For anyone skimming through the comments... here's my current set up for someone who's 6'2" and 180 lbs. Hope this helps someone get on the right track. Front Preload (0-10): 4 Rebound (0-14): 9 Rear Compression/Preload (0-20): 8 Rebound (0-18): 10
You are the same weight as me and I'm amazed you find the stock Talaria rear shock sufficient. I bottom mine out almost every time I use the bike, and as mine is an adapted road legal TL45 I've broken the number plate on the road and just now the plastic thing it fits to. :-(. I'm wondering if you might have any advice? How comes yours is OK for you? I've already would the spring up a fair bit to try and sort out the problem.
WoW school is out for summer. And proFessor Josh runs a suspension class, thanks again for all the TIP & tricks for us late to the party riders. Tomorrow at the crack of NooN I pull my MX4 in the house and dial this video up again. Starting at all midpoints 195 lbs and a short 6ft. Lets Ride!
Hey man, check under the right side 19mm hex cap for the air valve. Take the front wheel off first it’s easier to unscrew the cap. Under the cap is a Schraeder valve which inflates the damper side air bladder, these forks are actually a spring in oil fork. Spring is on left side w/preload adjustment and then the damper is on the right side. Think of the spring weight and preload as your initial/mid travel tuning and the air bladder as your mid/bottom tuning. You can get more into tuning by changing the wt of the fork oil but the air bladder lets us fine tune the amount of progression and bottom out resistance. It’s nice because it acts kind of like a progressive compression adjustment. My fork shipped at 85 psi from the factory which I felt was a little low so I bumped it up to 125 and the front end feels much better now. Luna said they recommend 100-125 depending on rider weight and how aggressively they ride. 👍🏼
Ah awesome! Okay I thought it was under that 19mm but it was super tight and I wanted to be sure before I loosened it. Thanks for writing that as well, very helpful! I’ll get a gauge on mine and see where it’s at. If I’m not mistaken isn’t the max recommended psi for this fork 150psi?
@@freerfixedit that’s what I thought as well, but I emailed Luna to double check and they said 100-125. You might be able to go up to 150 but I didn’t want to risk it at first.
@@spunkysandoval just to be totally clear. My comment is in regards to the latest Talaria Sting R with the updated factory fork purchased from Luna Cycles-not the factory fork you can buy aftermarket or on older stings. This new version doesn’t have a compression knob underneath the right leg (riders perspective) of the fork. Instead there’s a black 19mm hex that when unscrewed reveals an air valve that is used to fill up an air bladder in the damper. This lets you tune bottom out “compression”.
Just as one of the people said here already, you got the whole rebound thing wrong. The + means more rebound dampening and - means less. When you turn the rebound knob clockwise it pushes the rebound rod closer to the primary rebound oil channel thus making the channel smaller and restricting oil flow and in effect slowing down the rebound. This is how essentially rebound works on any fork...
Freer, I found out how to pump the Front shocks and rear shock. in the front remove the black hex bolts on the bottom of the forks, inside will be valve steam, use valve stem extenders to attach to pump, pump up to 150 PSI. the rear has it under the rear shock, idk if it nitrogen.
Thanks! Appreciate you and glad I can help! If you ever have a ? Or need anything, don’t hesitate to reach out in the comments. I try to reply to everyone!
Thanks for the vid, much needed info for me. Unfortunately, I think I snapped the air out bolt on the left side of front fork. I was letting the air out, then tightening it and barely put any force into it and now the bolt is spinning freely. Is it a big deal? I think that it is still airtight
Could try putting some teflon plumbers tape on there to give it some more bite in the threads. I know it’s a tiny screw and will be a pain in the ass, it worth a shot. Or maybe some liquid gasket idk. As long as it’s air tight
I have a ⁉️ question ⁉️ How to adjust seemingly crooked forks. I have the 2023 mx4 factory forks. Brand new only days old I believe my forks are off center to the right the ride doesn't feel stable hands off the bars and bike merges right fast 😨. To the eye its hard to tell. I'm running a wake adjustable stem for the moment, I do have a direct stem mount coming in the mail later today and that's going straight on. Hopefully that will fix the issue but if it doesn't and one of the fork tubes is off center or whatever I'm unsure how to figure which one and in what way.. Last night I loosen both crowns and did my best to straighten it out adjusted the stem it looks good rides a tiny bit better but still it's off. Sucks I can't really ride over 40mph 😅
That’s strange! I was gonna say see if the fork tubes are twisted slightly in the clamps but if you loosened the crowns and adjusted, they should be straight. Hopefully the direct mount stem helps! I just put mine on yesterday and I like it a lot
Hey bro, I just got my bike today and i cant seem to move my preload at all, the blue one. It just does maybe 2 turns and its really hard then just stops
A little bit late, but I want to lower the bike approx 2 inches - would I be able to achieve that by adjusting the suspension? From your video it sounds like adjusting pre load would be the best place to start. If I dropped it all the way down to 0, would it potentially damage my shocks?
It’s the rebound adjuster. I go over my settings on the rear at 09:10 , it just adjusts how fast or slow your suspension recoils after being compressed
So, they haven't started making switches with the square connector yet. What you can do is purchase the square connector here amzn.to/46juEe4 and re-pin the switch to the square connector. Heres a link to a good video showing how to do it ruclips.net/video/3A4DWnN9LcY/видео.html Looks pretty simple!
Luna sells an "upgraded" fork with a 50lb spring instead of the 30sonethjng that's in the stock fork. How does that change it? Does that seem like a good upgrade?
@@freerfixedit yeah it's a fast ace 2.0 but it has an option of a heavier spring. Comes with 30something unless you choose 50lb and there's a choice for 60lb
Thanks for the video! How much do you weigh and what's your height? Great questions to for a first date :) I got the new Sting R as well and my bike feels chunky
The newer Sting R's have pretty stiff suspension stock.. I'm only 150 pounds.... does anyone have any advice on how to soften it beyond these tips on here? Like, is there a decent aftermarket spring I could get for the rear?
@@freerfixedit I’ve been riding it for 6-7 months and this has only just happened.. I don’t know. It has like a tiny rebound but it doesn’t go all the way back and they feel stiff for some reason.
@@Adj.24 idk about the older style forks or their adjustments, but sounds like you’ve lost psi in the air side maybe. Can you see where the valve is to put air in the fork and put a pressure gauge on it to see what psi is in the forks currently?
@@freerfixedit At 8000 watts, do you really need more power??? Granted im only 155 lbs but I have never felt like I need more power with the R. You can switch the chain to non O ring, that helps a little. My bike goes 55mph. Climbs hills like a goat. Faster and lighter than my friends KLX 140. I guess if you switch to a more aggressive and wider tires, and you are a heavier rider, you might need more power.
Hey man, I recently left the military to go back to school so I had to sell my dirtbike. I kept my mountain bike but it gets no use and just discovered the surron and talaria hype, so now I'm strongly considering selling my mtb to get one. Do you have any regrets? Would you have bough any other bike knowing what you know now? Is there any mandatory mods you suggest or will I have a blast out of the box?
Got a Wr426f also collecting dust , cause iv'e got a Triple discus Prolaps ! Bern thinking bout a E- Downhill Bike .... But when 1000€ gets me a Talaria or surron.....No brainer😅
u def have to cut the limiter wire unless u wanna top out at 25 mph.. after I cut im hitting 50mph on flat.. also you def want to get wide pegs, and if you are a taller person you will find that bars with the 3" rise will feel a lot better.. oh and final mod you will appreciate after the install is the odi downhill plate, u can clean up the wires and run them behind the plate and it is significantly larger and much more heavy duty than the paper thin stocker
Sorry dude but you got that the wrong way around. In you ’unscrew’ the rebound to the -ve then you let less rebound dampening meaning it rebounds or returns quicker. +ve (dampening) or screwing it in means the rebound valve closes and it returns slower. Like the vid though. 👍
@@freerfixedit I'm riding my R with a 60 T, and in eco mode it is so gutless, even with the 60 T, it's a joke. So, sport has all the power, for sure, but I wish the eco mode wasn't so wimpy, there's a huge spread between eco and sport. When climbing steep scree I like a powerful eco, not a wheel spinning super touchy sport throttle. Former Sur Ron rider here, I liked it's spread (stock controller) between sport and eco better, so far.
at the time, it was cause my mic for the camera was in my helmet and I wanted good audio for the vid... it does seem to be a trend tho, and is quite cringe...
For anyone skimming through the comments... here's my current set up for someone who's 6'2" and 180 lbs. Hope this helps someone get on the right track.
Front
Preload (0-10): 4
Rebound (0-14): 9
Rear
Compression/Preload (0-20): 8
Rebound (0-18): 10
You are the same weight as me and I'm amazed you find the stock Talaria rear shock sufficient. I bottom mine out almost every time I use the bike, and as mine is an adapted road legal TL45 I've broken the number plate on the road and just now the plastic thing it fits to. :-(.
I'm wondering if you might have any advice? How comes yours is OK for you? I've already would the spring up a fair bit to try and sort out the problem.
thanks for that! im 6'2 about 195lbs soo u just might save me a lot of time haha
WoW school is out for summer. And proFessor Josh runs a suspension class,
thanks again for all the TIP & tricks for us late to the party riders.
Tomorrow at the crack of NooN I pull my MX4 in the house and dial this video up again.
Starting at all midpoints 195 lbs and a short 6ft.
Lets Ride!
Glad to help! Hope you enjoy your bike!! 🤙🏽🤙🏽
@@freerfixedit so feekon stoked to ride
on the contrary, the party's just getting started.
Hey man, check under the right side 19mm hex cap for the air valve. Take the front wheel off first it’s easier to unscrew the cap. Under the cap is a Schraeder valve which inflates the damper side air bladder, these forks are actually a spring in oil fork. Spring is on left side w/preload adjustment and then the damper is on the right side. Think of the spring weight and preload as your initial/mid travel tuning and the air bladder as your mid/bottom tuning. You can get more into tuning by changing the wt of the fork oil but the air bladder lets us fine tune the amount of progression and bottom out resistance. It’s nice because it acts kind of like a progressive compression adjustment. My fork shipped at 85 psi from the factory which I felt was a little low so I bumped it up to 125 and the front end feels much better now. Luna said they recommend 100-125 depending on rider weight and how aggressively they ride. 👍🏼
Ah awesome! Okay I thought it was under that 19mm but it was super tight and I wanted to be sure before I loosened it. Thanks for writing that as well, very helpful! I’ll get a gauge on mine and see where it’s at. If I’m not mistaken isn’t the max recommended psi for this fork 150psi?
@@freerfixedit that’s what I thought as well, but I emailed Luna to double check and they said 100-125. You might be able to go up to 150 but I didn’t want to risk it at first.
@@spunkysandoval that’s what I was afraid of… did you unscrew the right side like he said?
@@spunkysandoval just to be totally clear. My comment is in regards to the latest Talaria Sting R with the updated factory fork purchased from Luna Cycles-not the factory fork you can buy aftermarket or on older stings. This new version doesn’t have a compression knob underneath the right leg (riders perspective) of the fork. Instead there’s a black 19mm hex that when unscrewed reveals an air valve that is used to fill up an air bladder in the damper. This lets you tune bottom out “compression”.
Dnm forks use 150psi
Just as one of the people said here already, you got the whole rebound thing wrong. The + means more rebound dampening and - means less. When you turn the rebound knob clockwise it pushes the rebound rod closer to the primary rebound oil channel thus making the channel smaller and restricting oil flow and in effect slowing down the rebound. This is how essentially rebound works on any fork...
So this guy is an idiot
you are the best guy on youtube for Talaria videos. Thanks for all your good info .
Thanks for the kind words! Much appreciated! 🤝
Freer, I found out how to pump the Front shocks and rear shock. in the front remove the black hex bolts on the bottom of the forks, inside will be valve steam, use valve stem extenders to attach to pump, pump up to 150 PSI. the rear has it under the rear shock, idk if it nitrogen.
Doesn’t one side of the fork have oil in it? And the rear is nitrogen
yes. left is a spring, right is air and oil. rear is nitrogen.@@freerfixedit
Thank you !
This video deserve a lot more views! some really good job! thx a lot
Really appreciate the feedback! Glad it helped!
Great video
@@YouMotorcycle appreciate you! 🤝
Had no idea how it worked, thank you g
Happy to help! 🫡
thank you for this!
🎉 good videos - I like the explanations, tech, experience from riding 🎉 nice job
Thanks for the feedback! I appreciate it! 🤝
Good vid. Earned my sub.
@@ItsJustHenry appreciate you 🤝
Nice shock tutorial 👍 those shocks look identical to the new x talaria...
Thank you! I believe they are the same factory forks on both bikes!
brotha lookiing drippy, i can tell you're having fun with this youtube thing lmao
Haha thanks brother 😎🤙🏽
just watched your airsoft vids! good stuff man
U taught me alot here thanks!
🤝
This is a huge help to get my talaria suspension tuning setup for my fat a** 😂. Great info!
Thanks! Appreciate you and glad I can help! If you ever have a ? Or need anything, don’t hesitate to reach out in the comments. I try to reply to everyone!
Thanks for the vid, much needed info for me. Unfortunately, I think I snapped the air out bolt on the left side of front fork. I was letting the air out, then tightening it and barely put any force into it and now the bolt is spinning freely. Is it a big deal? I think that it is still airtight
Could try putting some teflon plumbers tape on there to give it some more bite in the threads. I know it’s a tiny screw and will be a pain in the ass, it worth a shot. Or maybe some liquid gasket idk. As long as it’s air tight
this is great 🔥
Thank you!!!!
I only have 12 clicks on my rear shocks rebound on my talaria sting mx4
Is it fast ace or talaria factory suspension?
Talaria factory suspension
Great vid❤
Thank you so much! Really appreciate that!
Good shit! Subscribed
Thank you, much appreciated! 🤝
Awesome bro, mine comes in tomorrow I’m just gonna use ur settings
Let me know how it feels compared to out of the box! Helped the rear shock a lot for me
I have a ⁉️ question ⁉️
How to adjust seemingly crooked forks. I have the 2023 mx4 factory forks. Brand new only days old
I believe my forks are off center to the right the ride doesn't feel stable hands off the bars and bike merges right fast 😨. To the eye its hard to tell. I'm running a wake adjustable stem for the moment, I do have a direct stem mount coming in the mail later today and that's going straight on. Hopefully that will fix the issue but if it doesn't and one of the fork tubes is off center or whatever I'm unsure how to figure which one and in what way..
Last night I loosen both crowns and did my best to straighten it out adjusted the stem it looks good rides a tiny bit better but still it's off. Sucks I can't really ride over 40mph 😅
That’s strange! I was gonna say see if the fork tubes are twisted slightly in the clamps but if you loosened the crowns and adjusted, they should be straight. Hopefully the direct mount stem helps! I just put mine on yesterday and I like it a lot
I only have the red and blue adjustments on the front of the bike. Where are they for the read that you’re talking about?
Top and bottom of rear shock should have red and blue adjustment as well!
Thank you 🤠
🤝
Hey bro, I just got my bike today and i cant seem to move my preload at all, the blue one. It just does maybe 2 turns and its really hard then just stops
both ways
nevermind i got it
A little bit late, but I want to lower the bike approx 2 inches - would I be able to achieve that by adjusting the suspension?
From your video it sounds like adjusting pre load would be the best place to start. If I dropped it all the way down to 0, would it potentially damage my shocks?
Good job...the content is good. Any plans for a Supermoto build?
I’ve got all the plans lol… I just don’t got all the money 🤣 slowly but surely I’m going to mod this thing to the moon
And thanks!
Good shit bro. Subscribed.
Appreciate that! Thanks! 🤙🏽
What about the red knob at the bottom of the rear shock
It’s the rebound adjuster. I go over my settings on the rear at 09:10 , it just adjusts how fast or slow your suspension recoils after being compressed
good video, how did you get the gritshift light on the mx4? im struggling because its a different connector
So, they haven't started making switches with the square connector yet. What you can do is purchase the square connector here amzn.to/46juEe4 and re-pin the switch to the square connector. Heres a link to a good video showing how to do it ruclips.net/video/3A4DWnN9LcY/видео.html Looks pretty simple!
@@freerfixedit Thankyou! Love the channel, extremely under rated wish you all the best in future 🙏🏽
Thanks for the video!
Thanks for watching!
Luna sells an "upgraded" fork with a 50lb spring instead of the 30sonethjng that's in the stock fork. How does that change it? Does that seem like a good upgrade?
@@BalanceOvOpposites I would go with the fast ace
@@freerfixedit yeah it's a fast ace 2.0 but it has an option of a heavier spring. Comes with 30something unless you choose 50lb and there's a choice for 60lb
@@BalanceOvOpposites look into the people the tune those forks. I’ve heard good things. The Luna upgrade is a good place to start tho
Thanks for the video! How much do you weigh and what's your height? Great questions to for a first date :) I got the new Sting R as well and my bike feels chunky
I’m 6’ bout 185lbs
@@freerfixedit Awesome! Same as me... Going to copy your adjustments and see how I like it 🤙
@@colbyleatham247 let me know! I like it for the bumpy rooted trails, but I may stiffen it up a bit once I start sending bigger jumps
The newer Sting R's have pretty stiff suspension stock.. I'm only 150 pounds.... does anyone have any advice on how to soften it beyond these tips on here? Like, is there a decent aftermarket spring I could get for the rear?
can u air pump up the front fork to setup suspension on the front??
Yes, I’ve been told it’s on the bottom side of the right fork leg, under the 19mm cap
My forks won’t rebound they just stay down.? Unless I physically pull them up
Somethings not right… we’re they doing that out of the box or did you change the settings?
@@freerfixedit I’ve been riding it for 6-7 months and this has only just happened.. I don’t know. It has like a tiny rebound but it doesn’t go all the way back and they feel stiff for some reason.
@@Adj.24 idk about the older style forks or their adjustments, but sounds like you’ve lost psi in the air side maybe. Can you see where the valve is to put air in the fork and put a pressure gauge on it to see what psi is in the forks currently?
Good vid, but left, right? Why not clock and counter clock wise next time, to indicate rotation?!
Nigga shatup and make your own video then
What about the little blue knob on the bottom of the front right fork?
I don’t have one. I’ve seen photos of what you’re referring to, but the bottom of both fork legs have a 19mm hex cap
@@freerfixedit any idea what it does?
@@Smilldon I don’t. Might say on the adjuster, but I’ve only ever seen it in photos of the aftermarket talaria “factory forks” you can purchase online
I have 18 clicks of adjustment on my rebound
Left is actually Lucy
Good stuff.
Appreciate it!
Thanksman
🤝
What power upgrades would you put on your talaria sting r
If money were no issue I’d like to get a bac 4000 controller and a 72v battery
@@freerfixedit At 8000 watts, do you really need more power??? Granted im only 155 lbs but I have never felt like I need more power with the R. You can switch the chain to non O ring, that helps a little. My bike goes 55mph. Climbs hills like a goat. Faster and lighter than my friends KLX 140. I guess if you switch to a more aggressive and wider tires, and you are a heavier rider, you might need more power.
@@AdventureContinuesAgainAlways need more power.
We are same same but different
Hey man, I recently left the military to go back to school so I had to sell my dirtbike. I kept my mountain bike but it gets no use and just discovered the surron and talaria hype, so now I'm strongly considering selling my mtb to get one. Do you have any regrets? Would you have bough any other bike knowing what you know now? Is there any mandatory mods you suggest or will I have a blast out of the box?
Bro sell the mtn bike and do it. I have a 22 crf 450 in the garage collecting dust cause all I do is ride this now 😂 zero regret!
The stock pegs are garbage, and get the shimano brake pads. Really all I’ve done to it in a month
Got a Wr426f also collecting dust , cause iv'e got a Triple discus Prolaps ! Bern thinking bout a E- Downhill Bike .... But when 1000€ gets me a Talaria or surron.....No brainer😅
u def have to cut the limiter wire unless u wanna top out at 25 mph.. after I cut im hitting 50mph on flat.. also you def want to get wide pegs, and if you are a taller person you will find that bars with the 3" rise will feel a lot better..
oh and final mod you will appreciate after the install is the odi downhill plate, u can clean up the wires and run them behind the plate and it is significantly larger and much more heavy duty than the paper thin stocker
Talaria sting r mx4 is value for money, out of the box, 😊😊😊😊 ever increasing popularity comes standard with upgrades the surron does not have
Why do you have it torn down?
Thanks now let’s ridee
🤙🏽🤝
Im 240 pounds 6 foot so im just gonna copy your setup tbh and see how it feels
just copied them it feels good
@@realkidcarter happy to hear it 🤙🏽
@@freerfixedit Just got back about an hour ago, feels pretty mint. I was sending some pretty big jumps and it was alright
Just got my talaria and my preload knob is not turning. It is super tight and I can’t seem to twist it with grip strength. Am I doing something wrong?
Yes
Are you suronster?
🤷🏻♂️
Sorry dude but you got that the wrong way around. In you ’unscrew’ the rebound to the -ve then you let less rebound dampening meaning it rebounds or returns quicker. +ve (dampening) or screwing it in means the rebound valve closes and it returns slower. Like the vid though. 👍
Well, in this case, I moved the adjustment heavily in the “-“ direction and it slowed the rebound and gave me the effect I was looking for
You are correct. Counterclockwise will speed up your rebound abs going all the way in will slow it down.
Wait now I am totally confused.... slower rebound is clockwise?
Get a marker man . After all that effort fook a marker let u down .
He say lucifer? Lol wth
😂 just go with it
So if you could start over would you buy another sting? Lol
@@beyourself4450 yeah I would. No regrets so far
@@freerfixedit I'm riding my R with a 60 T, and in eco mode it is so gutless, even with the 60 T, it's a joke. So, sport has all the power, for sure, but I wish the eco mode wasn't so wimpy, there's a huge spread between eco and sport. When climbing steep scree I like a powerful eco, not a wheel spinning super touchy sport throttle. Former Sur Ron rider here, I liked it's spread (stock controller) between sport and eco better, so far.
Can you do a better explanation without using the board? Just use the bike can’t really see what you’re drawing.
😡 P R O M O S M
What is it with all you ebike guys who surronster your videos with helmets. Kind of goofy
at the time, it was cause my mic for the camera was in my helmet and I wanted good audio for the vid... it does seem to be a trend tho, and is quite cringe...
lame
Thanks!
Autism
why do surron ppl hidew their gay faces