Lost Wax Casting Process and Other Stuff - Vlog#56
HTML-код
- Опубликовано: 8 сен 2017
- A week before Andrew goes to Canada and there is so much work to be done, and the Argon gas runs out on the PUK machine.
This vlog mainly shows the final part of the lost wax casting process Andrew started in vlog #54.
THE EQUIPMENT I USE TO VLOG
Canon 70D, Body; tinyurl.com/j89xw2h
Canon Lens 10-18mm; tinyurl.com/gncnrwz
Tripod for Canon; tinyurl.com/hdhuz6z
Memory Cards; tinyurl.com/z8mhuk4
Card Reader; tinyurl.com/z97tccx
Microphone, Cheap; tinyurl.com/hbxtthg
Microphone; tinyurl.com/zpjpoeq
Canon G7X Camera; tinyurl.com/jkvu4b4
Tripod for G7X; tinyurl.com/z27m9aj
Mini Tripod; tinyurl.com/he93omu
Mavic Drone; tinyurl.com/jfh9da4
360 Camera; tinyurl.com/jbmrugq
Andrew shows you many hints and tips that he has gained from his experience as a professional goldsmith.
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website. 
Хобби
I want to say thank you, I watched your vid on sand casting and it changed my life literally. I’m so pleased with what I have made. Really appreciate you sharing your knowledge and you have a great and natural teaching style.
I felt for you and your family at the loss of your sofa, very ☹️. I thought you were hasty it letting it go, I saw another 5 years life in it. 😂😂
good one again always like the vlogs a day in the life of a busy jeweller, have a good holiday you are supposed to forget about work take it easy take care all the best
Hi Andrew, I love At the Bench and your intro vlog on wax carving. I would also love to have more vlog info on the carving process. It's hard to find. A ring, beginning to end, for example. Thanks!
Do you need a lot more ventilation in a room to have a paragon oven and the casting equipment?
I'd be embarrassed about THAT couch too! (Just kidding!) LOVE your videos, so fun and funny! Thanks for making them!
I also don't like taking vacations. I am pestered with thoughts of things I need to do, and cannot relax. I am more at ease whilst at work.
I am in the process of making a 9.25 belt buckle on lost wax casting but I don't have a kiln. What do you recommend me to do?
Hey Andrew, wasn't sure which video I should ask this question on but here it is.
If I make a component in wax (for example a bead cap), if I decided I wanted to make a single mould that branches off multiple copies of the same wax component, how would I make such a mould? How do I reproduce the main wax compliment multiple times. Sorry if that sounds confusing. Basically 1 component with multiple sprues of the same component, for mass production
I have seen lost wax casting done before with encasing the wax object in what looks like clay and then fired in an oven or kiln on a history documentary about the romans is there more to it ? I ask because I would like to try lost wax casting but can't afford equipment like this
Very good
Always happens .I went to DC .with five orders i left behind ..Its crazy .but very good work thank you
How does the vacuum effect the metal? Pulls through the investment cast? Is it porous like a sponge?
hia andrew do you use a DeBubblizer on your wax before you pour investment over it.im trying to make my own a few drops of finish rinse aid mixed with water in a spray.or do we need to do this.
Hi if you don't mind me asking what is your ventilation situation like indoors?
I just got a whole vacuum casting setup and was wondering if it's safe to do the actual casting inside? My shop is down in my basement and I'm not sure how much ventilation I can set up at the moment
First of all, an ITALIAN coffee 😁😁😁! Cheers from Italy!!!👋👋👋
Can you cast some gold items next time?
Can a homemade oven be possible...
hia andrew your kiln dewaxing is set at 140c am i correct.cheers
Yeh. And it stays at that temp for an hour or so
I have just purchased my own kiln a few months back, and have recently found out that it can’t take the wax. The rules said I can only burn my mold after the wax is ejected out of it. How to I deal with this issue? How am I supposed to get the wax out without using the kiln?
Can’t take the wax? What kiln is it?
@@Atthebench I have the Rapidfire Pro-L kiln
@@keithgwynn2200 So why can't you melt wax out in that kiln?
Honestly I don’t know why exactly. But there’s a RUclips video talking about this exact model, and she states clearly that it can’t handle the wax. But I can’t find any further explanation else where, as to why. Not even the manual that came with it makes mention of “don’t do this” with wax.
So what would you do in this situation?
How many times can you melt on a graphite crucible before is no longer usable.
Depends. No set amount, sorry.
@@Atthebench sorry for asking this on such a old video but i was wandering what model's of kiln you have cus im in need of a smaller and bigger kiln for large projects but iv struggled to find any of good decent quality so i was wandering if you would reccomend your kilns and if so what make and model they are thank you if you see this.
Dear Sir How much water for plaster?
It depends on how much investment powder you have
Sir, I have 1 kilogram of gypsum, how much water should be added
Can I email a private message? If so how? I am new to casting.
Casting in your apartment. Don’t spill any on the rug haha.
So viel ist zu viel danke für den Film
gypsum
Sorry the only dissapoinment,was that ,." They actually came out,just the way they were designed, so much,effort and "energy",electricity of course..I BE SEEING,BETTER FROM HIS OWN REPERTOIRE. I GUESS HE THINKS TALKING IS IMPORTANT. AND OFF COURSE IS HIS PRERROGATIVE.
I'm going to push back against you. I don't think that it's true at all that you don't like _going_ on holiday. I think that you don't like the period leading _up to_ going on holiday. Just sayin'.