How to adjust timing chain on Renault KOLEOS/Nissan QASHQAI 2.0 dci-NO SPECIAL TIMING TOOLS NEEDED

#timingchainadjustment #NOSPECIALTOOLS #2.0DCI🚗🛠
This video is about how you can adjust the timing chain on Renault Koleos and Nissan Qasqai 2.0 l diesel engine with no special tools.
Sunrise by SKIRK / skirkofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2Sg2SNU
Music promoted by Audio Library • Sunrise - SKIRK (No Co...

[@Romeo_STO]

Ваше видео натолкнуло на мысль как установить грм на m9t при помощи штанген цируля и без фиксаторов.Все успешно получилось.Удачи Вам.

[@joeroberts1862]

Camshaft sprocket fitted the wrong way round and bolt plate not fitted 🤦

[@stevenmckinlay4478]

Right side guide is wrong way round. White mark should be at top. Perfect video though. Many thanks

[@PoprostuRuter]

Hi
I have small question. That bigger sprocket with bean holes on exhaust camshaft you must align it before tightening bolts to TDC or what? What if I misaligned them a bit?

[@noelhession8330]

You forgot the thrust washer on the cam shaft . Did you lock the crank ?

[@nesport3751]

Great video, many thanks for making a video of replacing the timming chain, it's the same motor for Opel movano B van RWD 2.3 cdti 125 hp year 2010.😉😁

[@strongdiesel7912]

Thx for the comment 👍 and thx for the tip

[@stevenmckinlay4478]

Also the crank needs timed, as the timing sprocket bolts should not be so far to the led for right.
At the start of the video, I check he marks on the timing and crank and they are not lined up.
I am doing my trafic engine at moment and after head gasket and new chain etc shoulds OK but when accelerating it rattles.
I belive Imy crank needs timed. As I never checked! When assembling. I double check timing the other day but did not realise I need to time the crank.

[@Javier_Cars_Motors]

Buen trabajo realizado 👍

[@user-pd9pi4mo1o]

y los tres eslabones dorados de la cadena donde an caido no?

[@hildakhunou9364]

If the crank is not at TDC can I turn it without any special tools?
Camshaft is still out for the moment

[@strongdiesel7912]

no.. you don`t need any tool to turn the engine you need a 32 mm wrench

[@OK-19e]

But u need to Block the crank. Otherwise it is May slightly out

[@hassanvirk1308]

Thanks bro

[@barmotorworx]

This is painful to watch. 🤣
Don't ever take your M9R or R9M to this garage.

[@user-gh8uj1fj1l]

Вы неправильно выставили зажигание

[@franceinfo377]

Professionnel 👍

[@AtaAgaya-dv5gx]

Gracias ❤

[@steptoeandson3554]

You didn't fit the plate back on the camshaft, hope you realised before fitting the cover

[@strongdiesel7912]

hi mate you are the first to notice....good eye...I notice myself after I edited the video and next day I fix the problem thx

[@vanderleialaparecido3060]

Parabens

[@user-ic4rh8lp3i]

Звёздочкоу распредвала не тем боком поставил , шайбу на з вездочку вообще забыл , этот мотор без фииксаторов собирать не стоит

[@davidebloise4015]

vedo che il meccanico non sa il suo mestiere a fondo ha fatto tanti errori nel montaggio della catena da uno a dieci gli do quattro

[@krzysztofkawalec9937]

it work

[@jamesmutuku4813]

How much

[@BiaFouad1007]

I will tell you the reality.. i did like this, i am refering at the method, but after i put all toghether, the car has a hard start, and error code p0380 p0340, i suggest you not to do so.. maybe it works, but, don't take the chance.. i have to open it now and wait for the tool.

[@szosiu7823]

No block !!!!

[@eugenijusmarkauskas3712]

Bepruotis

[@enverdunya]

Selam ustam abone oldum beklerim

[@strongdiesel7912]

teşekkürler

[@aleksfakshteyn7476]

И да будет встреча кпапана с поршнем

[@strongdiesel7912]

Спасибо

[@AlexeyVladimirovich4]

Не встретились 😉

[@evgenykoval6897]

Аматор, недоучка....

[@FrankHarris-xg9bd]

This is a very bad mechanic 😂 timing is not 100 percent

[@antonypereira3853]

Is this the marry of the BIBLE ?