How to troubleshoot issues with Fortigate Firewall?

Поделиться
HTML-код
  • Опубликовано: 24 июл 2024
  • This session will help you understand the most used debug tools used in Fortigate Firewall and how to use them to quickly pinpoint and fix the issues in your organization on daily basis.
    Also just to add
    To troubleshoot connectivity issues on a Fortigate firewall, you can try the following steps:
    Check the status of the physical interfaces on the FortiGate unit to ensure that they are up and that there is an active link.
    Verify that the correct IP addressing and subnet mask have been configured on the interfaces.
    Check the routing table to ensure that the correct next-hop IP address is configured for the destination network.
    Verify that the firewall policies are configured correctly and are not blocking the traffic.
    Check for any link aggregation or VLAN configuration issues.
    Ensure that the default gateway has been configured on the FortiGate unit.
    Check for any ACLs or other security features blocking the traffic.
    Check the FortiGate system logs for any error messages or warning messages that may indicate the source of the problem.
    Check for any MTU issues on the network interfaces
    If the issue persists, try to reboot the FortiGate unit and check if the problem still exists.
    Please let me know if you need more information. To become a Fortigate Subject Matter expert, visit rakshitvidyarthi.com/
    Getting NSE4/5/7 is just an outcome! Or you can connect over call/WhatsApp at +91 8882199074

Комментарии • 16

  • @Shubhontube
    @Shubhontube Год назад

    ONE OF THE BEST COURSES I FOUND FOR FORTIGATE IS OF RAKSHIT SIR, WITH EXCEPTIONAL TRAINING AND GUIDANCE ANYTIME. TRULY MADE A SIGNIFICANT IMPACT ON MY UNDERSTANDING IN FortiGate. PRIOR TO DISCOVERING YOUR RUclips VIDEO, I WAS STRUGGLING TO FIND A SUITABLE COURSE THAT WOULD EFFECTIVELY COVER ALL ASPECTS OF THE PRODUCT.
    FROM THE MOMENT I WATCHED YOUR VIDEO I WAS CONVINCED THAT THE TEACHING STYLE AND DEPTH OF KNOWLEDGE ARE EXACTLY WHAT I NEEDED TO SUCCEED IN MASTERING FORTIGATE. MOREOVER, YOUR SUPPORT AND WILLINGNESS TO GO TO EXTRA MILE FOR US "YOUR STUDENT" HAVE LEFT A LASTING IMPRESSION ON ME. ONCE AGAIN THANKYOU RAKSHIT SIR
    🙂

  • @stabil1978
    @stabil1978 Год назад

    Thank you. You explain the "why" not only the "how".

  • @rahulkushwah9022
    @rahulkushwah9022 Год назад +1

    very knowledgeable video expecting a lot more to come thanks.

  • @mantid83
    @mantid83 8 месяцев назад

    Saving this for later. Thank you@

  • @nedatula2974
    @nedatula2974 6 месяцев назад

    Great . Thank you.

  • @Nawaz7861
    @Nawaz7861 9 месяцев назад

    This is very good information which we hardly find on RUclips. Would you be able to share the document that is show in the video.

  • @dpk_why
    @dpk_why Год назад +1

    Nice

  • @sanglikarsantoshnikam8909
    @sanglikarsantoshnikam8909 6 месяцев назад

    as you say at one point cisco asa is stateless firewall is that correct??

  • @rostandnomegne252
    @rostandnomegne252 Год назад

    I am able to ping pc1 from pc2 and vice versa...but the diag packet sniffer any "icmp" still shows "echo request only", is there a reason for it ?

    • @rakshitvidyarthi
      @rakshitvidyarthi  Год назад

      at times, the lab can also show weird behavior with evaluation license. Please try to wipe pc1,2 and the fortigate firewall and try again. Let me know how it goes. All the best!
      👍

    • @rosatechnocrat
      @rosatechnocrat Год назад

      Also if you have offloading enabled in policy in case physical firewall model , then also packet may not show and you have to disable NPU offloading.

    • @umeshprajapati7546
      @umeshprajapati7546 Год назад

      How can I join your Fortigate lecture.

  • @user-ep2mm3ds3x
    @user-ep2mm3ds3x Год назад

    hye

  • @user-ep2mm3ds3x
    @user-ep2mm3ds3x Год назад

    hello