Cammed 5th Gen V6 Camaro!! Low rev growl, High rev scream!!
HTML-код
- Опубликовано: 24 авг 2024
- This video is a sound comparison of my 2011 V6 camaro before and after the Cam and other upgrades. The cams along with the LT headers really bring out the sound! Also this car is much louder in person than what the audio is producing.
Social media contacts below:
linktr.ee/Kriese
/ s_kriese_s
/ kriese360
You could of titled this a legitimate making a v6 sound like a v8 video...No doubt, it sounds very similar to a 5.3 at 2k-3k rpms without a doubt while most cammed v6's only sound this aggressive only at idle, and it's wild to actually hear a 3.6 sound so good while even cruising a lower rpms..I've heard cammed v6 stangs but they all lost the sound once they started moving..This camaro on the other hand could trick alot of people just cruising through the city...Best i've heard, but on the other hand, Chevy is notorious for producing good sounding v6's..The 4.3's sound pretty wild with certain flowmaster setups alone...3:36 😆
Thanks man! This thing attracts a lot of attention in real life and it blows there mind when I tell them it's only a v6 😂😯🤣
Confucking grats on making a solid sounding v6. Truly well done and a truly unique tone
Thanks bro!! I really appreciate that. Stay tuned I'm not done yet not by a long shot!💯👍🏾
2010-2013 camaro tail lights are just to sexy!!!!
Indeed The best bro..I just bought and installed the best tail lights for the early 5th gens.. install video dropping this Thursday 💯💪🏾
WOW! A turbo or supercharger would push this car to some surprising levels
I know man! 😁🤙🏾💪🏾👍🏾
Best sounding v6 maro I’ve heard and I own a 2012 myself 🤣
Sounds better in person bro trust but thanks! 💯
I own a 2010 RS and this is the FIRST agreeable exhaust sound I’ve heard! 👍👍
That thing is insane. I have mine straight piped too, but only the rear mufflers, but damn yours sounds gorgeous
Check out my updated video when you have time man..
ruclips.net/video/j1HxNUudFRQ/видео.html
Damn I’d definitely own a v6 if it sounded like this
😂🤣 ✊🏾👍🏾💯💪🏾
Bro that sounds like a monster. Nice
Thanks man!
This is awesome man, you rarely see anyone camming the V6. My son's buddy has a ghost cam tune on his 2012 RS, but obviously not the same thing, although it sounds good. I have a 2010 SS with a GPI cam, longtubes, full bolt ons, etc. She's a beast - got some videos on my channel. Anyhow, good luck and keep it up man! Your car looks and sounds great!
Thanks bro! Yes its v6 but that a big reason why I love moding it because its obviously a rare thing to do. Plus I've had it since it was brand new and don't plan on parting with it. Indeed I will check out your channel bro.
Hell yeah you have given me hope. I’m doing this to my rs
Sounds really good. I also got my 2011 RS new and have yet to put anything into it. Been looking to start some mods. Recently been looking into LT headers and exhaust. Thanks for posting. I'll keep an eye on your channel.
Thanks Willie👍🏾 💯
That’s the best V6 Camaro I’ve ever heard!
Appreciate that man!!💯👍🏾💪🏾
First v6 camaro that actually doesn’t sound like shit
Gratitude man💯Check out some of of my newer vids when you get a chance 👏🏾✊🏾
Damn that sounds like a beast bro🙌🏽 just got my borla atak’s on last week I’m loving em
Thanks bro!! if you can post it a video of some sound clips so we can hear.
Kriese TV definitely will at some point man, the maro is getting some lowering springs and some new struts this week so I’m thinking of making a video after that’s done
Thats sounds amazing!!!!
Not bad for the V6 huh!! Thanks man.
@@KrieseTV best sounding v6 ive ever heard. Mines nowhere close to that.
@@threefireemojis3280 Gratitude man! ✔️ My latest video out. I think you'll like 💯.
ruclips.net/video/j1HxNUudFRQ/видео.html
Man this sounds amazing it brings back that old v6 sound the 94 Camaros had where it sounds like a v8 , how much did the whole setup cost you man , me being a student in college and owning a 2013 I want to do this but be financially smart lol
Thanks man!! Yes, that's what I thought. Those fourth gen v6 camaros did sound good especially if they were cammed with a nice exhaust setup!
If I were to throw a number out there, I'd say it was 6-9k including labor costs. I have a video going over the costs, parts etc. Check it out when you have time ✊🏾💯
We got the same Camaro you inspired me 🤝
Man…… that sounds soooooo awesome!!!!!
Def want to make my Miata sound like this when I put the LFX in there
LFX in a Miata bro wow that will be interesting!💪🏾🔥
@@KrieseTV mhm! It definitely will be. Just saving for the kit now. Have the engine sitting in the garage.
@@Eulsam_FZ what kit exactly?
That's nice sound I have a 2015 camaro myself. I want that sound
You now my favorite thread
I’m speechless 😶
Is it the headers and camshaft that really bring the v8 gurgle ? Sounds incredible hands down the best exuast video on the 5th gen camaro I have searched all of RUclips bro idk if they have terrible audio quality but I have been looking since my last comment I dropped
Appreciate that man💯. Yes its the headers and cams that bring it out bro💯💪🏾!
Big ups bruh....I just subscribed. I’am also a owner of a 2011 Chevy Camaro RS had it for about 2 yrs an love it to death... I was thinking of going the cammed route b/c of the beefy sound can you give me the pro an con of the sound in your opinion..... ohhh yeah an what song is that playing on your outro that sample is fire 🔥
Thank you bro!!! I got my maro brand new and barely got around to putting money in it within the last year. First, if you plan on keeping your car I would cam it. If your not planning on keeping it I wouldn't bother because it can be costly.. As far as the sound if your looking for more of a v8 sound out of your v6 then cams will help you achieve that. The outro is one of my songs I did on a 9th wonder beat. Thanks bro! Let me know if you have any more questions.
This is amazing mind telling me what other mods you have
Thanks bro! Try checking out my video "New performance parts are in" video. I list all parts and prices on that video.
So fire bro
Thanks bro! I love this car... Keep watching I have a lot of great stuff coming!!
Post more videos g...looking to put a cam in my rs soon
Dang homie yours sounds best so far I have 2014 how easy was it for u to cammed it and what cam did u go with? 💯
Thanks bruh! Mace engineering cams are the only cams for our v6 Camaro. I took it to my mechanic, and he did his magic! With your Camaro being a 2014 you will not be able to put headers on it. Headers are one of the main components that helps bring out the sound.
Good Post man. I have a 2011 RS with a MRT exhaust and cold air inductions. Looking for more sound and more HP. This looks like the route I’m going to take if I don’t decide to swap to a V8 engine.
Thanks bro!! you won't regret it. I still have a few more mods i'm planning on getting before moving on to my next build. Stay tuned.
@philip backer Paid around 2k. Also changed the timing and got my heads resurfaced..all included in the price..
Damn i have a 14 RS with bolt-ons except headers because that year doesn’t have headers sadly but I’ve been looking for a camaro with cams to decide if it’s worth it. After this video I think it’s worth it, it sounds like a monster bro love it.
Sorry for the long comment but I’m curious, is your car tuned if so, who tuned it?
Thanks bro! no worries i enjoy the feedback and answering any questions. Yes it is tuned. After your cams a tune is mandatory. I had it tuned locally at the dyno from a buddy of mine. Where are you located at?
Kriese TV I’m located in Houston tx
@@phantomgodly3318 ok
Holy shit!! Bro that sounds dope....but where can I get mine cam I lived here in Missouri.. I have a 2012 camaro rs v6
🤣🤣✊🏾. You'd have to search mechanics around in your area or do it yourself. Not to many people are as talented or willing to cam a v6. But yes if you plan on keeping it, go for it bro 💯👍🏾
Need long tube headers
Hey Kriese, I love what you've done to your whip. I just got a black 2011 drop top Camaro and I'm beginning my journey on modifying it. Can I pick your brain?
I appreciate that much man! Of coarse I'm here to help. Do you have a Instagram? It'll be more efficient to communicate there with me.💯
Man , sound's awesome, I see that you rebuild your whole engine,did you have to breaking your motor in ,400 mile ) before taking it to get tuning ,
Thanks bro I really appreciate it! Uum no. As soon as it was done I had it tuned. I hit the gas from time to time but I never was the type to dogg and drive my car hard you know.
@@KrieseTV thanks for your time,and your response, bro
@@stevegarcia6631 Thanks and Anytime bro! What kind of car do you have?
I like this One
Link to buy the cam?
I have a 2014 camero v6 I'm looking for a camshaft thar will deliver the most powerful sound and horsepower possible, Where did you buy your camshaft?
Mace engineering man. There the only cams for our v6 camaro. 💯✊🏾
What’s the cam called I got a 2013 lt would love to put this one on it
It’s called mace cams for the llt lfx
It sounds badass!!!!!what cams did you go with? I have a 2013 I wanna run this set up on it.
Thanks man! Check out this link. My whole setup is revealed.💯
ruclips.net/video/SPTrowOYzN8/видео.html
What year is it? I want to gut my cats but no one gas made headers for 2012 maros
2011.. Yes your right, my year was the last year that allowed headers😟
What all did you have to do to get it cammed?
A lot man. Check out some of my older videos and that will bring you up to speed.
Hey man I have a 2014 v6 camaro where can I buy one of these to make my car sound bad ass? ...please reply
Hi bro and thanks for viewing. Try checking out my video "New performance parts are in" video. I list all parts and prices on that video.
Very impressive. Chevy and Ford can make a good v6. Dodge can’t . Nice sound have fun
Thanks buddy! I love the v6!
dude can this be done with a 2014 lt?? this is crazy good
Yes it can !
@@KrieseTV holy smokes. what was the price for ur set up>????
@@stay.alive.00 Alot! I have everything listed in prior vids. Check them out bro. PS. I wouldn't recommend this if your are not keeping your car though. I'm keeping mine which is why i invested in this..
What's louder flowmaster super 10 is what I have is borla exhaust better sound
Can you do a 0-60 video please
Indeed👍🏾💯
Hey quick question, I’m looking into getting this exhaust setup but I have the LFX (wanted to get ARH high flow cats catted, then borla atak) do you think it would sound similar to this ? Or no because your car is called which makes it even louder?
What’s the tire size 245/40/20? Thank u I appreciate the video
265/30/r22. Thanks bro
Man im so confused when it comes to cams not sure which way to go I have 2010 v6
First, What are you looking to achieve with your vehicle? Cams are typically not marketed with the v6 camaro leaving little or no cam options because people tend to just go with the v8 which have numerous selections of cams. The only cams out there for our v6 that i know of are from Mace Engineering. These are from Australia. Hope this helps bro.
What’s the website I’m trying to get a stage 3 cam for my camaro rs
Mace engineering is the company man.
Check out my other video. I list all of the parts in it.
ruclips.net/video/SPTrowOYzN8/видео.html
Nice
I have a gen 5 Camaro where and what headers I can buy for my v6
Where did you buy the cam I need one for mine
Which cams did you go with? Also do you have 3 in exhaust?
Macs engineering cams. And I have 4.5 in tips.
I have 2010 camaro whats your exhaust set up
It sounds good but I don't really hear the cam it's not very choppy
Thanks man. I'm aware of that. The v6 doesn't and Will NOT lope like the v8 to be clear and I already knew it wouldn't, however I was aiming for a v8 sound similar to a 4.8 or 5.3 liter and I definitely achieved that.
@@KrieseTV it sounds good but definitely don't sound like a 4.8 or 5.3 I daily drove a few early 2000s pick up trucks with both of these motors straight piped and I can guarantee you that this doesn't sound like them but it does sound good
@@Back_door_bandit_98 I beg to differ. When it's at idle and at low Epms 1-2k I love it lol! But different perspectives is always good much love and I definitely appreciate you family 💯
@@Back_door_bandit_98 check out this video if you haven't already bro. ruclips.net/video/ZCYkYT6i8fE/видео.html
@@KrieseTV yeah definitely at idle and low rpms but over 3k it sounds high pitch but yeah if I had a v6 I would definitely do this I drive nothing but trucks but I recently got a new accord touring 2.0T thing is stupid fast for a turbo 4 but the sound just isn't there
god damn
What cam did you get?
Mace engineering cams.
How does it pass inspection if your removing the cats
There is no emissions testing in my area🤟🏾
How much the camm was? Where you get it done from I think I’m Gonna do my Rs like that
What kind of air system is in that bad boy
A dynamic air intake bro
What inch are the rims brooo amaizingggg 😲💪🏻💪🏻
22s man. But im about to downsize.
How much horsepower you making bro? Sounds great
Thanks! About 320-330 rwhp. Nothing major 💯
Sounds great, but what kinda cam? And whats the difference in performance cammed vs stock?
Stock 312 hp 278 torque.. now it's around 345hp 300 torque..
ruclips.net/video/SPTrowOYzN8/видео.html
All Cam info listed in this video.👍🏾
Yo I got an LFX impala, what cam is this and is there a link for it?
What’s the link to the upgraded parts
All parts that I purchased are in my "New performance parts are in" video.
Kriese TV so. You telling me in the video you saying where you purchased
@@yungpesso_ Yes everything is listed in the description column of that video.
Hey By any chance can you somehow send me the link to the cam and the atak exhaust please because I can’t find it anywhere and looking to buy some here in a few days
Sure. Here's the link to the borla mufflers.. www.ebay.com/itm/Borla-11788-Axle-Back-ATAK-Exhaust-System-10-13-Chevy-Camaro-SS-6-2L-V8-/324568089957?_trksid=p2349624.m46890.l49286
Cams can be found at www.maceengineering.com.au/en_US
💯
yo were you get your cam from
All my cam info you can find on this video bro. Thanks! ruclips.net/video/SPTrowOYzN8/видео.html
Idle sounds like a 2nd gen Cummins 😂😂😂
Interesting never thought about it that way.. anywho, doesn't sound like the average v6 so Its good😂🤙🏾
How much did it cost.
Hey bro how much was it to cam your car?
between 2-3k bro. That's will all parts and labor. You also would want to know a good mechanic. Not a bunch of mechanics are able and more so willing to cam a v6..
What are the name of the cams or where did you get it the cams
I have all parts I got in my performance parts video man💯
where’d you get the cam? I have a 5th gen and want to get one for sure
Mace Engineering bro.
Oh shit they're mace cams??
Hey boss where did you get your cam done at ? And how much ?
Hey bro. I got my cams installed at my mechanic located in Peoria AZ. I got new valve springs, arm rockers, lifters, my heads taken out and machined while I got my performance cams installed. I basically rebuilt the top half of my engine. With all parts and labor it cost me about 3k.
Kriese TV gordo_aguirre_
Kriese TV or if it’s cool if you call me, 4807407373
@@anthonyaguirre9507 I got you bro.
What cam kit did you put in your car I’m wanting to do it to mine
ruclips.net/video/SPTrowOYzN8/видео.html
Do you know about how much power you gained from the cams?
Its a bout a 20-30 hp gain with the cams alone. With the cams and other upgrades i've done this far, it's pushing a little over 360 at the wheels. I've had my car for 10 years and the cams are a HUGE difference!! I have other videos showing all parts and mods I've done so far.
Kriese TV awesome man, I got an LLT motor in mine too and looking at doing a similar set up and everything so I was curious. Also, is it the mace cams?
@@cameroncoker7517 yes mace cams bro.
Kriese TV damn with 360 wheel you gotta be at 400 at the crank
How much you paid for the cam and installation
At the time the cams cost roughly 560 and the labor was around 3-4k if I'm not mistaken man.
What cams and tune did ya go with?
Mace Engineering cams with a custom tune buddy!💯👍🏾
Where’d you get the cam
Mace engineering man.👍🏾
What cam did you go with? Will it work on the 16 Rs?
I believe they have cams for the 2016.
Try www.maceengineering.com.au/en_US
What rims do you have on
@Manuel Estrada Black machined Irocs
I need link to the cam bro
Mace engineering bro. A quick Google search and you'll find em. They are the only company known to produce the cams for our cars💯
Where did you get the cam
Mace engineering
What type cam
Mace Engineering. 4 total, 2 exhaust and 2 intake.
And what's your set up?
✔️ out some of my older vids man. All that has been done is vlog 💯.
Is this the trifecta ghost cam or a legit cam in the engine
Legit cams from Mace engineering.. check out my prior videos. I have footage of the engine disassembled etc.
Please send me all the mods you did. I'm ready to buy them all
ruclips.net/video/SPTrowOYzN8/видео.html
✔️ This video out. All info is listed in it along with commentary.👍🏾
1 year after cams being installed video.
ruclips.net/video/j1HxNUudFRQ/видео.html
@@KrieseTV thank you!!
@@KrieseTV how much was labor cost?
@@coltonhozjan3833 1500-2k
Can you lmk what I’ll all need to cam mine
No Problem. I have all of the parts listed in my "New performance parts are in" Video. Check it out bro.
Kriese TV thank you man!
@@mlyricaldoc6292 🤙🏾💯 hit me up if you have any other questions.
What stage is ur cams and where’d you get it from
Maceengineering.com man. All info is in this video..👍🏾
ruclips.net/video/SPTrowOYzN8/видео.html
What do I gotta buy to make mine sound like this?? PLEASE GIVE ME A ANSWER
Lol what year camaro u got
@@arnoldbass8709 2013
Check out this vid. I go thru all parts I bought to get this sound. 💯
ruclips.net/video/SPTrowOYzN8/видео.html
@@epic_m1681 You got the same year as mine yours want technically sound like his because the LFX has a down pipe meaning it’s 1 hole 🕳 on both side of the engine while the LLT engine got 3 on both sides
Yes, it'll sound similar but not quite the same without the headers.
You need cherry bomb fast eww bro It the glass pack and re tip it with the 5 inch and you'll need two
What’s the name of the cam
Cam info provided in this video man.
ruclips.net/video/SPTrowOYzN8/видео.html
What kind of cam u have
Mace engineering cams. The only cams for these v6 cars.
Hey man where did you order your borla atak mufflers?
I ordered them from Amazon back in 2019
Was the the round ones for the as or was they the oval/ square ones for the v6? I got one and I’m struggling with trying to get it to sound as good as yours. It’s cammed, long tube headers but I just need to know which mufflers to order because they ain’t cheap and don’t wanna make a mistake. Let me know asap excited to get the sound you got, got alot of raspy and I hate it.
Is there any way you could look them up and send me a pic of them? It would be greatly appreciated!!
@@leelynnwalker9617 check this link out. This what I bought 2 years ago. It's a little more pricey than when I purchased but we'll worth it. Hope it helps!! Also this is 2.5 in diameter piping like the v8, not the 2.25 diameter like our stock v6s.
Borla 140356 ATAK Stainless Steel Aggressive Cat-Back Exhaust System a.co/d/73rqYQO
Ok bet,thanks man and you don’t post anymore?
Bro that a v8 not a v6
Where U order your pipes from ?
Amazon bro
@@KrieseTV thank you
Catless cat back?
Yessir
Do you have a tune on it?
Yessir! But I need to get a updated tune. I've done other performance mods since this video.
@@KrieseTV ok that’s what’s up. I’m working on mine and just getting some ideas.
do you know how much hp you gained?
about a 20-30 hp gain from the cams..
You’re not completely catless are u??
Yes.