This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind in this conversion there is also the advantage that I use the original charger for 36 v batteries because I did not use the tool battery ... the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation bosch Jigsaw 36v are few tools to compete with this I have to somehow make a movie with him and put on yotube
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
Can I make some suggestions: At the introduction no mention of what was wrong with the tool. Have you thought maybe some commentary may explain what you are about to do. Did this tool need complete stripping. I bet it was not necessary. A simple greasing and oiling woulld have sufficed. Your battery rebuild was great, but was the battery faulty? That cleaning and washing was mostly not needed as that tool would have worked fine. Also does bicarbonate of soda dissolve grease, surely not. Grease is a polar substance and dissolves in similar materials, like petrol. Otherwise your video was an unnneccessary rebuild. Please try explaining what you are doing. by the way I taught Metalwork here in Sydney Australia for 25 years, and repair most things.
Sir which solvent is a better cleaner for gear box parts, diesel or petrol? The one you use in ultrasonic cleaning? Can you please suggest the best cleaner? Also can you make a video of repairing the variable speed controller of this machine?
I'm no expert but I noticed that you changed the battery terminal wire but you didn't change drill motor wire. I think you should change that too because that can also be in bad shape and lithium battery's are powerful. to conduct that power you should use better wire To get the maximum output from the device. By the way that's a great restoration
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine "гарно є" :D
Where do you go for the printed case labels, or do you recreate them? The commutator ring looks very worn, that might stop me proceeding. One benefit of more modern unuts is more powerful Brushless motors & LiPo batteries. In combination they utterly transformed cordless tools. Where did you get your ultrasonic cleaner? It looks good quality & very effective.
Better than the OG trash battery. God those were awful. I've no clue who ran Bosch's battery division when these came out, but it was utter garbage. I was actually using an Einhell conversion adapter made and sold by a french guy with mine, it was that bad.
Bosch powertools, are very great , soilds built of tools..early years, many company 's want to copy 's the best ....now,best tools , repairs...open everything 's.... looks,same as other branded .....
What is the brand and model of the tailstock machine you use? In what settings are you using it? Also, where do you get 18650 batteries, adhesive labels and metal strips? Do these have links?
Hi I been watching your video very helpful how you converting old battery pack to new Lithium I just check you have used 3.7 * 14 battery in this one and in description shows that 7 cells. which one is correct please reply, i have few old 2 makita 14.4, two another make which is 12 v and one i have 24 v to convert to lithium pack any suggestion please reply.
Your battery pack rebuilds are the best👌
Ya mind blowing
This one was fairly easy to pull out since it had the parts to be removed, and I love that in such battery powers Tools, it's easy to replace batteries from the core
Thank you very much!
@@freemanontheland24 ฟฟฟฟฟฟฟฟฟฟฟฟฟฟี . ่.อ้อี เธอฮา
ល
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
The Ingersoll Rand 114GQC Air Hammer ruclips.net/user/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
Love these early cordless drill designs. They basically mated a fat battery pack to a regular cord drill chassis. Nice finds at your shop
I think he finds them at a scrap yard but they are very well preserved and I love that
I found it form Japan power tools recycle shop.
@@gear_show Do you live in Japan?
@@danesz021 nah, i think he just flown there to buy a scrapped hammer drill to restore ;) :)
Otra estupenda restauración de taladro percutor rotatorio Bosch 24V | GBH 24VF, mis respetos y saludos desde Venezuela.👍💯👍👊🤘
Muchas gracias, me alegro mucho que este video aparezca en Veneuela
Комментарий в поддержку канала и ролика, а также труда мастера который отреставрировал отбойный молоток.
What a beautiful job and results, congratulations. I will never do this job but I enjoyed it as you have no idea, I have seen the video completely and the Makita drill conversion from wired to 18V thank you from Queretaro Mexico.
Saving the planet one battery powered tool at a time. Great job!
Yes, thank you very much :) You're always watch my video.
Some really do have a lot of time and patience. One not one of them but I do enjoy watching these videos.
Glad you like them!
Your Hammer Drill Rebuilds Are Amazing!!
Good work! Nice to see professional man's job🙂
I like the way another drill "repairs" another drill throughout the restoration
Amazing, it took me 2 days to renovate and then replace the batteries the batteries in my 35 year old Bosch hammer drill yet it only took you 22 minutes.....Well done.
Raj
Wonderful restoration of a mammoth Bosch SDS Drill.
Yes, thank you
Great technique ☝️👍👍👍
Thank you!
Excellent restoration bonus with battery upgrade better than factory.
Thank you! Glad you like them
I'm a professional electromechanical repairman ... not necessarily a very advanced one ... but I like to upgrade like this too ... I bought a bosch Jigsaw 24v with nicdm batteries and I tested it to see if it supports 36v batteries li ion from bosch .... total success ... I managed to change the tool housing and the battery slides and connects like 36v tools .... the coupling was successful and from the outside you almost don't realize that it is not so provided by the factory even as the size in length fits incredibly .... operation ??? impeccable ... I have been using it for some time, there is no sign of overload or due effects of the larger battery ... or stress of any kind
in this conversion there is also the advantage
that I use the original charger for 36 v batteries because I did not use the tool battery ...
the effort was especially worth it because there are some tools from the old generation that are higher in quality than those from the new generation
bosch Jigsaw 36v are few tools to compete with this
I have to somehow make a movie with him and put on yotube
yes, please make a video and publish it on youtube
Un profesional trabajando ⚒
Saludos desde Costa Rica 🇨🇷
Subscribed. My favorite toll rebuilt channel on RUclips.
Thanks 👍👍
شكرا لكم اخي دائما مميز
You're welcome!
You are true professional,amazing good job.
Thank you so much 😀
Tohare paas sb suvidha baay bhaiya.......mauj kra....,,🥰
1:03, opens battery pack, finds spider nest. "There's your Problem!"
Yes, it is haha...
Wow fantastic work
Can u plz tell how can I get that charger on amazon
There are a lot of them on Amazon you choose it.
www.amazon.com/s?k=29.4+volt+charger&ref=nb_sb_noss_1
@@gear_show OK thanks a lot
@@gear_show can u send me a link for Indians rs it is showing dollar
Meraviglioso lavoro
Grazie!
Hermano,que buenos videos quisiera tener tu habilidad.
Amazing restoration ! - Well done - Great outcome ! :)
أحسنت صنعنآ 👏👏👍👍
Thank you!
Oh new video 👍👍🤩🤩
Hope you enjoyed it!
@@gear_show for sure
Best rotary hammers out there are Bosch.
Very nice 👍 work Man 👍
Thanks 👍
Thanks 👍
Thanks 👍
👍
Best drill I ever owned!!!!
I thought this channel couldn't get better, but then you added funny slow motion. Keep up the awesome work!
Nicely done 👍👍👍Thanks for sharing
Thanks for watching
Small tool, big power. So relaxing to watch Your videos!
2:16 , that would make an excellent poster! Or wallpaper background.
Wow, I'm happy to hear that, thank you!
Well the video is in 1080p. You can just take a screenshot.
@@KISSFanDan1995 I may just, but a poster would be a real prize.
@@jdniedner that’d be awesome too.
Very nice Thanks you so much
Fantastic
Simple smart restoration
Glad you like it!
1:07 Bro why you changed batteries. they seem very good
Becase the OG batteries were shit.
:D Haha, because I want to change it.
I like to see it right away to see it 👍👍👍👍👍
Yes, Glad it is right, thank you!
This „Made in Germany“ hammer drill is a beast. Great to it in future times.
It sure is!
@@gear_show if you can convert it to brushless it would be even better
Another fantastic restoration and camera work. The hammer drill battery rebuild is awesome also. You should have Sky make a brief appearance in more videos. The general public love that stuff and me too. Doug & Skye USA
Q2⅔e³⁴⁵⁶⁷⁸⁹⁰
P
record player dust cover? Or power tools wash basin? Why not both?
It is record plyer cover.
4:25 best part of any restoration
Great patience, great work! Well done! 🔥
Yes, thanks
Very creative and cute👌
Many many thanks
Can I make some suggestions:
At the introduction no mention of what was wrong with the tool. Have you thought maybe some commentary may explain what you are about to do. Did this tool need complete stripping. I bet it was not necessary. A simple greasing and oiling woulld have sufficed.
Your battery rebuild was great, but was the battery faulty?
That cleaning and washing was mostly not needed as that tool would have worked fine. Also does bicarbonate of soda dissolve grease, surely not. Grease is a polar substance and dissolves in similar materials, like petrol. Otherwise your video was an unnneccessary rebuild.
Please try explaining what you are doing. by the way I taught Metalwork here in Sydney Australia for 25 years, and repair most things.
Sir which solvent is a better cleaner for gear box parts, diesel or petrol? The one you use in ultrasonic cleaning? Can you please suggest the best cleaner? Also can you make a video of repairing the variable speed controller of this machine?
Bosch brand it’s very strong I like it
Good job 👍🏻
I'm no expert but I noticed that you changed the battery terminal wire but you didn't change drill motor wire.
I think you should change that too because that can also be in bad shape and lithium battery's are powerful. to conduct that power you should use better wire To get the maximum output from the device.
By the way that's a great restoration
Okay, great idea! thank you so much for sharing.
@@gear_show Im happy that I helped you notice your only error
Excellent review. Thanks.
Very welcome!
Looks like 2000mAh cells, but it doesn't matter. Try to make double nickel strip between all series. Now between 5-6 and 6-7 is a single strip. Anyway, top quality video as usual, pleasure to watch.
im impressed that you can connect all parts at the end,Nice
the internals of the drill are in very good shape
Sweetheart and cool content bro
Thank you so much bro :D
Hermano de @Gear Show una véz más realizastes excelente trabajo... Te Felicito, la Herramienta quedó mejor que original de fábrica. Fuerte Abrazo y Saludos desde Venezuela!!!
I have a black & decker power drill/ screw driver but the battery was dead. The whole set was bought ten years ago which is around usd60 with 2 battery packs bundled. Used a couple of times only and looks brand new. I asked the shop and they do not have a replacement battery pack. Then I found that buying 10 pieces of 1.2v NiMH cell may cost more than usd60.
Hi can this drill with an adaptor + soil drill bit turn into a soil digger? Thank you
Really good 🛠️
Thank you sir
My favorite part is the plastic parts cleaning
Oh, really! I think that part is not important.
Hi, can you give me a link of the chuck? I need a newone for my 24vre and cannot find...thanks, great video.
Amazing !!just what I was looking for ,for many years!!!Can I re-use the original charger?
10:07 which number oil did you use
I use kixx grease number 2.
Why not use the ultrasonic washer for plastics also?
Cái đầu kẹp mũi khoan đó mua ở đâu vậy bạn
Hello.
Did you use the old original control unit (the same one that worked with NI-MН) or replaced it with a new one designed for LI-PO?
Regards, Ivan
Cool stuff 👍
Thanks for the visit
2:17 В идеале.
Perfect
Yes, just replace carbon brushes
@@gear_show Excuse me, are you from Japan? I am glad that your videos are watched in my homeland (I am from Ukraine). I just want to note that accelerated video material spoils the atmosphere a bit, but I am glad that you bought a 60-frame camera, or finally decided to record material at 60 fps. It should also be noted that on the packaging of lithium-ion batteries your channel is the top. I personally watch you along with my mechanics and TysyTube Restoration. Thank you for your efforts, as we say in Ukraine
"гарно є" :D
انته الافضل دائما
Thank you!
PPE is very importat! nice to see!!! Love your videos!
Yes! Thank you!
Great work!
Thank you!
Просто круто 👍👍👍👍👍
잠자기에 딱 좋은소리👍 백색소리👍
Why did you leave some parts sticking out of the gasoline? Do you rotate them at all?
6:23
This Gasoline still has some use?
Or its go to trash?
I will use it again next time.
@@gear_show 🥰
Love your videos, I want to know what bit set that is you use with the makita screwdriver
Красава мужик- cool man
Where do you go for the printed case labels, or do you recreate them? The commutator ring looks very worn, that might stop me proceeding.
One benefit of more modern unuts is more powerful Brushless motors & LiPo batteries. In combination they utterly transformed cordless tools.
Where did you get your ultrasonic cleaner? It looks good quality & very effective.
Awesome video as always. Greetings from the UK.
best Restoration ever
Отличная работа!
you guys engineer man👍💯 points
waoo mantap model ini yg kusuka,
Wowwwwww sir amazing
Thank you!
What was the machine and it's purpose that you placed the gas mixture into? I believe the brand was Fuyama.
Esse cara e fantástico parabens
It will work for many years again. 👍
And how does the temperature sensor work on this BMS?
The temperature sensor disconnect power from battery when overloading to protect the batteries.
Even at 4Ah instead of 6Ah, still good capacity. Question is, how long is charging time?
Better than the OG trash battery. God those were awful. I've no clue who ran Bosch's battery division when these came out, but it was utter garbage. I was actually using an Einhell conversion adapter made and sold by a french guy with mine, it was that bad.
I'm not yet test it. I think around 40min to 80min
Sir, Where is your work shop
My work shop is located in Cambodia.
O melhor de todos
Thank you!
I have a question for you.
Where can I buy a bearing kit both types with the carch inner and outer of the bearing
СПАСИБО ЗА ВИДЕО!!!
ПОЖАЛУЙСТА
How do you get all those parts back correctly on first try?
Any tips n tricks?
I bought lost chuck from China.
Bosch powertools, are very great , soilds built of tools..early years, many company 's want to copy 's the best ....now,best tools , repairs...open everything 's.... looks,same as other branded .....
What is the brand and model of the tailstock machine you use? In what settings are you using it? Also, where do you get 18650 batteries, adhesive labels and metal strips? Do these have links?
Super👍🏻
Thank you 👍
Hi Mr. Gear Show,
is it possible to fix a Makita Radio?
Got some problems with my.
THX
Greetings from germany
I've always been curious, why use baking soda and detergent to clean the plastics?
After you trying it, you will know it.
Hi I been watching your video very helpful how you converting old battery pack to new Lithium I just check you have used 3.7 * 14 battery in this one and in description shows that 7 cells. which one is correct please reply, i have few old 2 makita 14.4, two another make which is 12 v and one i have 24 v to convert to lithium pack any suggestion please reply.