i am quite sure that most watch tutors here are talents, they at least got steady hands, sharp eye sight and great endurance . Tiny parts like screws always jumping here and there,servicing work stops at once when i lost one of them~~~luckily it's my hobby only
Thank you very much for your video. I have an old Folex with this movement, that I have had for many years, and I'm now in the process of giving a service, and i had a spring jump out while removing it, and I didn't see where it came from and I came across your video. It really helped at lot and now I know where the spring is supposed to be :)
Thank you so much for your great and clear tutorial. Original Mingchu 2813 though cheap but runs well, yet there are cheaper copies exist (less than $10), so be aware
Thanks for watching my video 🙂... What fascinates me, even though these calibers are cheap and has no finish, but after service they run pretty well...
I bought 2 cheap 2813 movements for some really crap old fake watches to play about with that were given to me when I gave my dad another watch for his birthday and he offloaded these to me ( it was cheaper to try new movements I thought, than trying to get hairsprings that probably didnt even match to a 30 yr old chinese movement "sbizz") This is where my problems just got worse :D The stems a different size to orignal watch so no chance of just refit and I seem to be forgoing the spring action in the original stem. The face locating feet where in opposite where I really needed them. Had to remove them, and couldn't really find any easy way to refit but did see a video about this which would require new dial feet anyway. One of the assemblies was crap date doesnt properly circulate. Both movements I made rookie errors and on removing stem it was out of position so need to be reset so it can use all 3 positions. So neither able to be used though 1 faulty and too late to return though. Tried to take one apart to see thinking it would be like other videos just removing auto movement but I didn't watch this one first to realise that actually the whole movement comes apart here :D Although this is the one with the bad date wheel anyway faulty so perhaps at least thats a thing. At least I managed to work out refitting the calendar/wind/time set position back but no concillation but perhaps using this video can manage to put the movement back together :D Amateur fun at least it hasn't really cost me much, 20 + post/fees from alixp
GREAT, BUT I WOULD LIKE TO SEE ( TIME CONSUMING ALING THE LID ' TOP' EVEN MOVE THE WHEEL TRAIN WITHOUT THE STEM !!!. I CALL THE 2813 THE HEADACHE !!! REPLACE FOR 8215... THE BEST.
Hello sir i bought fake rolex submariner date few days back and i started noticing that its not keeping the time after few hours after manual winding, even after i wear it continuously. I also now able hear some rattling noise inside it. Could you please give me any solution or your review on it? Thanks
i need your help friend, i just bought this same movement in a replica from dhgate and right from the box it doesnt work. i wind by hand and by shaking it and the seconds hand moves for a few seconds and then stops ? i wind over 40 times and it runs for about 30 seconds and then stops again..it wants to run but then just stops out of nowhere...any ideas friend?? thanks
@@watchwizard gues what friend!? i got bored and recently bought some oilers and some mobius, ive heard these chinese movements come with no oil...so i tediously took apart the movement best i could and oiled as much as possible, as soon as i oiled the escapement wheel she started running and hasnt slowed or stopped since...yah for me. glad i didnt give up so easily. lol
@@watchwizard Impressive 😲 What do you think about miyota 8200 series??8203 etc. From my view based on your videos and others who deal with 8200 Is that they are very simple (monobridge) for example with less moving parts. So what can go wrong 🤔🤔 😊😊 Thanks for your time to answer the comments 😙😙
@@panosvrionis8548I love working on miyota movement. But the only drawback, I have ever heard about miyota automatic movement, they are little bit noisy🙂...
Ha! Even you cheated at putting the bridge back (10:00) by a cut in the film. You didn't show it. How long did it take you? 3 days? I have tried so many times and I cannot get the pivots to line up. Even placing the bridge causes them to jump out. At $15 each it's not worth my time to continue. Horrible design.
Hahaha😅 ,Yes I cheated, So while training the wheels, first try to get 'paul winding wheel and reduction wheel pinions' in their respective jewels.. Once they are in, put one screw of their side and keep it little loose, so you can train escape wheel... And use hands while training, because its quite difficult to put bridge back in this movement. Hope its help😁...
I worked on a couple of these as training. If you can get these assembled you can assemble anything 😄. I found it easier to get the escape train pivots in their jewels and put one screw loosely. Then help the winding gears in place. You need 3 hands because you need to push the click so they fall in place. Horrible design😵
i am quite sure that most watch tutors here are talents, they at least got steady hands, sharp eye sight and great endurance . Tiny parts like screws always jumping here and there,servicing work stops at once when i lost one of them~~~luckily it's my hobby only
Placing the bridge on 5 wheels at once with a spring in the middle is one of the hardest things I have attempted to do. Is there a trick to it?
Thank you very much for your video. I have an old Folex with this movement, that I have had for many years, and I'm now in the process of giving a service, and i had a spring jump out while removing it, and I didn't see where it came from and I came across your video. It really helped at lot and now I know where the spring is supposed to be :)
Thanks for watching my video, this means a lot to me
Wow good job 👏👍❤ from Nepal 🇳🇵
Thanks
Thank you so much for your great and clear tutorial. Original Mingchu 2813 though cheap but runs well, yet there are cheaper copies exist (less than $10), so be aware
Thanks for watching my video 🙂...
What fascinates me, even though these calibers are cheap and has no finish, but after service they run pretty well...
where i can get the copy? i want to repair my dad old watch and need some parts...
Try ebay or AliExpress
@@watchwizard what is that chinese movement name?
@@hilmidegutji dg2813
I bought 2 cheap 2813 movements for some really crap old fake watches to play about with that were given to me when I gave my dad another watch for his birthday and he offloaded these to me
( it was cheaper to try new movements I thought, than trying to get hairsprings that probably didnt even match to a 30 yr old chinese movement "sbizz")
This is where my problems just got worse :D The stems a different size to orignal watch so no chance of just refit and I seem to be forgoing the spring action in the original stem.
The face locating feet where in opposite where I really needed them. Had to remove them, and couldn't really find any easy way to refit but did see a video about this which would require new dial feet anyway.
One of the assemblies was crap date doesnt properly circulate.
Both movements I made rookie errors and on removing stem it was out of position so need to be reset so it can use all 3 positions. So neither able to be used though 1 faulty and too late to return though.
Tried to take one apart to see thinking it would be like other videos just removing auto movement but I didn't watch this one first to realise that actually the whole movement comes apart here :D
Although this is the one with the bad date wheel anyway faulty so perhaps at least thats a thing.
At least I managed to work out refitting the calendar/wind/time set position back but no concillation but perhaps using this video can manage to put the movement back together :D
Amateur fun at least it hasn't really cost me much, 20 + post/fees from alixp
NEXT TIME BUY " DG MOVEMENT" BUT BETTER YET SWAPPED TO MITOYA JAPAN CAL 8215 SOLVE MANY HEADACHE... PLUS 😡... RALPH.
Super ji, awesome service
Thanks sirji...
Good video. Thanks
GREAT, BUT I WOULD LIKE TO SEE ( TIME CONSUMING ALING THE LID ' TOP' EVEN MOVE THE WHEEL TRAIN WITHOUT THE STEM !!!. I CALL THE 2813 THE HEADACHE !!!
REPLACE FOR 8215...
THE BEST.
Thank you so much. I have wanted to see that for a long time. Does it matter where you set the date wheel when reassemble?
Nope🙂
Sorry, I want to ask which needle for the Hong Kong Citizen 2813 machine is the same ?
Buy hand for Chinese automatic movement, it will match for this one.
@@watchwizard what is it sir?
I'm looking for the same needle, it's hard, mostly small ones, the needle doesn't go into the machine
@@adetyawijaya7405 you want hands for your watch, right?
@@watchwizard look for a suitable timepiece needle
Hello sir i bought fake rolex submariner date few days back and i started noticing that its not keeping the time after few hours after manual winding, even after i wear it continuously. I also now able hear some rattling noise inside it. Could you please give me any solution or your review on it?
Thanks
Hello sir, you need to get your watch serviced,most of the Chinese automatic watches are not lubricated.
@@watchwizard okay sir, thanks for quick response
i need your help friend, i just bought this same movement in a replica from dhgate and right from the box it doesnt work. i wind by hand and by shaking it and the seconds hand moves for a few seconds and then stops ? i wind over 40 times and it runs for about 30 seconds and then stops again..it wants to run but then just stops out of nowhere...any ideas friend?? thanks
Sorry to inform you sir, but there might be many problems in that movement..
So If there is a return policy, get the movement replaced sir....
@@watchwizard already in the process, just wanted to try and fix myself in between then
@@watchwizard gues what friend!? i got bored and recently bought some oilers and some mobius, ive heard these chinese movements come with no oil...so i tediously took apart the movement best i could and oiled as much as possible, as soon as i oiled the escapement wheel she started running and hasnt slowed or stopped since...yah for me. glad i didnt give up so easily. lol
@@johnnygregorio7200 awesome friend🙂, if only possible apply little bit of oil on pallet fork jewels...
@@johnnygregorio7200 if the amplitude is okay, then ignore my above comment🙂...
Where to buy
Bro, ye jo fake watches ate hai, usme
Chinese movement aur japanese movement me kya difference hota hai uspe ek video banaiye
Sir khali quality ka farak hota hai
Thanks 🫡🙏
Miyota clone🤔🤔??
Why?
It's cheap already
and durable
I think this one will be more cheaper than miyota 😅😂
@@watchwizard
Impressive 😲
What do you think about miyota 8200 series??8203 etc.
From my view based on your videos and others who deal with 8200
Is that they are very simple (monobridge) for example with less moving parts.
So what can go wrong 🤔🤔
😊😊
Thanks for your time to answer the comments 😙😙
@@panosvrionis8548I love working on miyota movement. But the only drawback, I have ever heard about miyota automatic movement, they are little bit noisy🙂...
@@watchwizard When used vaseline instead of oil to lubricate the rotor bearing, it is not very noisy.
@@petrvyhnalek3890 try using watch service grease
I want to service my cartier first copy watch how to contact you
Instagram
Ha! Even you cheated at putting the bridge back (10:00) by a cut in the film. You didn't show it.
How long did it take you? 3 days?
I have tried so many times and I cannot get the pivots to line up. Even placing the bridge causes them to jump out.
At $15 each it's not worth my time to continue. Horrible design.
Hahaha😅 ,Yes I cheated,
So while training the wheels, first try to get 'paul winding wheel and reduction wheel pinions' in their respective jewels..
Once they are in, put one screw of their side and keep it little loose, so you can train escape wheel...
And use hands while training, because its quite difficult to put bridge back in this movement.
Hope its help😁...
I worked on a couple of these as training. If you can get these assembled you can assemble anything 😄. I found it easier to get the escape train pivots in their jewels and put one screw loosely. Then help the winding gears in place. You need 3 hands because you need to push the click so they fall in place. Horrible design😵