Logitech G304/G305 Switch Replacement + Tiger Arc Ice Glide Feet (ASMR No Talking)
HTML-код
- Опубликовано: 26 июн 2021
- ►Turn On Caption for a detailed explanation!
►Logitech G305 is one of the cheapest and reliable mouse for gaming, browsing, or basically, everything. (at least for me.
After using it for a year, finally, my switch is broken. It's time to it to another kind of switch. I don't say Omron Switch is bad. But it has the same problem all over the internet, double clicks.
This time I'm using TTC Switch 80M. My first impression is this switch quite fancy and it has a dustproof feature which I can't say if it works right now. Let the time tell.
For you who come here to repair your mouse, I hope this video will help, and good luck!
Thanks for watching!
►Tiger Arc Ice Glide for G304 : www.tokopedia.com/chemicygami...
►TTC Gold 80M Switch : www.tokopedia.com/nvlogic/mic...
►Support my channel!
/ @adimology
--------------------------------------------------------------------------------------------------
📷 Instagram: / adimology
📧 Bisnis / Sponsor / Endorse : playwithadim@gmail.com
🔥 Dukung melalui Saweria : saweria.co/adimology
📸 Camera Equipment :
Main Camera : Sony A6400
Wide Lens : Sigma 16mm f1.4
Tele lens : Sony G PZ18-105mm F4
External Monitor : Feelworld F6
Main Light : Godox SL60W
Fill Light : Godox LEDP120C / Aputure H528S
Stabilizer : Zhiyun Crane V1
Phone Stabilizer : Zhiyun Smooth 4
Microphone : Rode Video Micro
💻 PC & Streaming Equipment :
Gaming Monitor : LG GL600F 144Hz
Editing Monitor : Dell U2417H
Processor : Intel i5 8600K
Motherboard : MSI Z370M Gaming Pro AC
GPU : MSI RTX 2070 Armor
RAM : Team Elite 2x16GB
SSD : Samsung 960 EVO 500GB NVME
CPU Cooler : Thermaltake Water 3.0
PSU : Corsair HX850i
Audio Interface : Yamaha AG06
Headphone : Audio Technica AT-M50X
Microphone : AKG D5
Keyboard : Logitech GPro
Mouse : Logitech G304
Webcam : Logitech C922 Pro Stream
Capture Card : Elgato HD60Pro
Case : Thermaltake View 21
Case Fan : Aigoo RGB
#Logitech #G305 #ASMR 
Хобби
🛒 Buy from :
►Logitech G305 Aliexpress : invol.co/clfm7tz
►Logitech G305 (Amazon Affiliate Link) : amzn.to/39zbkgI
Aliexpress Int'l :
►Tiger Gaming Mouse Feet : invol.co/clfm7sq
►Kailh GM Black Switches : invol.co/clfm7t8
►TTC Gold Switch: invol.co/clfm7tg
Indonesia :
►Tiger Arc Ice Glide for G304 : www.tokopedia.com/chemicygaming/tiger-arc-ice-edition-gaming-mouse-feet-hyperglide-hyperglides-g403
►TTC Gold 80M Switch : www.tokopedia.com/nvlogic/micro-switch-mouse-ttc-gold-dustproof-80m
Link tokped nya broken bang
Thanks to your guide i finally decided to change the switch on my g304 after 1 year of abandoning the mouse due to double click. Anoyone following this guide please note that the factory solder is not a lead solder and thus takes high temperature and much more effort to desolder the faulty switches.
When a mouse gets shiny from use, it means it is a really good one.
agree!
Nope, it wears out faster when you have sweaty hands hahaha
Or cheap ABS plastic.
THis is an awesome video. My back button has been broken for years but now the left click is also broken. I'm going to order some switches using your links, thank you.
Just a heads up for anyone else who doesn't want to get into soldering--ebay actually has the switches pre-mounted on their little boards with the wire that connects directly to the mainboard. You can choose from a variety of switches--I got the TTC 80M's, and managed to swap out my old switches with no soldering required. The kit even comes with a set of mouse feet, so it has everything you need to do this swap. It cost $10 and I'm very happy with it.
What exactly did you search for on Ebay for those switches? Could you maybe provide a link as well?
Thank you, it was very clear and helpful! Though I don't know how you put the button back in so easily, took me ages, it kept getting stuck.
When you reinstall the mouse, did the left click and right click a bit higher in height compared to the factory fabrication?
I upgraded mine aswell, mainly because of doubleclick issue. Now I got huano transparent blue shell pink dot switches and they feel great! I also replaced the feet and custom spray painted it, looks like a new one!
i use this same model mouse since 2018 and it's still in good condition. I play valorant and rainbow six siege and i can say this mouse do a pretty good job. it's inexpensive and the best mouse i ever had. for those who has small hand, and looking for inexpensive mouse, this mouse is the best choice. (honest review)
thank you for this video. this helped me to be my guide in changing the switch of my g304
Thanks for uploading this video. The switches on my G304 just gave out after roughly 3 years of usage. Thanks to this video, I'm not going in blind once the switches I've ordered (Kailh GM Red) arrive by next week.
wow 3 years is remarkable! mine only take one year 😅
Goodluck with yours!
What do you expect for a $40 mouse. To live forever.
@@jacksonblack2776 where did he complained about it being bad. Also logitech mouse have shitty omron switches give out in under few months
Thanks a lot for the tutorial. After some 3 years of constant use my trusty g305 started to chatter big time. With your help I replaced the switches and pads in 30 minutes.
glad it helps 💪🏻
Thanks for made this video, just what i needed in current situation :D
I have the white version of this mouse and I just soldered on some new silent switches but I cannot put the "covers" (the white plastic parts, left and right) back on. They just don't fit lol. Idk if I bent both of them when I was taking them out or what. Yours and many others' I've seen on yt, just slide right in and then click in. Hmmm
Thank you for the documentation! This is very helpful!
How do you put the left and right plastic part back together cuz I have just opened my mouse lol
thank you for your video. I'm struggle on how to remove switch from leaf cover. Very helpful!
Glad it helped!
Thank you for this video! I was able to clean my mouse and properly attach the loose left click button :D
Glad I could help!
Hi is there a silent switch replacement for the g304?
What's the size of the philip screwdriver that u use? Thanks 🙏
I used the same TTC Gold 80M, it's pretty good while also feels quite similar with the Omron switchs
Omron 80m made in japan much better, not made in china
thanks bro, sangat membantu, pake tutorial ini aku sukses ganti switch yang dobel klik, pahala jariyah yang mengalir trs dan sukses selalu
alhamdulillah terima kasih doanya 🙏
hey bro i got an idea ,,i bought the g 305 some days ago and now i want rgb in it....i am thinking of adding rgb lights from g 102 lightsync to g305
would have liked to see how u managed to remove the cables glued to the frame and how to take out the switches after loosening them with the tweezers. Im having a lot of difficulty with those at the moment.
damn, what an awesome guide man; straight to disassembly, along with cc-ed explanation, the video quality is sharp, overall just a 5/5 video imo.. thanks for helping me disassemble mine!
great video, thank you it was very helpful.
thank you so much for this :) you helped me a lot!
Thx, your guide is very useful. I can replace the switch
what size of screw did you use?
Thanks for taking the time to make this video, it really helped!
🔥🔥
bang boleh bagi link pembelian batrai + converter nya buat mouse g304 ini
So professional and delicate! :)
Thank you! 😊
Thank you so much. This is very helpful.😁
Glad it was helpful!
my light is not working...( i rage sometimes ) how to fix it?
just replaced my g203 switch to kailh switch few days ago after abbandoned it for months due to double click issue, feel awsome man im gonna replace my g304 next week
good luck!
@@adimology does they use the same scroll wheel encoder?
my left click button is stiff can u help me with that?
Can you tell me the measurements of each screw?
where u bought the battery?
Makasih banyak bro. Mau ganti switch sendiri tapi ternyata harus nyolder ya. Terakhir nyolder kayanya 20 tahun lalu, harus belajar lagi 😆
tinggal bawa ke tempat servis hp mas, bentar juga kelar sama mereka ginian mah hehe
if you try modding g305 it don´t gonna work because it detect the mod and the programate obsolescence start
very well made video !!
thanks a lot man
thanks!
Thank you for the video but what was the Blue and Yellow tool that snaps ? what does it do exactly ? Because I only have the soldering iron.
solder tin sucker
Hey, just want to say thanks for this video. My switch is really dirty and hard to click. Fortunately a simple cleaning fix it. Cheers!
hi, glad it helps! thanks for leaving a good comment 🙏
just ordered the switches. wish me luck
Is the middle button (the one behind the scroll wheel) removable? Or is it a part of the battery housing? Do you know if I can sand it down to make it more low profile? I keep accidentally hitting it. Or would sanding it expose hollowness?
It's a part of the battery as you can see in 6:41
I don't know if it's hollow or solid plastic if you sand it down but I assume it's a solid piece... if you keep hitting it accidentally, you can disable it in the software..
Thanks for your reply
I have the same mouse but for me its the middle mouse button click that doesn't work at all, its a smaller square shaped switch. Would you happen to know what replacement switch would work for it?
push button micro switch cmiiw
thx for the vid. now i gonna fix my double click issue
🔥
Bang itu batrenya dipakain apa? Kok ada karetnya
Hello sir, can you link the soldering tool you used and how much wattage should I buy for fixing mice??
i use 60w soldering iron.. any brand will do 😉
Gila sih ini ilmu banget, ngapain gua dulu gonta-ganti mouse yak, kan bisa ganti, thanks 🤣🤣
yah kalo ada rejeki ganti2 gpp juga 😁😁😁
👍👍👍
does anyone know the function of the little thing at 4:58?
a question what is the screw tip size im having trouble of fitting screw driver
in a hardware store usually you will find three different size of philips screwdriver.. choose the smallest one
PH #00
I fucked up the trails. That's all you guys need to know.
Great video btw!
Nice video
nice video bro :)
are the side buttons use the same switch as main button? mine 304 side buttons both not working
yes it uses a same switch type
@@adimology thanks man. I love this mouse..
Hi, my G304 powered off & on while power button slided to blue (on). What might be the problem?
bisa terminal baterai nya kurang nempel (mesti di congkel terminalnya biar lebih ngedorong batere)
bisa konektor kabel ke board nya kendor
@@adimology jadi perlu dibongkar ke dalem ya? seminggu beli perlu jatuh langsung begitu sih memang.
@Kevin Handoko dicoba aja dulu bagian baterenya di congkel atau ditambahain material bair bateranya bisa lebih "dalam".. kalo ga bisa otomatis mesti bongkar untuk ngecek apakah koneksinya kendor
may I know what are the items in 8:16 like a white wire and burning item
the wire is a soldering wire (tin) and the burning item is a solder..
Do the side buttons have the same switches as the main switches? I'm planning to replace my side buttons because they keep double clicking
yes it is
@@adimology Hi, again. I just replaced my switches and my rmb and lmb are now uneven. Do you know what's the issue?
@@ren7185 probably because when you soldered the switch, it's not pushed enough until the bottom of the switch touch evenly on the pcb.. you have to resolder it and make sure it's even
@@adimology thanks for the reply! will do
Damn, i did all this and then, when i tried turn on the mouse, it didnt work. I had put the internal white battery connector pin backwards. What a fright...
Bang kalo mouse feet nya ganti yang agak gede bisa ga ya? Gsuperlight atau g403
ga bisa
great video! I'm kind of surprised to see the mouse has this many parts for one thats seemingly so simple
do you think the new switches will last longer? I'd also love to hear your opinions on the feel of the glides(and if its necessary to replace the original glides after taking them off)
most of ttc/kailh switches has a good lifespan.. but who knows? it's just a "switch" like the one you use to turn the light on and off in your house 😁
the glides is depends! for me it's speed over control so I really love the new glides better
@@adimology How is the durability of the new switches after a few months?
Keren videonya, makasih ilmunya, mouse saya juga udah ngaco klik kirinya, karet wheelnya juga udah kendor, ganti pake plastik PLA 3d print replacementnya kemahalan soalnya. Mau nanya, alat yang di tangan kiri waktu desoldering itu apa ya, fungsinya apa ? (7:20) Barakallahu fiik.
buat nyedot timah ketika timahnya cair
I replaced the left and right keys of my G305 mouse with silent buttons. Everything was fine, but now the weight of my fingers causes them to press the keys by themselves while using the mouse. I take care not to press the keys and this is tiring.Is there a solution to this?
the switch that you used is too light... if you still want to use a silent switch, search a heavier switch (which is dont know because I never use a silent switch for my mouse..)
What switch did you use?
om ttc gold sama switch bawaan logitech forcenya lebih enteng mana
enteng bawaan
Help me pls! My LBM is a bit higher than it has to be, so it’s a bit harder to click, what should I do?
resolder and push the switch while soldering
@@adimology thank u!!!!
Bang kalo hold left click agak bermasalah itu switchnya harus diganti yah? Gabisa spray gun kadang macet 😅
yap salah satu cirinya gitu..
if i have double click issue, can it be solved by replacing the switch like you did in the video?
yes, the problem is the switch itself.. so if your switch is double clicking or just not responding as I show you in this video, you only have to change the switch.. goodluck
@@adimology ouh thanks for the video. Btw will kailh GM 4.0 switch fit G304?
yes it will fit. You can browse for the sound and fell of the switch in youtube anyway, choose one you feel better in sound and what they said about the feel before you buy..
Hey mate. I bought this mouse since 2 months and im experiencing double clicks. What to do? Maybe should i open mouse and clean it inside or switching switches will fix?
try to blow an air between the button.. if it's still persist, try change the switch.. or.. claim your warranty
@@adimology changing the switch will fix it?
DPI problem, interior cable location and 4 loosely tightened closing screws
DPI problema, ubicacion cables interior y 4 tornillos de cerrado poco apretados
Makasih bang videonya ntar saya bawa ke tukang servis hp aja sekalian suruh nonton ini video, gabisa nyolder gw. Untuk durabilitasnya bisa tahan berapa lama bang switchnya? Saya yg bawaan sekitar 2th lebih double klik.
hmm dr video itu dibuat sampe skrng masih bagus kok.. feel nya jg lebih enak.. iya kalo ga bisa bawa ke tukang servis aja..
My right click switch stopped working. So I made the order. But the soldering station came 1 day earlier. So I decided to play around and undo switches today and soldier down new ones tomorrow. I ended up switching the old switches places. And what do you think? The broken right switch started to work xD
it's just a temporary fix.. like a TV remote when the battery dies :D
just change it and you will be fine for another year :)
@@adimology I ordered 60kk clicks one. Or this switch fails is not a switch problem?
it's the switch. maybe the dust in it, maybe the contact is loose from time to time. when you played with it, maybe it's solved the problem inside but it's temporary..
@@adimology uh... Back I a day. My 5 years old mx518 was as good as 1 day of use....
@@KyryllHaponenko ask logitech why :)
sukses ya, adimology
aaminnn
My both side buttons are not working properly it only works after 2 to 4 clicks simultaneously & its annoying. Plz help
it's the same process and switches but instead of changing left right button, you have to change the side buttons switches
@@adimology Thank you
Im goin to do this but with kalih gm 8.0 and tiger arc, what do you think of this?, also what an amazing video
kailh gm8.0 is the best (for me at least!)
if I have to choose now, i prefer 8.0 😉
@@adimology bang kira2 TTC bakal lebih awet ga yah? karena punya filter debu sedangkan Kailh g ada
kalo ga suka ngerokok sih ga ngaruh2 amat kok
bang mohon info duo switch-nya tipe apa dan apakah ada yang jual di e-commerce indonesia
Thanks
lah kan ada di deskripsinya udah ditulis
@@adimology siap.. maaf terlalu semangat 😁
bang switch mouse yang ringan paling recommend apa ya
kayaknya saya belum kompeten deh untuk ngasih saran switch mouse, soalnya baru switch ini dan originalnya aja yg dicoba.. coba dicek2 aja di youtube kalo ga salah ada yg buat video komparasi switchnya
all this videos about faulty switches are with logitech mouses
ive had the stock omron for my g304 bought it around mid 2020 n now around april the double click issue start appearing so the factory one is kinda good ive been playing fps game alot im surprised it handle all those for 3 years so now im gonna change it witht he same exact brand but is 10m click more than the stock..... thx for the video i was kinda afraid if i gonna screw it up or broke it
Goodluck!
It's not about the click rating. It's the incorrect voltages. Modern wireless mice switches only requires a tiny voltage compared to wired mice but they stuck switches from those wired mice into this. The result is they fail after a few years while the wired counterpart G203 will work just fine.
The trick is to get the right switches with the correct voltage rating like the one in the video.
@@nevmiku so i opened up my g304 n search up the brand n model of the switch online n the pic is same as the stock one in my g304 but it (20m) instead of 10m is dat also meant different voltage even though the model is same number
@@kuronekogaming5126 If the model number is the same then they should still be at the wrong voltages. Also, does it matter whether it's the same when the double clicking already develops and you'll need to replace them with new switches anyway?
Damn! The Unsoldering and Soldering is faster than I thought it would be. At 7:18, what tool did you used? (The loud click sound)
solder sucker..
Om mau tanya buat Scroll Button Switchnya apa om tau keyword yang tepat buat nyari di toko hijau?
Terima kasih
yg scroll kalo ga salah micro switch.. di good gaming shop kayanya ada..
@@adimology Noted Om, soalnya mau ganti juga 😂 setelah 3 tahun pake. Tapi engga ada kendala double click sih, cuma setelah liat video ini rasa pengen ganti STONKS
biasanya setelah ganti jadi suggest kan.. efek nya aim naik lah haha.. Goodluck
kalo untuk atasi grip karet mousenya yang aus gmna bang
kagak ada 😂 paling beli griptape universal
very complex structures. sht
My left click is really loose so when i rest my finger on it it clicks without me putting pressure how do i fix it
this video
change medium hardness switch such as Huano.
Don't be fooled, the hardest part is not the soldering, but screwing them back. Especially if you dont have magneted screwdriver. Spent an hour doing this and its sill not in yet ..
😂
@@adimology Dude I gave up, I left 2 screws unscrewed. May I have the link to your screwdriver? Tokopedia preferred 😭😭
Thank You
This video makes me confident to not buy g305 😂
Different construction from g102 (switch easier to replace)
It's really not that bad, I had it replaced in half an hour or so with one that included the PCB attached on Amazon. Replaced it with TTC gold 80M.
@@NoThisIsPatrick. too much hassle, i just bought a razer viper mini instead.
bang adi, di menit 5:05 nama komponennya apa ya? ada yg jual tdk ya?
mohon dijawab bang 🙏🙏
kalo nyalain cc pasti bisa tau itu namanya apa..
kalo baca deskripsi juga tertera link pembeliannya..
does any one know what kind and size the switch for the scroll wheel click?
the one popular right now is ttc encoder
@@adimology thank you for the reply but I was more wondering about dimensions so I could order there are so many size options you see and I couldn't figure out what fits
10mm mouse scroll wheel encoder
@@adimologythanks again but how about the scroll wheel button? What size micro switch is it?
Bang ngebuka mouseglide itu ngerusak glidenya ya?
yup
Please work on your angles and focusing when you're soldering. All we can see is your hand, which is not very useful
The easiest way to remove the feet is to use it daily for about a year. By then they'll just fall off.
How does your shell not have the logo
sweat
Bang, katanya ttc gold yg 60m sama 80m beda feelnya. Bener gak itu?
bener.. dan itu tergantung orangnya suka yg mana.. tapi klo ditanya skrng milih apa? kailh gm 8.0
@@adimology kailh gm 8.0 vs ttc gold feelnya enakan yg mana? Perbedaannya apa aja.
susah dijelasinnya, harus coba sendiri sih.. beli aja keduanya cuma 20rban kok, kalo suka salah satu jadiin main switch, yg ga suka bisa dipindah ke side button
harus pake solder kah bang,atau bisa pake cara lain ?
harus... karena kan ada timahnya.. kalo agak susah bisa dibawa ke tukang servis hp biasanya mereka punya alatnya dan udah pasti bisa.. tinggal kasih tau aja video ini ntar mereka bisa ikutin..
@@adimology oke terimakasih bang buat saranya,sangat membantu sekali
what will happen if I didnt solder it?
it'll fall
@@adimology did you see that the board can change to a swappable one?
Ada perbedaan ga setelah ganti feet nya?
lebih licin
I need to solder the switches? I'd rather buy a new mouse now. Thanks for the video though.
😂
Numpang nonton lord 😂
asik ga?
Asik , kalo lebih sensitif lebih asik lagi itu pak kayaknya 😂 cuma rawan bocor suara dari luar
ukuran berapa obeng nya PH 00 ?
PH 0 sama PH 00