@@sylvanenergy Hi, yes I saw those welders, will wait a bit, hopefully, they will get cheaper, the same as flat TVs. What to the fishing... Hope that politicians will end the global snot disease scare and everything gets back to the norm, and then we can enjoy the fishing.
Here’s a revised version that improves readability while keeping the information intact: --- Reforming typically operates at elevated temperatures, similar to destructive distillation, but in a continuous process. This process transforms a uniform, mostly heavy hydrocarbon feedstock into a variety of different hydrocarbon fuels, ranging from diesel fractions to petroleum gas. In semi-continuous reformers, also known as coking distillers, the feedstock is further broken down into solid carbon, which needs to be removed from the reactor cylinder before any subsequent distillation. Continuous oil distillation generally occurs at temperatures no higher than the actual boiling point of the oil. As a result, only oil is produced, while impurities, additives, and bitumen-substances with higher boiling points-are separated from the oil. In this process, no destructive distillation takes place. The base oil can then be chemically cleaned and used either as a base for lubricants or as diesel fuel. Therefore, if the goal is to produce a variety of products, reforming is the preferred method. The oil distiller can be effectively used for a secondary distillation of reforming outputs, such as petrol engine oil, automatic transmission fluids, or tire pyrolysis oil. --- This version is clearer and more organized while preserving the original content.
So which machine is necessary to get dielsel out of WMO? I see that you sell a number of manuals, reformers, retorts, stills, etc and it's confusing the hell out of me.
Does it cost you more to produce than to buy, e.g. equipment cost, electricity, etc (assuming small batches)? Otherwise, what is the return period for if someone did it for a single diesel 4WD?
Our current price for diesel per liter is NZ $2.70 - $2.80 per liter, in some parts of the world even despite the high prices diesel fuel is either not available or limited. thus it is $28.00 per 10L of diesel. Waste oil - is still possible to get it for free. Also if one wants to save money, then there is no point to buy the diesel distiller - build it yourself out of scrap metal. Electricity is still about $0.22 - $0.25 per kw/h Machine consumes 6kw per hour, produces about 24L per hour, plus reagents, all together may cost about $5.00 per 24L of fuel, still cheaper, yes one has to invest time as well, Find some time once a week - this is the reality of current energy crisis.
@@santeryi9 Hello guys , how are you all please I'm to help you to get good engine oil quality abd affordable price... I'm working ask salesman in UAE (DUBAI). I'm here to help you to disturb any kind engine oil you need .... Dm
everything depends on the quality of the waste oil, if something looks like bitumen, then you may clog it in a couple of hours, if filtered ATF fluid, then you may run it for the whole year without a problem.
@@santeryi9 Sir that is not what I meant ... I asked to know if my machine would be destroyed quickly if it worked continuously for 24 hours ... In short I asked, to see if the machine would melt and be damaged if it continued working .... I use 10 mm sheet for hot parts of the machine. Are made of ... (Reactor) Can you tell me your opinion about this ..... (I intend to reply comment youtube} 29/12/2021.
Given that he is running it at around 370°C and As stated by AZO Materials, grade 304 stainless steel possesses “good oxidation resistance in intermittent service to 870 °C and in continuous service to 925 °C.” However, they warn that “continuous use of 304 in the 425-860 °C range is not recommended if subsequent aqueous corrosion resistance is important.” I'd think that it'd last just about for ever.
At the moment of the production it looks really thicker due to some contaminants, but after the treatment the fuel is as viscous as the regular fuel can be.
At the time I am not building the oil stills for sale, but I have a set of plans for construction, you can find them here: www.doubloonbay.net/index.php?page=detail&get_id=24&category=Featured
Honestly, I did not think about it, anyway need to calculate the materials cost, the unit was built about 2 years ago and was collecting the dust until recently, so the materials prices were different back then. Also how complete should be the kit?
@@santeryi9 yes haven't things changed. I would think the kit would at least include the custom made parts you have. Maybe include things like pumps and temperature controller etc optionally. Cheers
...Здравей, Алек. Как да се сдобия с конструкцията на двете устройства - Това и другото за Етанол...Загубих време и линкове...Какво да Ти кажа...Тотално задръстване...
Alek, I bought the plans for the old design I'm still yet to start my build due to the high prices on stainless steel. Could you pm the price to upgrade to this design thanks .
Hello guys , how are you all please I'm to help you to get good engine oil quality abd affordable price... I'm working ask salesman in UAE (DUBAI). I'm here to help you to disturb any kind engine oil you need .... Dm
@@santeryi9 damn. I just ordered the plans for the old machine. Is it possible to upgrade to the new plans in the future? Thanks, Marlon H. from Germany
Patrick, I'll no longer build those things for sale, and it requires way too much time for the testing and cleaning afterward. It is ok to make one for yourself - keep it filled with oil, do not bother to disassemble. But when you need to, take it apart again and wash it up. Anyway, I am trying to get together a construction manual, and it will be released in PDF format, absolutely affordable.
Приветствую я твой давний подписчик с интересом смотрю. В моих краях много нефти, Дружище ты помог мне скинуть схему оборудование этого? Чтобы я мог сам собрать. Техническую документацию. Буду очень благодарен.👍
Скорее европейская, так как из отработаного масла, если бы был доступ к сырой нефти, то была бы арабская, и аппарат был бы поболя, - короче был бы я шейхом. А так ерзац бензин.
Hallow Alex,I've made a comment for your fraction reformer some couple of weeks ago and also I'm asking about your email address but you didn't reply my request . thank you.
great to see from you my friend. I hope things are looking up
Great to hear from you too. Things are looking up. I am an optimist.
@@santeryi9 All the best in 2022, let's hope a fishing trip in the future my friend. oh ya did you see those new handheld laser welders?
@@sylvanenergy Hi, yes I saw those welders, will wait a bit, hopefully, they will get cheaper, the same as flat TVs.
What to the fishing... Hope that politicians will end the global snot disease scare and everything gets back to the norm, and then we can enjoy the fishing.
How much does this cost
Just got here, and I'm curious, is that relay modulating the heater what's clicking or is that a pump somewhere?
Whats the difference between reformer and distillation and which method is better?
Here’s a revised version that improves readability while keeping the information intact:
---
Reforming typically operates at elevated temperatures, similar to destructive distillation, but in a continuous process. This process transforms a uniform, mostly heavy hydrocarbon feedstock into a variety of different hydrocarbon fuels, ranging from diesel fractions to petroleum gas. In semi-continuous reformers, also known as coking distillers, the feedstock is further broken down into solid carbon, which needs to be removed from the reactor cylinder before any subsequent distillation.
Continuous oil distillation generally occurs at temperatures no higher than the actual boiling point of the oil. As a result, only oil is produced, while impurities, additives, and bitumen-substances with higher boiling points-are separated from the oil. In this process, no destructive distillation takes place. The base oil can then be chemically cleaned and used either as a base for lubricants or as diesel fuel.
Therefore, if the goal is to produce a variety of products, reforming is the preferred method. The oil distiller can be effectively used for a secondary distillation of reforming outputs, such as petrol engine oil, automatic transmission fluids, or tire pyrolysis oil.
---
This version is clearer and more organized while preserving the original content.
So which machine is necessary to get dielsel out of WMO? I see that you sell a number of manuals, reformers, retorts, stills, etc and it's confusing the hell out of me.
Would this be fine for running in something like a 50 year old bulldozer?
As long as it is OK to run my 20 year turbo 4wd, then should be good for the 50 year bulldozer.
Does it cost you more to produce than to buy, e.g. equipment cost, electricity, etc (assuming small batches)? Otherwise, what is the return period for if someone did it for a single diesel 4WD?
Our current price for diesel per liter is NZ $2.70 - $2.80 per liter, in some parts of the world even despite the high prices diesel fuel is either not available or limited. thus it is $28.00 per 10L of diesel. Waste oil - is still possible to get it for free.
Also if one wants to save money, then there is no point to buy the diesel distiller - build it yourself out of scrap metal. Electricity is still about $0.22 - $0.25 per kw/h Machine consumes 6kw per hour, produces about 24L per hour, plus reagents, all together may cost about $5.00 per 24L of fuel, still cheaper, yes one has to invest time as well, Find some time once a week - this is the reality of current energy crisis.
@@santeryi9 Thank you for a detailed and insightful answer. :D
@@santeryi9 Hello guys , how are you all please I'm to help you to get good engine oil quality abd affordable price... I'm working ask salesman in UAE (DUBAI). I'm here to help you to disturb any kind engine oil you need .... Dm
Hi Alek,
Any news about new plans?
When it will be available to purchase from your website? I look forward to build my still.
The link to the new manual is in description.
How many continuous hours can this machine work?
everything depends on the quality of the waste oil, if something looks like bitumen, then you may clog it in a couple of hours, if filtered ATF fluid, then you may run it for the whole year without a problem.
@@santeryi9 Sir that is not what I meant ... I asked to know if my machine would be destroyed quickly if it worked continuously for 24 hours ... In short I asked, to see if the machine would melt and be damaged if it continued working .... I use 10 mm sheet for hot parts of the machine. Are made of ... (Reactor) Can you tell me your opinion about this ..... (I intend to reply comment youtube} 29/12/2021.
Given that he is running it at around 370°C and As stated by AZO Materials, grade 304 stainless steel possesses “good oxidation resistance in intermittent service to 870 °C and in continuous service to 925 °C.” However, they warn that “continuous use of 304 in the 425-860 °C range is not recommended if subsequent aqueous corrosion resistance is important.”
I'd think that it'd last just about for ever.
does the fuel produced have a higher viscosity than regular disel from the pump ?
At the moment of the production it looks really thicker due to some contaminants, but after the treatment the fuel is as viscous as the regular fuel can be.
prevet,\
where does all the sludge go thats distilled out?
spaceba.
Currenttly collektin it, later will process further with pyrolisys retort.
Can you produce motor oil with this distillation method, or only gasoline?
Diesel fuel, you can use this base for motor oil production as a base.
Hi I live in Canada and I was wondering how I could get blueprints or a way to purchase your distillation machine ?
At the time I am not building the oil stills for sale, but I have a set of plans for construction, you can find them here: www.doubloonbay.net/index.php?page=detail&get_id=24&category=Featured
did you bought it?
Hi Alek, few years back I buy from you Continuous waste motor oil distiller plan and you I find this. This machine is new version?
Hi, yes this is the new version.
@@santeryi9 and what is different and new?
What would you charge for a kit set one of these?
Honestly, I did not think about it, anyway need to calculate the materials cost, the unit was built about 2 years ago and was collecting the dust until recently, so the materials prices were different back then. Also how complete should be the kit?
@@santeryi9 yes haven't things changed. I would think the kit would at least include the custom made parts you have. Maybe include things like pumps and temperature controller etc optionally. Cheers
Hey mate, can U use it in new diesel cars, cheers
Yes, but only after a proper treatment.
@@santeryi9 cheers
...Здравей, Алек. Как да се сдобия с конструкцията на двете устройства - Това и другото за Етанол...Загубих време и линкове...Какво да Ти кажа...Тотално задръстване...
Здравейте, всички инструкции са на тази страница: www.doubloonbay.net/index.php
have a plan to show how to build this machine?
Not yet, but is is almost complete.
@@santeryi9 when will the plans be ready to buy?
@@znaszgoprzeciez2229 Hi, it is almost ready, you can contact me and buy the alpha version of the manual (not refined one) ferromit.com/contact.html
Alek, I bought the plans for the old design I'm still yet to start my build due to the high prices on stainless steel. Could you pm the price to upgrade to this design thanks .
Hi, I've updated your download page so that you can also download the new manual.
Hello guys , how are you all please I'm to help you to get good engine oil quality abd affordable price... I'm working ask salesman in UAE (DUBAI). I'm here to help you to disturb any kind engine oil you need .... Dm
Hallow can you resel it to me please. Thanks
Any WMO still plans for free?
Not for free, but have one really cheap.
Hy,
I would like very much to lay mu hands in the drawings for a machime like this.
For a long time i'm figuring out how to build one.
Thanks.
Hi, the construction manual link is in the description.
Здравствуйте.
Интересует приобретение инструкции по сборке НБК 10-12КВт
Здравствуйте, все денежные вопросы чщерез страницу контактов: www.ferromit.com/contact.html
can we buy the plans for the new machine ?
The plans are in production yet.
@@santeryi9 damn. I just ordered the plans for the old machine. Is it possible to upgrade to the new plans in the future? Thanks, Marlon H. from Germany
@@V8freaks yes it's possible
@@V8freaks have you built the device? can you describe the experience?
@@santeryi9 I was about to order..do you recommend waiting for the new plans or does the old one work good enough??thank you
Sir, how do I remove carbon from black oil?
@@petroleumfix5498 thanks for yr help sir
Давно смотрю мне нравится
Alex where can I buy this machine or how can I contact you
Patrick, I'll no longer build those things for sale, and it requires way too much time for the testing and cleaning afterward. It is ok to make one for yourself - keep it filled with oil, do not bother to disassemble. But when you need to, take it apart again and wash it up. Anyway, I am trying to get together a construction manual, and it will be released in PDF format, absolutely affordable.
You can contact me via the contact page of my site: www.ferromit.com/contact.html
sir alex activate carbon remove
black diesel colour change
white colour
Сколко стоит апарат
На данный момент такие аппараты не делаю, продаю инструкции по самостоятельной сборке.
@@santeryi9 I want buy your project and documant
Хочу такой аппарат где приобрести
Hello my dear friend Alek... Please suit electronics display temperature metre and elements...
Приветствую я твой давний подписчик с интересом смотрю. В моих краях много нефти, Дружище ты помог мне скинуть схему оборудование этого? Чтобы я мог сам собрать. Техническую документацию. Буду очень благодарен.👍
Как только будет готова инструкция то помогу, пока в производстве.
Awesomeness
I need this
Арабская самогонка
Скорее европейская, так как из отработаного масла, если бы был доступ к сырой нефти, то была бы арабская, и аппарат был бы поболя, - короче был бы я шейхом. А так ерзац бензин.
.
Hallow Alex,I've made a comment for your fraction reformer some couple of weeks ago and also I'm asking about your email address but you didn't reply my request . thank you.
@@pershosea I replied to your Gmail address a few times, please check your spam folder
@@pershosea my address ferromit @ ferromit.com