How To Install a Z1 Leveling Kit on an A61 Titan

Shop Now at: www.z1offroad.com/z1-products...
Level your Nissan Titan using Z1's Front Lift Spacer. This spacer is installed between the front shock mount and the frame, providing your truck with up to 1.6'' of front lift. Installation of the spacer improves visual appeal by leveling the front of the truck while increasing ground clearance for better tire to fender clearance while improving off-road performance. The Z1 Leveling Kit is easy to install and can be done without disassembling the front shock, making it the easiest lift you can install on your truck! Because the spacer is installed outside the strut assembly, your truck will maintain its factory ride characteristics and quality with no added spring pre-load or harshness.
Z1 lift spacers are manufactured from 6061-T6 aluminum, the highest temper grade available for increased durability in all conditions. Each spacer is finished in a black anodized coating with laser-etched Z1 logo and include all new hardware.
Heavily loaded trucks or trucks with sagging or worn front springs may require an additional spacer to level the truck properly. Because we commonly see this on higher mileage trucks, we manufactured a +5mm spacer for fine-tuning that can be purchased HERE!
Total Lift:
Pro4X Models
Front - 1.25''
Non-Pro4X Models
Front - 1.65"
Features:
Easy to install
Fits 2WD and 4WD
Improves visual appeal
Maintains factory ride characteristics
Increased ride height and ground clearance
Compatible with any front shock or coilover
Fits:
2016+ Nissan Titan
Does NOT fix XD models

[@ulisesocampo2]

By far, the best explained video out there. Thanks, man. Got the link to the rear lift blocks install??

[@PRO4XKEV]

Always get a new wheel alignment when doing this.

[@robertogarza5873]

What does it mean after you put the 3 inch lift kit you start hearing noise when you hit bumps from the front end and you hear a tump when accelerate?

[@JUSTinTx254]

How much would your shop charge to do this just labor? I have to take it to a shop so it doesn't void warranty. 🙏🏼

[@pagspro972]

So I put my 2.5 inch spacer kit on a 2023. I had to rotate the strut assembly 180 degrees to get the spacer studs to align with the factory holes in the truck. Is that a common thing to do?

[@z1off-road]

Yep

[@christopherburke4549]

Does that leveling kit fit a 2021 Nissan Titan pro4x

[@z1off-road]

2016+ Nissan Titan
Does NOT fix XD models

[@christopherburke4549]

Can I use my factory upper control arms?

[@z1off-road]

We recommend installing aftermarket adjustable upper control arms on Pro4X models. Trucks with stock arms will notice contact between the control arm and coil spring bucket at full droop. Here is a link to our Z1 Upper Control Arms for your Nissan Titan: www.z1offroad.com/z1-products/z1-off-road/nissan-titan-front-upper-control-arms-by-z1-off-road-p-40601.html

[@nicknadeau5538]

@@z1off-roadwhat about 2wd models? Thinking of getting this for my 21 sv 2wd