The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series). The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment. The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
everybody fails to see the purpose of this video... any mercedes mechanic knows that they used to build cars in a way that made it easy and quick for mechanics... they are returning to this type of engineering. The point of the video is that they can change a timing chain in 13 minutes... its impressive to see how a car can actually be engineered with future repairs in mind. nowadays, cars are engineered to be put together, but not worked on
No it's because most Manufacturers are using (thin)low viscosity oil and making the intervals longer 16-20000km for oil changes due to that chains stretches
Great video. Will come handy when these engines will reach high mileage with a poor service, because poor oil causes chain wear guys !! Especially dpf regens pollute the oil real bad...
This is the shame of Mercedes Benz. Chains suppose to last 1 million miles, if maintained properly. Mercedes get worse and cheap quality every year, and very expensive for bad reliability.
all diesel in merc w 123-124 2.0d four cylinderom604 2.5/td five cylinder om605 and 3.0/td six cylinder om606 was made only by mercedes not reanult/nissan .Reanult/nissan 2.5td is not same engine
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series). The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment. The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
No one understands how this is entertainment for me. My mechanic friends get it. My wife thinks I'm obsessed beyond help with anything mechanical! She's right....
Here's why he's changing the timing chain on a new. When all those plastic fasteners and rail hooks see 5 years they'll be as brittle as can be. Do that on a 10y old car. Half the stuff you touch cracks in half. Ironic, the germans interiors are holding up nicely, but the plastic under the hood is made to break.
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series). The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment. The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
Moed al garny, This just an instructional video. As always: Mercedes Benz is the NUMBER ONE brand. Maintain your car properly, that’s all there is to it!!!
Number one brand I think not!!why would your so called number one brand be using a Renault m9r engine and a version of the k9k engine in their diesel??
Not long ago,timing chain used to be more reliable than timing belt.Now is the other way around.I saw on Ford engines better quality chain than Mercedes or Bmw.
Honestly what is the point of a chain now?, a belt is lighter more economical quieter can last up to 200k km and is easier to change, i mean like why all this trouble??
Chain doesn't make noise if it's ok,it lasts much longer in general except few makes make thin chains so they brake or need replacement..chain is a better choice
JedemPoKucama no its not it costs thousands to replace because the whole engine has to be taken out usually its in the back of the engine and yes chains are louder than equivelant belt diesel driven engines
When it coms to engine Mercedes makes the most powerful engine Big Amg. But for my opinion toyota engine are more reliable,simple to maintain, cheaper and long live kilometers. That why i love Toyota
Mercedes don't make 1.6 engines they all come from Renault because of all there awards for the engine. Electrical parts are Merc but essentially a Renault with Merc badge
@@skillz1855 It's about 1000 $ here in Croatia but our monthly pay is 800 $ average and don't worry this kind of engines are for EU market only. Ffs it's a 1.6 liter diesel engine, in USA you have V8 monsters.
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series). The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment. The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
Obviusly some of the people that buy Mercedes want the three point strars on the front of the car and they don't understand nothing. Don't buy Mercedes with Reanult Engines (They're not Bad Engines). Fuck this commercial policy, I buy a Mercedes I Want an engine Made by Mercedes. Buy a Renault If you want an Renault engine, There are good cars and goes fine. They cost a lot less than a Merc to Buy And Maintain.
Pffff, bicycle chain for engine timing. Shame on you mercedes. My old C class W202 has thick 2 row chain and after 22 years and over 350k kilometers isn't been changed yet. And won't be ever changed. I really love mercedes, but soon I have to take a look over some younger car than mine but after such videos I am afraid that it won't be a merc animore.
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series).
The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment.
The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
This is the same engine as it's found under the hood of the Renault Kadjar 1.6 DCI.
kill one of the voice-overs
entweder deutsch, or english, not beide
gatti 500 should just do subtitles
everybody fails to see the purpose of this video... any mercedes mechanic knows that they used to build cars in a way that made it easy and quick for mechanics... they are returning to this type of engineering.
The point of the video is that they can change a timing chain in 13 minutes... its impressive to see how a car can actually be engineered with future repairs in mind. nowadays, cars are engineered to be put together, but not worked on
John Harbour well said 100^.
Need more like so everyone can see
Cảm ơn bạn chia sẻ hướng dẫn và cách thay xích cam xe mercedes-benz rất thực tế và chi tiết
Muy bien explicado y demostrado manualmente. Gracias
Посмотрел. Вспомнил наши сервисы. Ушел плакать в подушку
Брат ты долго плакал я гдето 3часа
Can you replace the oil pump chain without having to remove the oil pan?
Why you change a timing chain on a new car.... Answer because its a renault M9R engine....
azdej nedi to show like you people how need fix
Really? What a peace of shit!
No it's because most Manufacturers are using (thin)low viscosity oil and making the intervals longer 16-20000km for oil changes due to that chains stretches
W124 e220 m109 engine... Still first chain... 1993 production...
Demonstrate only!!!!
Great video. Will come handy when these engines will reach high mileage with a poor service, because poor oil causes chain wear guys !! Especially dpf regens pollute the oil real bad...
33 or 38mm and how can I know which one is good for me?
This is the shame of Mercedes Benz. Chains suppose to last 1 million miles, if maintained properly. Mercedes get worse and cheap quality every year, and very expensive for bad reliability.
Do timing chains need changed? My sprinter's done 170 000 miles and the chain's still tight
philzambo as long it's not rattling or slack well serviced van /car chain will prolong the cars life
Eventually yes. But not as often as a belt
Brilliant, very informative video. Thanks guys 👍👍👍
What a lovely meRcedes with a Renault engine .People who bought this car should know that , there is an engine made of cheese under the bonnet ,hahaha
I have this motor and i drove 130 000 km without problems. I love this car!
R9m motor taşıyan bir Megane Türkiye gibi bir ülkede 400000 km kullandım motor kaya gibi sağlam
Very realistic.. his hands didn’t even get dirty 😂😂
Nick Plona no fluids in car was drained before hand still super clean.
This is quality of new mercedes??? I have W124 2.5 diesel and made 1.5milion km and chain is still good.
all diesel in merc w 123-124 2.0d four cylinderom604 2.5/td five cylinder om605 and 3.0/td six cylinder om606 was made only by mercedes not reanult/nissan .Reanult/nissan 2.5td is not same engine
I have mercedes 300D w124 800.000km motor very good... mercedes 300TD w210 avantgarde 600.000km this very ok and new ML W164 300.000 OK
M9r engine Renault ????
demo only~ or study something
Yes and half the power, that engine is basically a tractor engine
Why Mercedes don't put double chains like on w211? This single chain won't last long
Its very like Renault traffic engine I'd bet my life on it 😊😊
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series).
The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment.
The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
Can anyone tell me about the A160 petrol engines, the facelifts from around 2016. Are they reliable and they have good engine blocks ?
No one understands how this is entertainment for me. My mechanic friends get it. My wife thinks I'm obsessed beyond help with anything mechanical! She's right....
Yo soy mecánico y me gusta mucho las marcas alemán en coches en éso admiro mucho a los alemanes en aviones y también a los russia
are heavy tattoos required for this job??
is complaining about other peoples tattoos (really just someones skin) required to follow suit after display of tattoo?
It is easy to disassemble a new vehicle, I would like to see you disassemble a vehicle with 3 years of use
Hi. Do you know a torque setting for crankshaft pulley? Thanks
Darude-sandstorm
Watched the entire thing. I don’t even own one
Bigfwop L hahah same, youtube in a nutshell
Diesel engine cars are not even allowed in my country, we only have petrol Mercedes, except SUVs.
This actually looks like an easy job. I’m surprised Mercedes didn’t over engineer this time
TomCook1993 It’s actually a Renault engine.
It's to show how it's done. obviously, nothing wrong with chain. you at home, will take 10 x longer b/c not too many ppl have this at there disposal
What type of hoist is that?!!! I want one
Hello,
Can you please tel me the lenght of the pin mot 1970?
Tnx.
Here's why he's changing the timing chain on a new. When all those plastic fasteners and rail hooks see 5 years they'll be as brittle as can be. Do that on a 10y old car. Half the stuff you touch cracks in half. Ironic, the germans interiors are holding up nicely, but the plastic under the hood is made to break.
I see another small chain inside , what happens with that?
That Chain is for the oil pump
@@agrproductions8813
So this chain dont need to be replaced?
loco That's a good question .... back in the 90s they said that that chian is good for ever but ... I can tell it to you sure
That chain is meant and take out the chain you just replaced. Don’t forget it’s a Renault engine. French junk.
Chain from cycle?
That was surprisingly easy.
Because this engine is made by renault
Why do you replace the timing chain? My toyota vios has been 600k km and no need to replace this
EA Channel because this is a mercedes 😂😂😂
Шестерни на ГРМ игрушечные, как на часах
Lots of silly comments ob timing chains not lasting. They won't if you don't service the engine correctly.
Wait a minute, is this a renault 1.6 dci?
I think this is 2.0dci from renault.
@@Wojtekcichy4 it's the 1.6.
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series).
The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment.
The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
They forgot to mention the part when it’s a few years old and all these plastic bits will be falling apart or breaking a you remove them
Moteur Renault M9T?
Я посмотрел бы как он играючи снимает фишки на тачки с 100к пробегом по рашки)))
Potpuno je besmislen posao bez zamene lanca uljne pumpe
U pravu si,sto posto !!
THIS IS 1.6 DCI R9M ENGINE
Motor M9R
Moed al garny,
This just an instructional video.
As always: Mercedes Benz is the NUMBER ONE brand.
Maintain your car properly, that’s all there is to it!!!
Number one brand I think not!!why would your so called number one brand be using a Renault m9r engine and a version of the k9k engine in their diesel??
, Hello how to upplay on your company because I am a experienced a mechanic how to upplay sir on your company
Arnel T. Tahari Visit or call your local dealership and tell them you want to work for them
this only show how to replace or replacement for a reason??
Not long ago,timing chain used to be more reliable than timing belt.Now is the other way around.I saw on Ford engines better quality chain than Mercedes or Bmw.
Honestly what is the point of a chain now?, a belt is lighter more economical quieter can last up to 200k km and is easier to change, i mean like why all this trouble??
Chain doesn't make noise if it's ok,it lasts much longer in general except few makes make thin chains so they brake or need replacement..chain is a better choice
JedemPoKucama no its not it costs thousands to replace because the whole engine has to be taken out usually its in the back of the engine and yes chains are louder than equivelant belt diesel driven engines
@@arlind530d I drive a petrol with a chain and it's nice..w210 e420
JedemPoKucama im sure its nice thats the big v8 engine nice car you have there
why would you replace timing chain in brand new car?
Lukas Kowalski new Mercedes are all rubbish and cheap, quality and reliability is completely gone
High mileage
Because Renault site
Because it’s a tutorial video...
Mercedes were always overpriced pieces of shit!
When it coms to engine Mercedes makes the most powerful engine Big Amg. But for my opinion toyota engine are more reliable,simple to maintain, cheaper and long live kilometers. That why i love Toyota
No newton tools?
It is Mercedes using Renault engines? Or it is Renault using Mercedes engines?
The car is brand new is so clean .att the time u do yours is so greasy and all hoses broken and the problem gets worse junk...
That chain cap looks unserious.
The voice over is like bruuuuhhhh
Türkiyede neden böyle ustalar yok 😢😢😢😢😢
Var yetkili Servicede yanliz yetkili service cok arac trde görmüyör
Bizim ustalar bunlari havada yer
i think mercedes's engins are strong and durable but they are over engineered that make the repair difficult and expensive
FOLKS CALM DOWN ITS A DEMO VIDEO THE CHAIN DID NOT HAVE TO BE REPLACED!
Why does it need a new timing chain already?
With this engine, this is already a MERCEDES .......... Renault ......................
Как установить без приспособления?
Никак
So why does it take 2 days “by the book” when he did it in 12min. Lol.
Cause this way you would pay more
It's not in real time you tool
waw super
Nice
انا عندي سياره داو نبرأ اول منخش الماء تكعد ادخن في بنزين
Yo soy mecánico en coches y camiones pero me gusta mucho los aviones alemanes y russia
Good for you.
The new cars are completly rubish,juncks.
Sadly they are..., its all money scam money pits to steal your wallet in plain sight
bicycle chain, fahrradkette lol
SATITETA old cars are realy good cars not this new shit cars 🧐
And $3,000 later you leave the dealership with all smiles holding your ass
New model have many chain sensors, little be worn engine light will come on,wont turn off untill you replaced 🤑
For real?
Mercedes don't make 1.6 engines they all come from Renault because of all there awards for the engine. Electrical parts are Merc but essentially a Renault with Merc badge
Mercedes with renault engine 🤦♂️ this is why i drive bmw, atleast they make their own engines, good or bad
@@arlind530d BMW also collaborate with PSA for engines.
Do I have to comb my hair back first ?
No gays allowed to do this so you're ok.
:)))
Yeah I'll stick with the 80s Mercedes instead...this engine a nightmare and mostly fixed with special tools.
nsx special tools that’s in nobody’s toolbox
Yeah but how much does the dealership charge u lol
That will be 3000 bucks, please!!
More
@@skillz1855 It's about 1000 $ here in Croatia but our monthly pay is 800 $ average and don't worry this kind of engines are for EU market only. Ffs it's a 1.6 liter diesel engine, in USA you have V8 monsters.
Renault engine 1.6 DCI, 130hp
The OM 622 and OM 626 engines are four-cylinder - diesel engines for Daimler AG and come from a strategic collaboration with Renault-Nissan. The OM 626 was first used in autumn 2014 in two C-Class models (205 series).
The basic engine is identical to Renault's R9M engine, and is produced by Renault at its factory in Cléon (France). The engine was then completed at the Mercedes factory in Bremen. Mercedes-specific parts include a start-stop function, auxiliary units (compressor and air conditioning generator), a special double-mass flywheel, a modified engine control unit with additional functions and exhaust after-treatment.
The OM 626 and Renault R9M are among the world's first diesel engines to have steel pistons instead of aluminum pistons. Steel pistons with reduced stress piston rings from the supplier Mahle are used. [1] Steel pistons are said to offer advantages in terms of consumption and power compared to aluminum pistons due to lower friction and better thermal behavior.
In Russia it costs 80000 rubles , average salary 50000 rubles, great :(
In Canada cost 4000$ average pay 3200$
It is 1.6 renault engines👎quality short term life ..
Gotta get rid of one of the voices that had me all messed up almost made me nauseated trying to listen
M9r renault, Jajajajajaja.
Renault=Mercedes=Dacia.
This is Renault engine.
The audio is AWFUL! Turned if off after 10 sec. Voice echoes on top of each other such that you can't understand anything. F for failure.
Renault best Parts ever😂
Wtf was the guy stoned wen editing the video
Incorrect tightening tork!! Warning⚠🚨⚠🚨
Mercedes crazy? This is the same m9r engine from the old Renault !!!
Why would you need to replace the timing chain on a brand new car? Because Mercedes.
You don’t need to change,
You don’t get it, do you?
This is only technical instructions!!!!
The translation is very bad my friend
Это двигатель рено 1.6 R9M.
Voice dabbal okay obhar
Obviusly some of the people that buy Mercedes want the three point strars on the front of the car and they don't understand nothing.
Don't buy Mercedes with Reanult Engines (They're not Bad Engines).
Fuck this commercial policy, I buy a Mercedes I Want an engine Made by Mercedes.
Buy a Renault If you want an Renault engine, There are good cars and goes fine.
They cost a lot less than a Merc to Buy And Maintain.
Motor da Renault master
خابرني اذا رجعت شتغلت ههه
M9R actually
Pffff, bicycle chain for engine timing. Shame on you mercedes. My old C class W202 has thick 2 row chain and after 22 years and over 350k kilometers isn't been changed yet. And won't be ever changed. I really love mercedes, but soon I have to take a look over some younger car than mine but after such videos I am afraid that it won't be a merc animore.
Lol il fait une distribution en moins de 13 minutes ,
What the hell is merc fitting shit Renault engines you are supposed to have a proper merc engine that lasts not French crap that's unreliable
On comprend rien au explications.
Just look at that poor quality chain.It looks like bicycle chain.
The best or nothing....
THIS IS FAAKKING CRAZYYYY. GO CRASH IT GET A INSURANCE CLAIM A NEW CAR. LOL