Budget Friendly TopOak Rooftop Tent Install and Walkaround

Поделиться
HTML-код
  • Опубликовано: 30 мар 2024
  • In this video, I unbox and install the low cost, high quality ​⁠‪@Topoak‬ Galaxy 1.0 Rooftop Tent on my ​⁠‪@cbiprinsuinstalls‬
    This tent is listed for $1299 on their website. Compare to the $3995 RoofNest Falcon Pro.
    I have a code and link below for you to save 10% on your own Galaxy 1.0.
    Click on this link to take you directly to their website and automatically have your 10% discount applied.
    topoakoverland.com/discount/D...
    Or enter the code below.
    Code - DJOVRLND
    Here is a link to the Prinsu 1" Tent Mounting Feet
    prinsu.com/product/1-tent-mou...
    Additional Product Codes
    15% Off Mictuning Rock Lights
    Amazon:
    15% off code: 15CHADC2IC
    www.amazon.com/promocode/A3O7...
    Website:
    15% off code: DJ15
    mictuning.com/products/c2-rgb...
    Below is a list of other gear and modifications on this Overlanding Rig.
    BF Goodrich KO2 285 70 R17
    RSG Angled Rock Sliders
    Toytec Boss Aluma Series
    RCI Skid Plates
    Top Oak Galaxy 1.0 10% Code - DJOVRLND
    Duro Bumps
    SPC Adjustable Upper Control Arms
    C4 Lowpro winch bumper
    Smittybuilt X20 10,000lbs Winch
    Diode Dynamic SS30 inch light bar
    Diode Dynamic SS3 Fog Lights
    Diode Dynamic SS3 Ditch Lights
    Cali Raised low pro ditch light mount
    Auxito 24,000 Lumen LED headlights
    Garmin Power Switch
    Viair 300p Portable Compressor
    Odyssey AGM24F Battery
    Rotopax 3 Gallon
    SetPower 47qt Fridge
    SetPower Slide
    Jetboil Genesis
    GSI Bugaboo Camper Cook Set
    Sceptor 2.5 Water Can
    Ecoflow River 2 Max
    Ecoflow 160w Solar Panel
    ARB Snatch Strap and Tree Saver
    RhinoUSA D-Ring Shackles
    OVS Nomadic 180° Awning
    *Disclaimer: Perform at Your Own Risk*
    The content provided in this video is for informational and entertainment purposes only. I am not a licensed professional, and this video should not be considered professional advice. Any actions you take based on the information provided in this video are strictly at your own risk.
    By watching this video, you acknowledge and agree that I am not responsible for any damage, loss, or injury resulting from the purchase, performance, or installation of any products or procedures discussed. Always consult with a qualified professional before attempting any actions described in this video.
    *Use or perform at your own risk.*

Комментарии • 14

  • @redbeastadventures
    @redbeastadventures 3 дня назад

    Great video. Thanks for making it. Looks like they made some improvements to this version of the tent as they did with the Stellar variant. Put in the vents, upgraded the bar and posts (looks the same from the videos I watched) as the new Stellar. Was going to go with the Stellar but I like the improvements to this one and the larger side windows to allow more airflow. So I might get this one instead.

  • @Robert-Jaudon
    @Robert-Jaudon 2 месяца назад

    Very nice! Good tent from the looks of it. Thank you for the video.

  • @bobbyg212
    @bobbyg212 2 месяца назад

    Very nicely done! Especially liked the initial mounting walk-through on your 4 Runner.

  • @Yesteryearmedia
    @Yesteryearmedia 9 дней назад +1

    Exactly how many inches thick is the Closed Shell - which would also include the TRACK that's welded on the bottom? Great video - Thank you!

    • @macairtuber
      @macairtuber 5 дней назад

      Need this measurement also

  • @andrewcable694
    @andrewcable694 22 дня назад

    Great review, I just ordered one! With a 1” Riser would you be able to reach in to install the nut on a bracket on one of the middle crossbars. I have a 4Runner with Sherpa Creststone, so similar setup. Thanks

    • @destinationjourney_overland
      @destinationjourney_overland  22 дня назад +1

      I’m not sure on the Sherpa. You would not be able to do that on the prinsu rack. What some people do is install the crossbar on the tent first before putting it up on the roof rack. But that takes precise measuring. If you’re getting 1 inch risers from prints, I would suggest also getting four extra grade 8 bolts, washers and lock nuts from the hardware store so you can have two mounting points in each riser. Prinsu only provides 1 bolt for each riser

  • @tristanklehr9855
    @tristanklehr9855 2 месяца назад

    when’s the 5 runner coming out?

  • @bobbybrown5497
    @bobbybrown5497 22 дня назад

    Question, do you think someone 6.5 could fit in one of these?

    • @destinationjourney_overland
      @destinationjourney_overland  22 дня назад +1

      It might be tight unless you lay a little diagonal. The mattress is about 79in and you are 77in. So you’re going to be going edge to edge.

  • @reelcurious
    @reelcurious Месяц назад

    How much does this tent affect fuel mileage at interstate speeds?

    • @destinationjourney_overland
      @destinationjourney_overland  Месяц назад +1

      I just took a trip to Missouri with the wind. There was no effect on the way back against a pretty strong wind. I lost about a mile to a mile and a half per gallon from my best estimates.