1989 Box Chevy Build Ep.17 How to install QA1 Control Arms and Coilovers!!
HTML-код
- Опубликовано: 2 окт 2024
- In this episode of the Box Chevy Build Ill be installing QA1 Pro-Touring Control Arms and Coilovers. I cleaned and painted the spindles and put new powerstop rotors on with a fresh set of bearings!
All parts used links are below!!
QA1 Lower Control Arms
www.summitraci...
QA1 Upper Control Arms
www.summitraci...
QA1 Coilovers
www.summitraci...
PowerStop Brakes and Rotor kit
www.summitraci...
Bearings, oil seals and grease came from a local parts store.
Thanks for watching!!!!
I am so glad that RUclips recommended your videos and channel instead of those lame O ones. Sprayway and you would be an awesome duo, and P.S. sorry for the loss of your grandpa during all of these crazy times we are all going through together! I wish I could do this resto job to my 71 Caddy Coupe. Even though it’s dope already, seeing all of the clip getting done soup to nuts was cool as hell!
He popped up on my feed this morning and I just happened to be off work. I used to work on my cars a lot and it's cool to watch this come together.
I’m sorry to hear about your Grandfather. 😔 RIP🙏
That caprice is looking better and better every time you put hands on it.
You’re definitely going above and beyond. I like the qa1 stuff but something about that upper ball joint looks odd. You may either need a different ball joint or maybe have your spindle machined to accept the larger ball joint. I know you didn’t have everything tightened and torqued down yet, but I just thought I would mention that. I can’t wait to see it all painted and together with the paint, the roof, the interior and all. I know you’re gonna hit a home run with that one. 💪
Awesome video. The ending was special. Sorry for your loss.
Sorry for your lose bro
Thanks bro! 🙏🏾
Notifications gang… can’t wait to see this box in person.
Sorry for you lost bro 🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿
So with the coil over you don’t need a compressor or for the motor to be in the car for weight? Might’ve jus saved me a lot of time
Man I’m sorry for your loss! I just lost my grandmother and it’s the hardest one I’ve dealt with by far!
You should do full resto shop....you are very professional at what you do ....yes siiiiir
Sorry for your lost you need more views great video I’m locked in
Bro you just made that look too easy
My condolences big homie 🙏💔
thank you 🙏🏾
Sorry for your loss.
Good video!!!
You doing it yo
when you grease the bearing push it in the big end until it comes out the small send not on the side that way it gets clearer through the bearing hope that helps
Sumn ain't rite,,cuz,,about how smart you is ,,bruh,,I ain't never seen nobody,,break it on down like a 1911
😎🤟🔥🔥🔥
RIP to yo Grandfather big dawg. 🙏🏾💪🏾💯
Yo videos be having me laughing my ass off because you sound just like any dude working on his car. 🤣😂 I saw the video when you couldnt find the screws to yo trim. Lol Box coming together good tho fam. Keep going! 💪🏾💯 RESPECT!
Thanks bro! 🙏🏾 Bro i stg i looked everywhere! 🤦🏾♂️
@@SouthSideNate Aye Nate, did you ever put your brake dust shields back on or did you leave them off bro?
Sorry for your lost bro, & I really enjoy your content. It’s helping me get back into my build. So from one builder to another thank you. & keep dropping these much needed videos 💪🏾
I love your work.. but try not to use power tool to put bolts back in some shops I work at its a no no
Thanks bro! You’re right about the power tools tho, when doing my research i hear that all the time. On the front end i only used it to tighten up the upper control arms a lil because the bolts was just mocked up there nothing has bn torqued yet! 🦾💯
What’s the model number of that kit
the link is in the description.
Damn man!! Sorry to hear about gramps.
Thanks 🙏🏾
Condolences for your loss Bruh. 🙏🏾
Great video!💪🏾
What’s that steering shaft part number you used to replace the old stock steering shaft?
Did you have to Modify spindle for the bracket???
New subscriber here bruh....keep doing your thing homie.
Nice work I can't wait to put my shit on
Yessir!! Go time! 🦾💯
Good shit.. I'm subbed now
Thanks bro!! 🦾💯
What spindles you use?
Those are stock spindles!! i just painted them
How did you take the old spring out ??? What did you use???
Did your upper control arm come with a longer ball joint???? I was just in the garage doning the same shit omgggggg its alot or mf work
Following from Puerto Rico..Nice work.
Super super dope vid bro visual learning like myself need this
I just sub ! Great video and info. i will be redoing my whole suspension soon
Big props to you. I’m following the build all the way.
Wish you was my brother my car would be done and 🔥🔥🔥
Awesome video thank you! This helped a lot!
Following the whole build while I’m doing the exact same thing fam 👍🏾👍🏾💪🏾✊🏾✊🏾
Only channel on youtube about these boxes that really drop Gems. Salute bro keep doing yo thang
Thanks bro! I try to put out good content about the boxes because it’s not much on here! 💯🦾
This is a damn good informational video. Thank you.
Sorry about your grandpa bro.
Thanks bro!! 🦾💯
Keep doing your thing bro where you from I’m only 23 with a L’s brougham & I’m learning from you bro sorry for your loss keep these videos coming
🙏🏽🙏🏽🙏🏽 keep it up love your vlogs bro 💪🏾
Thank you for your video, condolences
Sorry for your lost fam
Thanks bro!! 🦾💯
Yo I'm tryna learn sumn yo,,how you do dat there,,
Great video sorry for your loss 🙏
Thank you 🙏🏾
You doing a great job on this car, u got some serious skills
Bro i’m studying everyday to get better and better at it. Honestly i really enjoy doing this! 🦾💯
Does this kit give the car more stability at the road?
Sorry for ur loss bro
Thanks bro 🙏🏾
Lmao this ls swap guru started good shyt bro
Dam bruh sorry for you lost, like I stated in that obs swap video you straight motivate yo boi!
What are you using for brakes
Blessing 🙏
Thank you!! 🙏🏾
Don't she see you working
Great vid, sorry for your lost homie
Sorry for your loss. The caprice is getting there. They make a packing tool but the best way it to press the bottom until it comes out of the top.
HMU...I'm in your area
Bro what site did u order ur rotors from
Whwre you get new studs at
How can I get in touch with you?
😭🙏🏾
🙏🏾🙏🏾
Sorry for your loss bro. Bad enough y’all got that bad weather.
Sorry about your loss bro
Great job brother 👏 👍
Sorry for your loss 🙏
Great video
Sorry for you're lost brotha my prayers 🙏 to you and you're family.
Thanks bro!! 🙏🏾
🫶🏽📦🌍
Dope content. My condolences to you and the family bro. 919
Thanks bro 🦾💯 He’s with grandma now they are at peace!!
Sorry for your lost bro but man I love the work and dedication you put into your builds that box Chevy is going to be hard bro!!!
Appreciate that bro!! it’s definitely different with him being gone the holidays was kinda weird this time. Thanks too i’ve had her a long time i want to to look amazing again!! 💯🦾
Are these factory spindles???
yea!!
Just now watching this, great video, very knowledgeable. Sorry for your loss, my condolences.
👊🏽
Praying 🙏 for you and your family young king for the your doing an awesome job on summer rain 🌧 peace ✌️ and love, ole school Chevy truck.
Good content brother.
Condolences!! sending healing energy to you and the family 🏁
Thanks bro! We laid him to rest today right beside grandma 👵🏾 They are at peace now!
Dope video make me want to put some on my 89 Box. 💪🏾
Yessir!! i’m anxious to see the ride difference! 🦾💯
Sorry for your loss man 🙏🏽
Thank you 🙏🏾
All those qa1 suspension parts should work on an El Camino that year also
Them.snap rings will ruin ur day without the right tool I hate em
Hell yea!! That’s why i went a got the tools because i’ve tried to fight them before and lost!! lol 😂