a large nipple with two holes to hold its wire). So it is an interesting oddity. I look forward to using it.
It is in it's second dose of oven cleaner and might attempt the electrolysis method depending on how it comes out of the second treatment.
Very much appreciated. Oh, and smelling salts for the cleaning video were not required, that is exactly how my Wagner is maintained, and it hasn't missed a step...
Everyone seems to be interested in the 4 most popular brands, but I honestly love finding the mystery skillets more. Weird hammer finishes, local smaller foundries, and occasionally a century old piece shows up.
Thank you for such a wonderful real life video. I love cooking with cast iron. I have several Lodge Logic pieces (pots, skillets, griddles) and I find them great to cook with even though I am not a fan of the texture. My great-grandmothers's WagnerWare 3c is my favorite, it was/is known as "the grilled cheese pan" for obvious reason. My second best skillet was passed down through my husband's family: a lovely number 8 that is old and smooth. It and a $2.00 yard sale number 5 Griswold are my most used skillets. I tell people that I will use my cast iron until it is too heavy for me. Now I am going to see if I can ID that number 8.
I like the structure of your video because you speak NOT as a collector but as a USER...not that collectors are bad videos...but they are partial, as I am not, to real use...spinners, pits, and defects...are not a concern for me unless it interferes with the actual cooking...lol. I'm a sub now...because I'm a Taiwan user as well and an Ozark Trails Lover...Got a video uploading in the morning on a Lodge Vintage #5 that needed a home but collectors passed it over because it had a belly button as I call it...lol.
I’m at my wits end with my cast iron skillet! I’m finding out there is a very legitimate reason people dread working with it. I have watched countless hours of instructional videos and I have paid very close attention. I’ve seasoned my iron skillet well and the first time I cooked bacon in it, it seared so badly I simply could not get it off the skillet. I have never seen meat get stuck to any pan like that bacon did on that day. I cleaned it very well and then I put it up and pouted for a few weeks. Then I decided to reconcile with the darn thing again. I sweet talked it, bought it flowers, put on some nice soothing music and everything. Then I went ahead and seasoned it 5 more times. The next time I cooked bacon in it, it cooked perfectly; however, upon drying it off I noticed thousands of little tiny black specks were transferring onto my towel. After cleaning it and drying it off the pan looked worse than when I bought it. The black specks keep shedding off and now the pan has lighter patches where it appears the seasoning has come off from the surface and now we’re not on speaking terms again. The BETRAYAL!! It’s a lodge and it has a very very rough surface. I don’t know whether I should strip it and start all over or if I should just keep seasoning it and hope the bare patches will disappear over time. I’m so discouraged. I just want us to get along and I want nothing more than to learn how to work with cast iron but they’re just so delicate and sensitive to any stress. I’m starting to think like the gardener with the green thumb has the magic touch and a very robust consistent harvest, there are some people that truly just have a way with cast iron. This darn iron skillet keeps challenging me to a fight and frankly I’m tired of having my backside handed to me by a 5 lbs frying pan! I don’t know if this shedding is to be expected with new skillets or if I might have scrubbed it too hard after this second round of bacon.
Enjoyed this video - especially the end part on lids. I like to find very old pots, spiders, and Dutch ovens but it is hard to find them with their original lids. I’d love to hear more of your insights regarding finding good lids for them. For example, I have a 11 inch spider and have not been able to find a good lid for it but I did find a round hanging griddle that fits it perfectly. I also use an old tin plate as a lid for one of my 3-legged pots. Best wishes.
You're the AvE of cast iron. Love it. Learning a lot. Think I'm gonna call you Uncle Iron.
If only we knew what an AvE is.....
@@lancebaker1374 AvE is a world traveled engineer and highly regarded YT'r. Latest vjo: ruclips.net/video/AERn5japFs8/видео.html
i totally fell in love with cast iron. greetings from 🇩🇪
Thanks for the info. I want to start collecting cast iron . This definitely helps.
One of the better guides
Hi, I'm a new subscriber. I've been getting into antique cast iron. Last December, I bought a very clean 1930s era Favorite Piqua No.9. And then, I found a 1912 era slant Griswold No.9 with a heat ring! I'm enjoying your videos and always have a shot of nice bourbon when I watch! :)
Keep up the great work, love your cook stove! I run a channel about antique tubular lanterns, if you care to stop by sometime, that sort of thing interests you.
Your knowledge is vast and thank you for sharing!
Respectfully,
RayoRob-
It sure was about time I learned about what I've been cooking on for so long. I have my Mom's skillet,s & possibly some of her Moms. They're definitely my favorite pans to use. I just didn't know what I didn't know. Your collection is impressive & looks so great on your wall. I watched 3 of your videos & I've got to investigate what I have. Greatly appreciate you & T.Y. for yr inspiration. 😳
This site www.castironcollector.com/trademarks.php has a lot of pictures and information to help identify cast iron.
Great explanation of good vs bad cast iron
Great video - So many interesting overlaps in the identifying markers of old ironwork and old print-work.
Very informative for us newer collectors
I realize this is an older video but the information is still solid. One thing I do to keep the coast down is offer to clean and season pans for businesses. If they have pieces that won't sell I offer to clean it for free then it sells quickly. They're hooked after that so I'll take cast iron or money for payment depending on what they want to do. It's nice to get a #11 Wagner Sidney O w/ outside heat ring just for cleaning a few pieces. Yesterday I made a $100 for cleaning which will be gone the next time my wife and I go junkin. The bottom line is you can have a nice collection without spending a fortune out of pocket.
Excellent! My cast iron is from grandma...1920s vintage Wagner...I use it every day here near Ester, Alaska.
Thank you for the great videos. You made it much simpler than the way I learned through You tube. I learned a lot about how to take care of my wifes grandmothers skillets.
Great video. Very informative and relevant. I saw your video on TheKneady Homesteader. I liked it so much I decided to check out your channel. I am glad I did. Thanks for sharing your knowledge and experience.
Thank you for the education. I've found a couple of my pans at small town garage sales.
Great video. I overpaid for many of my cast iron pieces only because I bought through eBay. Lots of people were bidding for the items I ended up winning, so that drove up the cost, but the shipping is where I really took a hit. Simply put, the pans are heavy, and shipping costs are calculated by weight. On the other hand, the convenience of buying online versus going to estate sales, buying gas, time driving, etc. balances out the costs of shipping in my opinion.
I use my cast iron cookware. I am not a collector. So, I do not have many pans of cash value. My most valuable pieces in terms of cash are a small logo Griswold #9 griddle, a Griswold popover pan, and a #9 Wagner Sydney O skillet.
I do have quite a few Wagner pieces that are pre 1960, so I suppose they do have some cash value as well. I have a slightly wobbly #10 skillet, two #8 chicken fryers, a #5 skillet, and a post 1960 #9 griddle.
The best value in my collection are two unmarked skillets, a #7 and a #8. I got together in one purchase from eBay for only $15. Although they may be have the oldest production date (I estimate 1920-1930) they are not "marquee" names like Griswold. One is from a Chicago foundry and a well made skillet with a smooth cooking surface like Griswold.
Great job - very informative. I watched all three in this series. You have a great demeanor for this - a natural teacher. You also sound just like Tom Bodett - one of my favorite voice actors, writers, and humorists.
That old 3 legged kettle from the 1840-1870s is amazing. EVen more amazing is the price you paid. Thanks to this video I found out that both skillets I recently cleaned and seasoned were my grandparents. One is a vintage lodge one notch (1930s-40s) number 8. The other is a small logo (I'm guessing) Griswold number 3. Still trying to date the number 3 griswold. This video is filled with great knowledge. Thanks!
Follow this link www.castironcollector.com/trademarks.php and click on the photo icons and you should be able to date the Griswold.
Hi mate quick question about heat rings. I have an old wood stove should I just get pans with heat ring or both. Love your channel great videos. Cheers Terry-Australia
Boy do you know your subject. Thank you for the very informative video.
Lids can be a problem. I have two Wagner chicken fryers. A modern Lodge Dutch oven lid fits them perfect. I did find a glass Wagner lid on Ironman. Works out great when I’m frying a bunch of chicken. I have around 75 pcs of iron. Have never sold one. I use, and have given many away to friends and family. Great video 👍
Very informative! Thank you so much! I just accidentally ran across this (not even thinking about cast iron pans) at 4:30 AM when I was still in bed, trying to fall back to sleep. You encouraged me to get up and start working on my skillets. :) I have one that I love that was handed down from my husband's mother when she passed. On the back, it says nothing but 8 in one place and F2 in another. It would be fun to know more about it if you would happen to know. It has nice large pour spouts and a ring on the bottom. I subscribed to your channel!
Could be a Lodge or a Birmingham Stove and Range. If there's a notch (or 2 or 3) in the ring it's a Lodge. If there's no notches but there's a ridge on the bottom of the handle that runs all the way to the side of the pan it's a BSR. Those are the two most likely answers, but there are a few other possibilities.
the small dark heavy pan is a BSR...and they are always heavy, not as heavy as a Lodge, but they make good steak pans. the page one is an Unmarked Wagner another very nice pan.
Another place to hunt: a while back my neighbor's wife died, and I got a half dozen CI pieces for $5 to $10 each and his estate sale. Well seasoned and carefully used.
Well, just learned that my skillet I cook breakfast in every morning is an old Lodge.
We have got a lot of ours from the garbage very rusted that people had thrown out, shame on them and we cleaned them up and seasoned them. Best pans to cook with ever.
Apart from a few soup pots, all my cookware is either cast iron or Pyrex. Getting pans for free and putting some love and care into them is the best way to get them.
Yeah it's great when you can find like that:-) I used to help out in a junk yard and i cannot remember how many pieces of cast iron i found in junk stoves!
This video has lots of practical information. Thanks.
Very informative, thank you. A freind gave me a Wagner 1102D, heat ring in excellent condition.
Fascinating subject.
Happy Trails and good luck 🍀✌
Very good info for a beginner. Thank you.
The #3 Wagner at the first section of video (4:06) appears to be heat damaged. This usually happens when a piece of cast iron has been over heated by cleaning in a self cleaning oven or cleaned in an open fire. I say this because of the red color, and the (rust?) is not in an area/pattern that would be caused by water sitting in it. If it's just surface rust it will clean up and be fine, but if it's heat damaged it won't season.
Thanks for the video! Love the CH&F skillet!
Thanks for your wisdom. I have a brother (we are goldsmiths) who claims everything Griswaol is the way to go. I always tap metal, because that’s exactly what you need to know. Haha. I’m never going to share this till he sees this. Thanks
Thank you for the interesting and informative video on cast iron. Keep up the excellent work!!
My wife is crazy about this stuff, she dragged me to one of those civil war reenactment things and we paid a lot of money for some "fire irons" a chain and a big kettle. We've used it once.
You don't use it at your cabin? Put a lid on it and it'll work great for roasting meat over a fire.
@@TheMudbrooker One time we did, she made a giant pot of chicken soup. Came out good. I think for some reason she just wants to collect them, wants to have them, not really to use them.
@@demonorse Good lord, don't let her watch this then, you'll be ass deep in cast iron before long. :)
When young I always carried a small cast iron skillet when backpacking but otherwise had not much interest. A few years ago a relative of my wife died here in Louisiana and their family gave us a dozen different cast iron pots and pans. Watching videos this week on cast iron I was pleased to discover that they were all vintage. I frequent 4 different Goodwill stores and one St. Vincent store but now I'm addicted to looking for cast iron. My heirs are going to wish I had taken up stamp-collecting instead.
"Pan of the beast"!!!! Loooool
Your video has been really helpful in researching out my three cast iron pans. The one that somewhat puzzles me is a #5 with LODGE across the 12 o'clock position, yet it has a heat ring with a single notch at the 12 o'clock position. Is this a transitional pan from about 1930 when they still had the name and a single notch?
You sure know your stuff! I have a limited collection of iron which suits me because I use what I have. Would love, though I don't need, a square griddle. Perfect for making four grilled cheese sandwiches at a time but I don't foresee needing to make that many at a time.
Thanks for all the info and I look forward to the rest of this riveting series. :-D
I'm hoping to get the next video done by next weekend but that assumes I don't have some new domestic disaster to deal with.
I love your videos! Thank you for helping me learn all about my new favorite Hobby! I do have a question. I have a Slanted Griswold #5 with no #5 on the Handle. Is that common? Thanks!
If it's a Slant Logo with just "Erie" under the logo, yes. If it says "Erie, Pa. U.S.A." under the logo, it's not common. Griswold was a bit inconsistent with the numbers on the handles in the slant logo era.
Thank you so much! I appreciate you making videos. Keep up the amazing work!
"Pan of the Beast!" My wife didn't grow up in church. Had to explain that to her when I bust out laughing.
@Jason Black sadly, yes. I got dragged to church so often, I did grow up there.
I worked for a long time in Erie PA and know Griswold very well.
I have my Grandmother’s cast iron pans mostly Griswold and some Wagner and she died in the 1930s. So they all are before this date. In addition to the numerous frying pans I have a Dutch oven with lid, a round griddle and a 2 burner griddle and a waffle iron that goes over a wood stove. Thank you for all this great information. ❤
Man I thought I inew a but about the subject, it turns out I knew almost nothing. Quite informative
BSRs can also have the “large” ears...or pour spouts....red mountain are pre 1960 and century series are after 1960....nice video
Hi! These videos are amazing! I've looked at so many and I love how straight forward yours are. I've recently acquired a large cast iron cooking pot with lid. The only mark I can find is a very large raised 14 on the lid. It has a gate mark in the lid and dual gate marks in the bottom. I just learned what gate marks are. I didnt buy it because of this but was happy to learn it wasn't somebody fixing a hole. Which is what I had originally though. So I'm looking for a reference book or site pre 1900s. Any direction very appreciated as I find most articles about vintage dont address far enough back.
This is a good reference book for pre-1900 cast ware www.amazon.com/Early-American-Cast-Holloware-1645-1900/dp/0764345362/ref=sr_1_1?crid=7M6JIS20TC1B&dchild=1&keywords=early+american+cast+iron+holloware&qid=1614129283&sprefix=early+american+cast+iron%2Caps%2C198&sr=8-1
@@TheMudbrooker This is gold! This is the book people had been mentioning - the grey book - but I couldn't locate. Thanks very much for taking the time. Be well.
Good video. I have a small collection of ci pans and cook on one or two every day. But I still learned several good tid bits from your video. Thanks.
When I've had a mild 'wobbler,' I've taken the bottom down slightly with course sandpaper on a an oribtal.
Finally getting around to watching your guide to cast iron! Its long over due! Thank you for putting this info out there! People like me totally need it! I love cast iron but am not educated with it! Until now that is :)
Very interesting & informative information. Thank you for sharing your knowledge.
Thanks for sharing your iron clad cast iron factoids. Good to know!
Thank you for sharing this great information, I appreciate your knowledge!
You're welcome, I hope the next two videos are as helpful.
You give good information. Thanx.
Thanks. Great info.
We moved recently and the previous owner left behind a cast iron pan. My mom gave it to my brother and his gf without showing it to me first. I spent the last couple of weeks with them , checked out the pan , and apparently it's a 90yo Wagner Ware! They were ready to give it to me before I identified it and cleaned and seasoned it. I guess I really missed out on a great pan but it's okay , that thing was SLICK. I put a steak in it and it just slid around in the bottom. Can't believe my mom gave that away.
I have a pan identical to one you have hanging. It is 11 by 3 inches deep with the finger impressions under the small handle to lift it opposite side of the handle. No markings on the pan. It has a very smooth interior, is not a thick pan for its size. It has some pitting on the bottom which looks like as described on another video that it could have been used early on, on a wood stove. I used it often for many years while my daughter was growing up and I had a gas stove. She is 61 now. I am now restoring it from it being in the garage for many years, and I sure would like to know who manufactured it.
Really great tips! Thank you
The pan number has no bearing on lids. The number identifies the size of the burner opening for a wood-burning stove.
LOL The pan of the Beast!
Hopefully once seasoned it will be 667 grams !
Skip my last comment. After watching one of your videos I now know my skillet is a chicago
Love the "pan of the beast." LOL
Some good info. Thx. Be nice to your dog.
Nice collection
My mom used to throw rusted pans in our fireplace to remove the rust before seasoning them. Is this correct?
Also, I have a pan which seems well seasoned but has a section that is kind of a burgundy color. Do I need to worry about it?
BRILLIANT ADVICE, MICK FROM UK.
Thank you.
Excellent video. I've learned so much. Thank you.
Thank you, there's more coming so stay tuned.
I have a hammered no heat ring cast iron skillet that measures 8.5 inches from pour spout to pour spout. The bottom is marked 8_5 d. Do you know the manufacturer?
Call me silly, but when I hear a voice like yours? I just trust you lol. One them stand by your word, type voices. Could be wrong, I don't think I am though :]. guess I'll watch and find out :] -Edit- not wrong, you're indeed a stand up man. Appreciate the info.
AWESOME VIDEO... Give a man a fish and he eats for a day. Teach a man to fish and he can live for a lifetime. Fantastic video. SO very appreciated.
What is the little skillet at 5:53 that is thick and heavy for its size? I have one very similar. There is only one marking, an "A" on the underside of the handle. Thanks
That's a Chinese import, can't tell if there's a specific maker.
Thank you, Mudbrooker! I was just complaining about some cast iron I purchased the past year. All new...and all buggerdly heavy. I have had uneven luck with the pans in the past, also. I appreciate this video so much, my friend!
Long time, no see. If you're looking for the lightest cast, Griswold is usually the lightest followed by Wagner Ware and unmarked Wagner Ware. Older pans are lighter than newer pans and the unmarked Lodge and BSR are heavier than Gris. and Wagner but still lighter than brand new stuff. Go out and find yourself some rusty, crusty antique and I'll show you how to make it look like it just left the foundry. :)
The lightest and the best i ever had was a Piqa i know i spelled that wrong , Light the finish was like glass an then my ex girlfriend talked me out off it YAH!
Thanks for the informative video
You're welcome.
THANKS FOR ALL THE GREAT INFO ... BUT THE PAN SIZE "NUMBER" REFERS TO THE BOTTOM DIAMETER ... NOT THE TOP DIAMETER WHICH IS ALWAYS LARGER ... SLOPING SIDES, REMEMBER? ... MADE TO FIT IN THE HOLES OF THE WOOD STOVE COOKING TOP WHEN THEIR LIDS WERE REMOVED ... UNLESS YOU HAVE THE LID WHICH CAME WITH THE PAN, YOU MUST ALWAYS LOOK FOR A LID "NUMBER" LARGER THAN A PAN "NUMBER" ...
Hi this is very interesting. I have a Wagner Ware Sidney -0- 10880 it's 3 inches high, 9 inches bottom 10 inches across on top, it has a slight wabble. I have had it for years and just love it. It was my Grandmothers. I would love to know what year it was made ? And what its worth ? Its in good condition. I'm just curious to know please. Thank you. Leontine Fox
From what you describe, it's a chicken fryer made from 1930-1960 or so. If you can send a couple of photos to themudbrooker@yahoo.com I might be able to narrow it down a bit. #8 Wagner chicken fryers usually sell for $45-$60.
Very informative! Thank you very much. I have a vintage Wagner number 10 with three vertical dot impressions on the underside of the handle, have you ever seen this?
Wagner did that fairly often, apparently to keep track of individual patterns (the forms used to make the molds to make the pans). Exactly why isn't clear but my guess is was to keep track of how many times a pattern was touched-up and reground as it wore down from the casting sand.
Makes sense, thank you. I have a good many pre 1940 WW pans and this is the only one with the “dimples”. These little idiosyncrasies make cast iron collecting fun
Oh boy, I cant wait to slap all my pans LOL
The only use I'd have for a cracked or severely warped pan, is to putty up the crack, paint it and make a custom wall decoration out of it.
I noticed that one of the broken skillets looks like it was a Wapak Hollow Ware pan made in Wapakoneta, OH. My husband is from Wapakoneta.
It is indeed, a very early one at that. It's a crying shame it's broken, but I don't have the heart to throw it away. I've been thinking I'll make a clock out of it one of these days.
Lots of great information!
I have a #8 pan that I think is a BSR based on the shape of the handle, the only marking on the bottom of the pan is 8.1 and it is very thin with a wobble. Any idea what it is?
Most likely a BSR Red Mountain series. Very good pans, made from the 20's up til about 1950.
Hello I would like to know what the metal disks on your stove are called where I can buy them. Thank you
Those are heat diffusers, I've had them for years but if you search for "nordic ware burner plate" on Amazon, they come right up.
@@TheMudbrooker Thank you
I'm about using pounds and ounces for the weights please
Lodge sold glass lids. All thrift stores have a bunch of glass lids. Bring a tape measure .
Thank you
I like your video, I am a cast iron enthusiast though, I don't have any I believe that are antiques. I do however have an Emeril Legasse cast iron that I've had for about 10 years. I bought it knowing nothing and was skeptical at first because by how rough it was. I cook on it almost daily and as time has worn on the cooking surface is smooth as glass. It's really heavy compared to a Lodge someone gave me recently of the same size. Do you have any knowledge of the Emeril cast irons, it seems good, but I've always wondered what experts say even though I'm satisfied.
The Emeril pans are made in China, they're decent pans but like you said, they're way heavier than they need to be. Most, if not all, of the celebrity chef branded cast iron cookware lines are made in China.
@@TheMudbrooker thanks for replying, I'm real happy with it now except for the heft. Though that's not much of a problem because it practically lives on my stove. I'm working on getting an equal finish on the Lodge, my thinking the more I cook with it the sooner it will achieve the finish I have in the Emeril.