I changed the front shock absorbers today, thanks to your video. I made a modified 18 mm offset star wrench like you did, otherwise it would've been impossible to do it at home without an impact gun. Thanks for your video an explanations.
Different subject... Need to add a cable for the electrical heater in the cupe' and I can not find any suitable hole for it from engine compartment to interior. I have done this on my old volvo cars and on an old Ford and it was no problem due to cables from engine going through the "firewall" clearly visable. I can not find any holes on my MY 2012 Colt. Do you have any advise for me? I have no problem drilling a new hole but I would like to use an excisting hole. All my best.
Thanks to this video I will save much time in changing the springs and dampers on my old Colt. Thank you "Boomer" :) Bästa filmen jag sett gällande detta jobb :)
Hi, I am in Australia, and all of our colt struts are different, Can you please tell me what make and model colt this is? I am having trouble with my springs and shocks being different sizes.
Thank you for this informative video. I have raised the clearence of my Colt for 3cm by adding spacers on the tops of suspensions. However, now when I start tu turn steering wheel from the right edge to left, it makes a clunking sound at the start, as if some metal is not aligned properly in the suspension. Do you know what can it be? And is it safe to drive?
Добрый день! Отличное видео, содержательное, все по делу и грамотный музон! Автор, подскажи, не менял ли опорники и если да, какие ставил. Ещё не было ли проблем с уплотнительной резинкой внутри опорной чашки.
I changed the front shock absorbers today, thanks to your video. I made a modified 18 mm offset star wrench like you did, otherwise it would've been impossible to do it at home without an impact gun. Thanks for your video an explanations.
Followed this today and changed my front offside shock, many thanks excellant video and great instructions
The little bracket holding the brake hose onto the strut has an E-TORX head. Needs a good wire-brushing and penetrating oil. Can be very stubborn.
Спасибо за видео, всё видно и всё по делу! Даже напомнили как стойку перебирать!👍
Thanks for posting this video, exactly what i needed to get the job done.
Different subject...
Need to add a cable for the electrical heater in the cupe' and I can not find any suitable hole for it from engine compartment to interior. I have done this on my old volvo cars and on an old Ford and it was no problem due to cables from engine going through the "firewall" clearly visable. I can not find any holes on my MY 2012 Colt. Do you have any advise for me? I have no problem drilling a new hole but I would like to use an excisting hole. All my best.
Thanks to this video I will save much time in changing the springs and dampers on my old Colt. Thank you "Boomer" :)
Bästa filmen jag sett gällande detta jobb :)
Hi, I am in Australia, and all of our colt struts are different, Can you please tell me what make and model colt this is? I am having trouble with my springs and shocks being different sizes.
thaank you very much... its exactlu the same for Smart Forfour 454 (2004-2006)
Hello,thank you for your tuto.i have to do on my car soon. can you tell me what is the size of the angled wrench for the top?
Thank you for this informative video. I have raised the clearence of my Colt for 3cm by adding spacers on the tops of suspensions. However, now when I start tu turn steering wheel from the right edge to left, it makes a clunking sound at the start, as if some metal is not aligned properly in the suspension. Do you know what can it be? And is it safe to drive?
Опорные надо промывать и смазывать, чтобы пружины при поворотах руля не дрызгали.
Thanks a millon for upload, just the info I needed
change smart forfour shock absorbers
Добрый день! Отличное видео, содержательное, все по делу и грамотный музон! Автор, подскажи, не менял ли опорники и если да, какие ставил. Ещё не было ли проблем с уплотнительной резинкой внутри опорной чашки.
Are the shock absorbers the same on the different versions (1.3, 1.5 turbo, etc)?
Hello, i have a question please,do you know where the petrol filter is located? Thanks
In the tank on pump
@@boomergarage thank you very much sir
Do you know how to make it softer?
Hangi marka amortisör taktınız
Tanks
thank you. This video would be useful on how to get to EGR valve in colt.
In my 1.5 colt no EGR
Накидной ключ на 17/19 или 19/22?
18, если вы про гайку штока
@@boomergarage спасибо вам большое, всё норм!!!
Добрый день! Нужен совет, вы меняли рулевые наконечники, если да то какие?
@@pavelandreew6839 здравствуйте, прошлым летом я поставил такой SIDEM 71233 .
@@boomergarage спасибо большое!
Dzięki za info