You guys should of also used a universal 43 magazine for all the .43 markers having different ones is so inconvinient, I hope one day you make this magazine like the glock magazine no need an allen key just turn the bottom
I mean of course the real ones use different ones for them selves but your magazines are LITERALLY 99% the same LOOKING SHAPE AND SIZE only difference is alittle modification to fit the marker and the brand on the bottom...maybe make a universal one and sell the bottom pieces for brand wise....... idk, then again if you did you'd have to remake ALL markers to fit the glock 17 mag so yeah i guess thats not happening, but if you did make a universal one then just sell us the other parts to add onto it...
I'm very new to paintballs however i cannot find a way to take the slide off the maintain the gun by cleaning and lubing??? I just got this too every video they just push down the two things but mine wont budge???
Normally you would not have to take the slide off for regular maintenance. By design the way the inner barrel seals inside the magazine when fired it reduces the chance of paint and powder getting inside the gun. Just adding silicon oil to the slide where it moves on the frame and a drop in the firing pin area keeps it lubricated. Both of these can be done without removing the slide. If you feel like you have to remove the slide please give us a call and we'll see if we can assist. 479-646-4210 ext.7
This gun everytime i tightrn the co2 only twice so far i hear no hissing sound like normally but it indeed ks pierced because it shoots like 4 full magazijes easilu and still has enough fkr maybe 2 more mags but weaker shots...
@@t4e Also I just found out this was made AFTER the glock?? why didntyou guys just make it exactly like the glock magazine? no allen key needed, this is my favourite looking one for sure, but the allen key mechanism gets old and thats why the glock always is better to use
The instructions on changing the VP9 grips are on page 12 of the manual. The pin should be removed from right to left as it has the serrated end on the left side to lock into place.
Is there a suggestion what spring to use when shooting pepper balls I recently was testing pepper balls with the black spring and noticed One cracked in the magazine could it be that the black spring is just too tight in the silver spring it comes with would be softer on the tension
T4E is made for training or recreation. Regarding different types of rounds used, it could have been a compromised round with fracture/weak point. We haven’t seen any consistent reported issues with the round-types recommended in the owner's manual. Please note that all brands/types of rounds can vary in quality from batch to batch.
Hmmm. This is the first we've had this brought to our attention. Picked up one had laying here. When in the gun fully it doesn't seem to have a way to come off. Dropped one on the floor and it stayed on. Not sure what's going on with the one you have. Might give our service techs a jingle. 479-646-4210 ext.7.
You guys should of also used a universal 43 magazine for all the .43 markers having different ones is so inconvinient, I hope one day you make this magazine like the glock magazine no need an allen key just turn the bottom
I mean of course the real ones use different ones for them selves but your magazines are LITERALLY 99% the same LOOKING SHAPE AND SIZE only difference is alittle modification to fit the marker and the brand on the bottom...maybe make a universal one and sell the bottom pieces for brand wise....... idk, then again if you did you'd have to remake ALL markers to fit the glock 17 mag so yeah i guess thats not happening, but if you did make a universal one then just sell us the other parts to add onto it...
Thanks for the suggestion. Worthy of discussion.
I'm very new to paintballs however i cannot find a way to take the slide off the maintain the gun by cleaning and lubing??? I just got this too every video they just push down the two things but mine wont budge???
Normally you would not have to take the slide off for regular maintenance. By design the way the inner barrel seals inside the magazine when fired it reduces the chance of paint and powder getting inside the gun. Just adding silicon oil to the slide where it moves on the frame and a drop in the firing pin area keeps it lubricated. Both of these can be done without removing the slide.
If you feel like you have to remove the slide please give us a call and we'll see if we can assist. 479-646-4210 ext.7
This gun everytime i tightrn the co2 only twice so far i hear no hissing sound like normally but it indeed ks pierced because it shoots like 4 full magazijes easilu and still has enough fkr maybe 2 more mags but weaker shots...
Great to know there's no problem! We don't always hear the hiss.
@@t4e Also I just found out this was made AFTER the glock?? why didntyou guys just make it exactly like the glock magazine? no allen key needed, this is my favourite looking one for sure, but the allen key mechanism gets old and thats why the glock always is better to use
How in the world do you change the pistol grips, the pin is in tight, how much hammering does it need ? Thanks
The instructions on changing the VP9 grips are on page 12 of the manual. The pin should be removed from right to left as it has the serrated end on the left side to lock into place.
Is there a suggestion what spring to use when shooting pepper balls I recently was testing pepper balls with the black spring and noticed One cracked in the magazine could it be that the black spring is just too tight in the silver spring it comes with would be softer on the tension
T4E is made for training or recreation. Regarding different types of rounds used, it could have been a compromised round with fracture/weak point. We haven’t seen any consistent reported issues with the round-types recommended in the owner's manual. Please note that all brands/types of rounds can vary in quality from batch to batch.
Anything to secure the magazine plate? This thing constantly wants to wiggle off and shoot the magazine spring out
Hmmm. This is the first we've had this brought to our attention. Picked up one had laying here. When in the gun fully it doesn't seem to have a way to come off. Dropped one on the floor and it stayed on. Not sure what's going on with the one you have. Might give our service techs a jingle. 479-646-4210 ext.7.
Stop touching it so much mine stays in still easily but I knownexaxtly what you mean just don't force it to move so much where it'll just pop off.
are these available for Canadians? if so, where do I buy one?
Yes, we have dealers in Canada selling them
Impact Pro Shop is one: www.impact-proshop.com/paintball-pistol/
@@t4e any word on the Walther PDP or is that down the road?
Impact Pro is a lot closer to me than two other dealers
@@loganwhite3904 It is supposed to be here before the year's end.
I only have seen SFP9 engraved on the slide on these T4E guns at stores. Yours has VP9 engraved on the slide. How come?
It's the same pistol. Some were produced for Europe with the SFP9 designation.