I have a 2013 Silverado extended cab with a Dura Max made at Ft. Wayne. Other than a recall for the heater assembly in the DEF tank which GM fixed under warranty, I have had zero issues with my pick up. I realize it is hardly broken in at 120,000 miles but its been great so far. I"m sure it will be humming along at 250K. Always wanted to thank the folks who made my truck. If one of the folks who work at Ft. Wayne reads this, Thanks. Go GM. Go UAW. Go America.
It’s a 2500 and most definitely made in Indiana. Sticker in the door confirms it. Extended cab not crew cab. In 2013 I do believe the extended’s were made in FW and crew cabs in flint.
I have worked for a GM stamping and assemblies supplier for over a decade. It was awesome to watch the video and be able to see where some of our parts go on the vehicle.
Man oh man. I installed some of the first Ethernet Back Bone cable, in this plant while it was under construction. I worked for Digital Equipment Corporation, as an installer. My Sliverado comes from the same plant. If you have never been in an assembly plant, and see how it works you have missed a sight to be sure. I pass this plant, south west of Fort Wayne, on my way to INDY, every Labor Day weekend, on the way to the U.S. Nationals. I think about that every time. WOW!
I bought my 2015 Chevrolet Silverado BRAND NEW back in February 2015. What a GREAT 👍 TRUCK! Thank You America and to the Fort Wayne Assembly Plant!!!! NEVER had one Problem with it!!! 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸💥💥💥🇺🇸🇺🇸🇺🇸🇺🇸
Me too. I actually started at Electromotive Divison Of GM, LaGrange ILL. making Locomotive Train. I went to Janesville, WI. in 1984 then to Ft. Wayne In. in 1987. I retired on 3/1/2005. Lots of fonds memories. Union Workers are some of the most charitable givers in America. Being called lazy, and lowe-lifers by jealous detractors, and even beneficiaries of our good deeds notwithstanding. NOTE Ivan L. Flynn is the retiree, not Yvonne.
What a masterpiece video, it's good / neat to see how it all comes together at the GM Fort Wayne, Indiana truck assembly plant, & it's all in full effect/ action! wow... Those robots are phenomenal, working hand n hand on one Accord, I love the windshield robots though! matter of fact the whole assembly process is a thing of beauty to watch, add in the human touch, and it really makes it special, totally amazing! my 1995 Chevy Silverado reg. cab stepside which I still drive today in 2020, with 241,754 miles, was built at that plant, in May of '95, thanks for sharing the video.✌👍👍
You did horrible work. The rear suspension on these trucks and the 8 speed transmission is garbage is both my 2019 RST and 2019 LTZ Z71. Last GM trucks I'll ever buy. 💯
@@jadedjay7861 Don't know why you sound so angry. A car is built by thousands of engineers and one engineer can't change the whole story. You don't know me and don't know my job. So if you have any comments about GM, please make comment in the right place.
My dad worked here in 1987-88. Really enjoyed the people and the fairly new plant at the time. Got in at Chrysler Kokomo in 1988. A lot shorter drive for him!
My 2012 2500HD was built here. It just turned 100K, and it has held up well. I’ve had no problems.I give you guys on the line credit for this. My family is a GM family. They all worked at the New Departure Hyatt bearing plant in Bristol, CT.
I have a 2012 but it is just a 1500. It only has 48,000 miles. I have a 1998 Silverado that is the 2500HD if I need to haul something. The 2012 was garaged in Ct for a year after I bought it in Idaho. Then I drove it home to Alaska pulling a travel trailer.
The assembly process isn’t where the problems are usually born. Screwing parts on over and over is not rocket science. The recalls are born in the design as well as subpar components. American workers can assemble as good of a product as any other country can which is why Toyota, Honda have succeeded in assembling vehicles here.
I weld every exhaust on these trucks down the road from this GM plant in FW at Faurecia so crazy to think I’ve probably welded every exhaust on that truck 🤯 proud to work automotive
@@kaylazalansky5715 Lol Yeah GM has very poor build quality, very unreliable, way too overpriced. It seems like GM buys it's tools, material from the Dollar store😂😂😂🤭🤭🤭
Sopir kowal kowad kowau kirim antarkan mobil baru 6 unit pandugo rungkut ke surabaya oke RI biruh Jalan toll rungkut bandung pandugo rungkut ke surabaya oke Ri biruh Pelabuhan perak T N I A L surabaya oke RI biruh merah kuning ke surabaya RI USA RI
Best vehicle I ever had was a 2003 Yukon. I drove it 14 years, 186,000 miles mostly in the Florida Keys and sold it for good money! One repair only, the fuel pump!
My '02 Silverado and my '14 Sierra both came from Fort Wayne Assembly. Took a tour of Ford F series truck assembly in Dearborn, but all they showed us was a few final assembly steps and QC just before they drove them out.
When I was a student and worked at GM for the summer and still worked at my PT job in a grocery store 21 hrs/wk, I worked in Parts & Service, then Security, then the Truck Plant all in Oshawa before getting into IT at GM.
I really like to see the vehicle truck built in AMERICA. I own a ford 2007 f150 built in AMERICA and i am proud of that fact . It has never let me down. It has 47.000 miles on it. I am german by birth but moved to america when i was 3. My father bought his chevy truck and it was great!!!!!!
@@shanewilson8728The 1986 Chevy was just sitting for a couple years and one day I started working on it and got it running again. I do have a newer Ford truck, same thing too lol. I enjoy working on them, maintaining them so I don't have to keep doing trade-ins. My 1986 Silverado is almost done to completion, next project is my 1971 Chevrolet C-10 that I inherited from my late Dad which I already bought some stuff for it.
I’m in the Machinists union. I appreciate my union I just don’t appreciate how they defend lazy workers. I did the work for two people today and I resent it.
CRC heavy duty corrosion inhibitor . if you can be bothered to take an hour out of your life every three years to spray it on the underside you won't ever have a problem . 15 NY winters and counting .
My Dad did this kind of work all his life back when the working conditions were more horrible for all factory workers. He is 79 years old now. it always bothered me how hard he worked and i know he suffered all those years just to support his family. To me ,Life is way to short to work like a Slave. There is easier ways to make money.
What a contrast between the degree of automation in this vehicle assembly plant and the BMW assembly plant. Is it any wonder we keep falling further and further behind in manufacturing? We better step up our game and fast.
People who ordered trucks used to come through, as their truck was being built. So nice to see and talk to them! They came from all over the country, to see their truck being built, and drive it home!
I miss building vehicles something about it coming in one side of the building as just a chassis and driving off the line a complete built vehicle at the other end is just satisfying
@@SDRacing88 I hardly remember that far back lol, it's 3 times the size now with 3 shifts around the clock 6 days a week and sometimes 7 days a week. It is the largest assembly plant in America, always hiring too.
Awesome 42 years, I bet you don't do shit now but walk around, talk to people, and bitch and complain. Meanwhile a younger guy who has a family is working as a temp to have the same opportunity. Tell me how hard is it to get your can through the turnstile?
My 2016 3/4 ton 4 wheel drive 4 door 8’ box was manufactured in that plant. I also own a Chevy 2005 one ton 4 wheel drive 8’ ( bought it brand new, has 200,000 plus miles and still runs great ) and a Chevy 1985 1/2 ton 4 wheel drive long box. Chevrolet “ Like a rock “
Most people can afford a WT model, but no one buys one. They want a crew cab, 4wd, and V8 even if a regular cab 2wd V6 would do everything they'd ask for.
@@dutchman063 I have been to this plant a lot. What they get for the little work they do is a slap in the face to the regular worker with a skill. I hope soon it all goes automated.
Was in old Ford Plant in Milpitas CA doing some construction in early 80s... if you have not been in a plant this size you have not seen anything.. So huge they ride bikes in there to move around.
Hats off to these hard workers Always owned GM trucks but I am sorry the 2020 body style is a total disgrace to Silverado and Sierra I have a 2014 Silverado I will keep it on the road as long as I can till they change this style I will go to a different brand
I will never own another new GM product. I bought my first new chevy 4x4 truck in 1978 my 2nd in 1987 my 3rd in 2000 when it got wrecked my bought my 4th in 2004. drove it home 8.9 total on the truck and it never left my driveway again under its own power. after fighting with Gm dealer 6 days later when they did come to look at it the idiot locked the keys in it 3 times messed up my paint job and the 3rd time just busted the wide window out of it. I told the you just bought this truck back. after I got a lawyer involved I got my money back and been with ford ever since. but when you give 20k CASH for a truck and drive it 8.9 miles and they don't want to fix it. I think it was because I paid cash. and I called them with in 20 minutes of leaving the dealer. but I liked the video its cool how it all works.
Lies. GM has an obligation, and a promise. As well as the union would have never allowed it. Next time, speak to Corporate, not your friendly Chevrolet dealership. The dealership is not authorized or given clearance. As far as you paying cash, GM could careless. You are still a valued customer, no matter how you acquire a GM product.
My 2006 GMC Sierra SLE was built there, 199,9XX miles now. Got it with 357 miles on it and only thing that I did not like is the thin roof with no bracing to stop it from vibrating in a high wind or wave shock from a semi.
@@Mr.Beastforpresident Thanks I had not seen that, Good old uper management How could any company operate with that debt,? . I know to big to fail. Yikes.
real cool stuff, i believe we need to thank henry ford for the way stuff was made, also he may have been 1st employer to give employees 8 hour shifts and weekends off
@@johncholmes643 There is a 1992 Silverado in my driveway with 267k miles and it starts and drives everyday. It's had its transmission rebuilt and has its share of problems, but I'm confident it will get me to work every day. It will still be running long after these trucks in this video are in the junkyard.
Sooner or later ALL these plants will be 100% automated, enjoy your job while you still have one. Companies don't need to pay robots, no sick leave, and no wages.
It won't be long now, either. It's pretty obvious just watching this footage. Save your money now while you can. Like 50% of your income, not $187 bucks a month.
The problem is that if every job becomes automated then, nobody will be able to buy products or services. How do you sell vehicles or any other product when nobody has jobs because of automation. It going to bite them back in the ass.
Oh yes and please buy Nissan. But come back when you have to replace your transmission because of faulty hoses causing transmission fluid and coolant to mix
I've owned a 1995 GMC Sierra 1500 V8 and I currently own a 2006 Chevrolet Silverado Z71 1500 V8 both were assembled at the Fort Wayne Indiana assembly plant. I have designs on purchasing a new 2023 Silverado V8 and I am willing to travel to Indiana to get it. GM can keep that 4 cylinder nonsense. No offense to the hard working folks in the Silao Mexico assembly plant, but go Hoosiers!
I've been a Dodge guy for the last 25 yrs. That said, the front end of the GMC 2500 HD is like a Terminater coming after you. It's just bad ass no matter how you slice it.
Well, you will pay MORE for the GMC and they are built on the exact same assembly line one after the other. There is NO difference in them except the PRICE. Put Chevy badges on this one and put GMC badges on that one. Very clever marketing. Two vehicles that are EXACTLY the same and people think they are "different!"
Great memories. It is remarkably how well organized the assembly process must be to function properly. In most cases it does function properly and the line keeps rolling along. Some look at this video in awe. That may be because assembly plant processes and the propitiatory equipment needed takes years to develop and successes are then built upon successes. Only then can you produce a quality product in this manner..... Other who view this video just want to bash the working man or the product. As long as there are successes there will be tribalism or jealousy. It's human nature. Believe me there is nothing to be jealous of. Working on an assembly line is not a pleasant job. I respect any one who can do this day after day after day.
Ive owned gm ever since I started driving but now 70k for a pickup like what I have now that's 15 years old idt so there making the vehicles cheaper and cheaper by the year but upping the price pretty soon gm will be like John Deere you'll have to take your vehicle in to dealer to get it repaired due to the software issue
Wanna know why sales are down? b/c people can't afford to buy these monstrosity trucks anyone. bring back an affordable base model Colorado standard cab. that's what we want
That's why the Frontier is the last true simple small pick up. But they're doing away with it in 2021 or 22 I think. But the new one may come with a small Cummins option I think.
I have a 2013 Silverado extended cab with a Dura Max made at Ft. Wayne. Other than a recall for the heater assembly in the DEF tank which GM fixed under warranty, I have had zero issues with my pick up. I realize it is hardly broken in at 120,000 miles but its been great so far. I"m sure it will be humming along at 250K. Always wanted to thank the folks who made my truck. If one of the folks who work at Ft. Wayne reads this, Thanks. Go GM. Go UAW. Go America.
🇺🇸 🇺🇸 🇺🇸 🦅 ⚙️ 🛻 🍔 🍟 🇻🇮🇵🇷🇺🇸🇺🇸🇺🇸
If it's a 2500 or 3500, it was made in Flint, MI. 1500's are made in Ft. Wayne
It’s a 2500 and most definitely made in Indiana. Sticker in the door confirms it. Extended cab not crew cab. In 2013 I do believe the extended’s were made in FW and crew cabs in flint.
I have worked for a GM stamping and assemblies supplier for over a decade. It was awesome to watch the video and be able to see where some of our parts go on the vehicle.
Man oh man. I installed some of the first Ethernet Back Bone cable, in this plant while it was under construction. I worked for Digital Equipment Corporation, as an installer. My Sliverado comes from the same plant. If you have never been in an assembly plant, and see how it works you have missed a sight to be sure. I pass this plant, south west of Fort Wayne, on my way to INDY, every Labor Day weekend, on the way to the U.S. Nationals. I think about that every time. WOW!
I bought my 2015 Chevrolet Silverado BRAND NEW back in February 2015. What a GREAT 👍 TRUCK! Thank You America and to the Fort Wayne Assembly Plant!!!! NEVER had one Problem with it!!! 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸💥💥💥🇺🇸🇺🇸🇺🇸🇺🇸
I transferred to this plant in 1986 from Wisconsin plant and built the first truck. I retired from there in 2007,great place to work!
u built the first 86?
@@shawnmcclure7282 yes I did.
It’s like a miniature city. Everyone’s doing something within the factory.
Me too. I actually started at Electromotive Divison Of GM, LaGrange ILL. making Locomotive Train. I went to Janesville, WI. in 1984 then to Ft. Wayne In. in 1987. I retired on 3/1/2005. Lots of fonds memories. Union Workers are some of the most charitable givers in America. Being called lazy, and lowe-lifers by jealous detractors, and even beneficiaries of our good deeds notwithstanding. NOTE Ivan L. Flynn is the retiree, not Yvonne.
You did a great job on my '90 454SS.
They deserve every penny they get.
Yep, because they'll soon be making ZERO. 😂😂😂
What a masterpiece video, it's good / neat to see how it all comes together at the GM Fort Wayne, Indiana truck assembly plant, & it's all in full effect/ action! wow... Those robots are phenomenal, working hand n hand on one Accord, I love the windshield robots though! matter of fact the whole assembly process is a thing of beauty to watch, add in the human touch, and it really makes it special, totally amazing! my 1995 Chevy Silverado reg. cab stepside which I still drive today in 2020, with 241,754 miles, was built at that plant, in May of '95, thanks for sharing the video.✌👍👍
Involved in the powertrain system design 2 years ago for this T1XX truck, so happy to see my designed part in the production in this video.
You did horrible work. The rear suspension on these trucks and the 8 speed transmission is garbage is both my 2019 RST and 2019 LTZ Z71. Last GM trucks I'll ever buy. 💯
@@jadedjay7861 Don't know why you sound so angry. A car is built by thousands of engineers and one engineer can't change the whole story. You don't know me and don't know my job. So if you have any comments about GM, please make comment in the right place.
There's a heck of lot more to it than what the video shows. I'd love to see the full version.
My hometown Fort Wayne, Indiana!
I used to drive past this plant.
My dad worked here in 1987-88. Really enjoyed the people and the fairly new plant at the time. Got in at Chrysler Kokomo in 1988. A lot shorter drive for him!
The assembly line is amazing. Those robots are something else. Gee a new Silverado is a must have vehicle. Cheers 🇦🇺
My 2012 2500HD was built here. It just turned 100K, and it has held up well. I’ve had no problems.I give you guys on the line credit for this.
My family is a GM family. They all worked at the New Departure Hyatt bearing plant in Bristol, CT.
I have a 2012 but it is just a 1500. It only has 48,000 miles. I have a 1998 Silverado that is the 2500HD if I need to haul something. The 2012 was garaged in Ct for a year after I bought it in Idaho. Then I drove it home to Alaska pulling a travel trailer.
My 2012 2500hd was also built there It just turned 31000 miles the other day
And here is where all the recall magic happens!
We're actually witnessing recalls being born!
Lol
Its hard not to mess up on something you do around 600 times per day, 4-6 days a week, and 11 months per year.
The assembly process isn’t where the problems are usually born. Screwing parts on over and over is not rocket science. The recalls are born in the design as well as subpar components.
American workers can assemble as good of a product as any other country can which is why Toyota, Honda have succeeded in assembling vehicles here.
*Dan halen from squidbillies voice* Ladies and gentlemen, i present to you: PLANNED OBSOLESENCE
6:49 the robot applied weather caulking is amazing
Body Seam Sealant/Sealer
I weld every exhaust on these trucks down the road from this GM plant in FW at Faurecia so crazy to think I’ve probably welded every exhaust on that truck 🤯 proud to work automotive
Well sir your welds are garbage I can’t even tell you how many failures I see at the dealer I work for lol
Kayla Zalansky yeah unfortunately not many people take pride in their work like I do so their welds aren’t like mine 🤷🏽♂️
👍
@@kaylazalansky5715 Lol Yeah GM has very poor build quality, very unreliable, way too overpriced. It seems like GM buys it's tools, material from the Dollar store😂😂😂🤭🤭🤭
Sopir kowal kowad kowau kirim antarkan mobil baru 6 unit pandugo rungkut ke surabaya oke RI biruh
Jalan toll rungkut bandung pandugo rungkut ke surabaya oke Ri biruh
Pelabuhan perak T N I A L surabaya oke RI biruh merah kuning ke surabaya RI USA RI
Best vehicle I ever had was a 2003 Yukon. I drove it 14 years, 186,000 miles mostly in the Florida Keys and sold it for good money! One repair only, the fuel pump!
Those LS motors hold up like no other
same my chevrolet trailblazer 2.8 duramax diesel in phillippines chevrolet less expensive parts compare ford
How much was it, mines been buzzing so I'm sure it's time for a new one very soon
Been in a few ford plants delivering parts. I would always be mesmerized watching what i could see. Would love to do a full plant tour.
If this video gave you a rush, then you, too, are a genuine gear head.
Hell yeah it does.
Imagine the cars built 100% by hand. There is few out their.
@@pzpinkslip123 I've seen countless one off cars hand built and that's very cool, but this is a different thing, altogether.
Peter Z supercars exotics such as Ferrari’s I think I could be wrong
I was trying to figure out what they were making. I think it’s the 1/2 ton trucks.
My '02 Silverado and my '14 Sierra both came from Fort Wayne Assembly. Took a tour of Ford F series truck assembly in Dearborn, but all they showed us was a few final assembly steps and QC just before they drove them out.
because the start of a ford plant is a junkyard
My 1990 Silverado was built there . Best truck I ever had . Had it 20 years .
living in a desert 🤠❤️👍🏻 good year and truck -
GM PRODUCTS ARE JUNK DUDE WHO U TRYIN TO FOOL
Bet the new ones wont last that long.
Where is it now? People like to pay new vehicle taxes, insurance is high on new stuff and it does the same as 40 year old truck.
When I was a student and worked at GM for the summer and still worked at my PT job in a grocery store 21 hrs/wk, I worked in Parts & Service, then Security, then the Truck Plant all in Oshawa before getting into IT at GM.
I'm sorry.
b conover what are you sorry about?
Thanks for sharing. It was neat to see a truck being built. I know it is not the whole process. But it was still neat.
I really like to see the vehicle truck built in AMERICA. I own a ford 2007 f150 built in AMERICA and i am proud of that fact . It has never let me down. It has 47.000 miles on it. I am german by birth but moved to america when i was 3. My father bought his chevy truck and it was great!!!!!!
I appreciated nobody talking over the video, nice change.
And NO dreadful music blaring in the background.
My last 2 trucks I've had came out of Ft. Payne.
Both still going strong with eavh having over 330,000 miles.
After watching this video, I'm gonna go outside and work on my 1986 Chevrolet Silverado 4x4 Longbed 👍👌🇺🇸🌎..
I'm guessing that your poorly made Chevrolet Silverado is constantly breaking down. You need to get to a local Ford dealership immediately.
@@shanewilson8728The 1986 Chevy was just sitting for a couple years and one day I started working on it and got it running again. I do have a newer Ford truck, same thing too lol. I enjoy working on them, maintaining them so I don't have to keep doing trade-ins. My 1986 Silverado is almost done to completion, next project is my 1971 Chevrolet C-10 that I inherited from my late Dad which I already bought some stuff for it.
They need to have a reunion.. I worked there from 88 to 92.. made some friends.. Manny, Al, Carol and others..
Great Video !! Wow ... I work for a company making parts for GM , Ford , Fiat , BMW Nice to see how they put parts together !! Tks for Sharing
Too all the brothers and sisters on the line keep up the good work👍screw all the ignorant haters out there
I’m in the Machinists union. I appreciate my union I just don’t appreciate how they defend lazy workers. I did the work for two people today and I resent it.
Antonmursid
🇮🇩🙏🙏🙏🙏🙏
Didn’t see the part were they install the rust on the frame. Is that dealer installed?
CRC heavy duty corrosion inhibitor . if you can be bothered to take an hour out of your life every three years to spray it on the underside you won't ever have a problem . 15 NY winters and counting .
No just "CHEAP" import steel.
All the undercoating in the world will not stop it from rotting away from the inside out
Dr. Westside Can you spray it on exhaust pipes? Must it be painted?
I live in the South but bought a truck that traveled to where it snows with salt
@Jeff x think your talking about Toyota
Before this, I thought the Subway sandwich build video was amazing.
The industrial engineering is just extraordinary.
I felt like i was watching them build my 2019 crew cab trailboss very cool
My Dad did this kind of work all his life back when the working conditions were more horrible for all factory workers. He is 79 years old now. it always bothered me how hard he worked and i know he suffered all those years just to support his family. To me ,Life is way to short to work like a Slave. There is easier ways to make money.
please share the secrets master
@@joseAlvarado-jw4gw if you quit spending money fast...you dont have to make it as fast either. SIMPLE SOLUTION!
What a contrast between the degree of automation in this vehicle assembly plant and the BMW assembly plant. Is it any wonder we keep falling further and further behind in manufacturing? We better step up our game and fast.
Thank you for real sounds.
Both my GMC Sierra's were assembled their. Both great trucks.
I feel comfortable saying my truck or a piece of my truck is in this video
People who ordered trucks used to come through, as their truck was being built. So nice to see and talk to them! They came from all over the country, to see their truck being built, and drive it home!
Karen Baker wish I could send someone who works there a picture ..... I would like to say the specs of my truck are rather unique
I miss building vehicles something about it coming in one side of the building as just a chassis and driving off the line a complete built vehicle at the other end is just satisfying
I have a 1979 Chevy truck and puts this new truck to shame it still runs this day I think the gas miles is about the same
I had a 1977 Silverado that got the same gas mileage as my 2005 Silverado.
So sad what GM has become
@@A-Z__124 ain't GM's fault. The EPA needs to pull their lower lip over their head and swallow.
Your talking about a 79 that has somewhere between half or a third of the horsepower and weighs less having the same mpg. Wow must be proud
@@GreatLakesLogger IsIHi
@@GreatLakesLogger I blame the Democraps. Watch gas will be 4 bucks a gallon this summer.
I love that these guys always seem to be looking somewhere else when assembling their part, like meh whatever it's just the engine 🤷♂️😂
@Sky Pirate I would really say fords crap is not any better now Toyota on the other hand yep.
As someone who works on the assembly line… when you’re doing 1 job for 8 hours for months even years at a time…😂 you get quite used to it.
Made in America 💪🏻💪🏻💪🏻 by my neighbors. 🇺🇸🇺🇸🇺🇸
I just got a job at the bedford powertrain plant don’t know what shift yet but i plan to go u til retirement so far it’s great
Almost identical to the Arlington, Texas SUV assembly plant that I have been at for 42 years now.
I toured that plant in 91 or 92 back when the Caprice was being built there.
@@SDRacing88 I hardly remember that far back lol, it's 3 times the size now with 3 shifts around the clock 6 days a week and sometimes 7 days a week. It is the largest assembly plant in America, always hiring too.
Did you see the wearing the Dallas hat in paint Dept.
@@SDRacing88 When we built the LAST Monte Carlo the plant kept it for their indoor museum a white SS with T Tops
Awesome 42 years, I bet you don't do shit now but walk around, talk to people, and bitch and complain. Meanwhile a younger guy who has a family is working as a temp to have the same opportunity. Tell me how hard is it to get your can through the turnstile?
GM MAQUINISSIMA PODEROSISSIMA PERFEITISSIMA DE ALTISSIMO PERFORMANCE, DESEMPENHO, MUITISSIMAS QUALIDADES SUPERIORSISSIMAS, MUITISSIMAS TECNOLOGIAS AVANÇADISSIMAS, RESISTENTISSIMO, LUXUOSISSIMO, CONFORTAVEL, DOMINANTE EM TUDO, ESTABILIDADE, AMANTE DE ALTISSIMA VELOCIDADES, MUITISSIMAS PERSONALIDADES, DIRIGIBILIDADE, IMBATIVEL, INDISCUTIVELMENTE O MELHORSISSIMO EM TUDO, SHOW DEMAIS, 10, SUPERAÇAO, SENSACIONAL, LINDISSIMO, EXCELENTISSIMO, MAIOR POTENCIA MUNDIAL, REINA ABSOLUTISSIMO, PROTAGONISTA, CELEBRIDADE E ETCS
the software for the line must be beyond the word complex
it is.....
My 2022 1500 is on the rails there now and my 2014 was built there as well. Thanks for your hard work! I’m sure I’ll enjoy my new RST
May I add thanks from a fellow UAW member for a great truck and a job well done! BO from 2069
My RST has 3,000 trouble free miles now and getting free first oil change and check. The fuel mileage is out of this world! 25-34mpg! Thanks again!
I'm surprised at just how quiet it is moving all that around
It’s not as quite as you think. When you are inside it’s loud in most places. There are a few quiet spots.
생산직4년대 이상 초등학교취업 안되요 대한민국 현실🤔
My 2016 3/4 ton 4 wheel drive 4 door 8’ box was manufactured in that plant. I also own a Chevy 2005 one ton 4 wheel drive 8’ ( bought it brand new, has 200,000 plus miles and still runs great ) and a Chevy 1985 1/2 ton 4 wheel drive long box. Chevrolet “ Like a rock “
You’d think with mass production like this, everybody would be able to afford one.
@@Aaron-dp5kb Right, got to pay the CEO and send the work overseas.
Travis Ricks: Not when those people are making $60 an hour
Most people can afford a WT model, but no one buys one. They want a crew cab, 4wd, and V8 even if a regular cab 2wd V6 would do everything they'd ask for.
@@dutchman063 I have been to this plant a lot. What they get for the little work they do is a slap in the face to the regular worker with a skill. I hope soon it all goes automated.
Good point.
My Silverado was built here too , best truck I ever owned 👏👏👏
What happens when say you make a mistake on the line as everything is moving. That's what would worry me. But fascinating to watch .
You get fired.
It just keeps on going and it either gets fixed after it’s off the line or at the dealer
At a Toyota plant , they'd stop the line and fix the problem
@@tstocker6926 Sure they would.
@@moonbounce watch a document on Toyota , they actually care about quality, unlike US companies who seek quarterly profit
I love the robots. I know they take away from human workers, but they are so cool too watch.
That was a cool video that’s where my truck was built
Mine as well! I love my z71 Denali
I got to tour the tuck plant in Flint, MI one time... pretty cool operation... but nothing like the Toyota plant.. WOW.
Talk about precision 👍🏾👍🏾
Nothing precise about Generic Motors
Midnight Trumptrain What you drive?
Great video. Thanks for doing it. The order of operations is a little messed up in the paint shop, but it's all there. Thanks again.
Too short. I want to see it ALL.
Yeah, I want to see the doors be assembled and much more
Was in old Ford Plant in Milpitas CA doing some construction in early 80s... if you have not been in a plant this size you have not seen anything.. So huge they ride bikes in there to move around.
This seriously reminds me of the terminator
Man those robots took a lot of jobs.
Yep. They never call in, never have the brown bottle flu, and don't whine.
@@BiggusDickus2 haha its true
Robots are good for doing highly repetitive precision work, like welding and painting.
That was beautiful to watch!✌😎👍
Anibal Babilonia
American manufacturing at its best. 💪🏻💪🏻🇺🇸
@@georgeharleydavidsonrider156 you got that right brother!✊😎👍🇺🇲
The only automotive brand that changes it trucks body style ever 3 days!!!!!
When the paint booth looks more like a car wash. lol
Hats off to these hard workers
Always owned GM trucks but I am sorry the 2020 body style is a total disgrace to Silverado and Sierra I have a 2014 Silverado I will keep it on the road as long as I can till they change this style I will go to a different brand
lin67637
the modern assembly line is amazing
Removal is in reverse order of installation.
So removing the entire body off the chassis shouldn't take more than a few minutes?
my 2003 Silverado was built their. 138K miles west coast no rust good running truck.
I will never own another new GM product. I bought my first new chevy 4x4 truck in 1978 my 2nd in 1987 my 3rd in 2000 when it got wrecked my bought my 4th in 2004. drove it home 8.9 total on the truck and it never left my driveway again under its own power. after fighting with Gm dealer 6 days later when they did come to look at it the idiot locked the keys in it 3 times messed up my paint job and the 3rd time just busted the wide window out of it. I told the you just bought this truck back. after I got a lawyer involved I got my money back and been with ford ever since. but when you give 20k CASH for a truck and drive it 8.9 miles and they don't want to fix it. I think it was because I paid cash. and I called them with in 20 minutes of leaving the dealer. but I liked the video its cool how it all works.
Amen Glen. That's why I never pay cash.
Lies. GM has an obligation, and a promise. As well as the union would have never allowed it. Next time, speak to Corporate, not your friendly Chevrolet dealership. The dealership is not authorized or given clearance. As far as you paying cash, GM could careless. You are still a valued customer, no matter how you acquire a GM product.
Make a payment or two then pay it off.
Hi Glen. You obviously like GM trucks and that in itself is a great thing.
@@bobolulu7615 gm is all i ever owned until 2004
My 2006 GMC Sierra SLE was built there, 199,9XX miles now. Got it with 357 miles on it and only thing that I did not like is the thin roof with no bracing to stop it from vibrating in a high wind or wave shock from a semi.
Thanks, Enjoyed the video, Truck porn , Been a Chevy guy 50+ years. Got a red Fort Wayne one in the driveway. Runs dead smooth. GM stock $23, Ford $9.
fredboat Ford is $150 BILLION in debt
@@Mr.Beastforpresident Thanks I had not seen that, Good old uper management How could any company operate with that debt,? . I know to big to fail. Yikes.
fredboat How can they been in Business for over 100 years and the business still not be paid off?
That explains a lot why those transmission bolts are so hard to get to and many other components.
It’s almost as if they are built like no one will ever have to work on them.
Nathan Hatfield exactly smh...but they don’t care, they’ll never see them again.
Thats the way ALL factory's build the vehicles today ease of assembly not ease of repairs.
All throwaway, like your TV now
I like how they attach the thingamabob to the doohickey!
😂😂😂🤣🤣🤣🤡🤡🤡
Well it’s not like Illinois were jobs are beginning to scarce!
Tommy Fisher Fort Wayne is in Indiana
Andyco79 what does that has to do with Illinois
real cool stuff, i believe we need to thank henry ford for the way stuff was made, also he may have been 1st employer to give employees 8 hour shifts and weekends off
10_4_ on_420 old late henry ford also spied on his employees while they were at home, did they drink or not.. he maybe been inovativne, but was a POS.
That's where my 1990 was built.
Garbage then, and garbage today.
@@johncholmes643 There is a 1992 Silverado in my driveway with 267k miles and it starts and drives everyday. It's had its transmission rebuilt and has its share of problems, but I'm confident it will get me to work every day. It will still be running long after these trucks in this video are in the junkyard.
@@ChickenC0re Go back to sleep, it was only a dream.
@@ChickenC0re
I also have petrified wood in my landscape.
@@johncholmes643 you must be a Ford guy. My condolences.
Majority of the work is in Mexico now
Fantastic line of production GM conglatulation for The your vídeo!
jalan tol biayanya dari mana apa jasa marga atau pengembang atau pemerintah
Crew cab and regular cab assembled in Silao Mexico, Flint and Fort Wayne. I will take the ALL American assembled F 150 thank you!
If you look closely you can already see the rocker panels and cab corners starting to rust lol
At least it’s not a ram
its bent, The frame that is
At least it isn’t a Ford
Not if you wash then
Out like ppl should on my 2019 I wash those areas out two times a week in the winter time
Да
Sooner or later ALL these plants will be 100% automated, enjoy your job while you still have one. Companies don't need to pay robots, no sick leave, and no wages.
It won't be long now, either. It's pretty obvious just watching this footage. Save your money now while you can. Like 50% of your income, not $187 bucks a month.
The problem is that if every job becomes automated then, nobody will be able to buy products or services. How do you sell vehicles or any other product when nobody has jobs because of automation. It going to bite them back in the ass.
the rocker panels and cab corners are still gonna rust out
Buy Toyota or Nissan
@@jonasgrumby1093 why?
Better than having the frame rust out like Toyotas
Oh yes and please buy Nissan. But come back when you have to replace your transmission because of faulty hoses causing transmission fluid and coolant to mix
@@jonasgrumby1093 The frames rot out on those
I've owned a 1995 GMC Sierra 1500 V8 and I currently own a 2006 Chevrolet Silverado Z71 1500 V8 both were assembled at the Fort Wayne Indiana assembly plant.
I have designs on purchasing a new 2023 Silverado V8 and I am willing to travel to Indiana to get it.
GM can keep that 4 cylinder nonsense.
No offense to the hard working folks in the Silao Mexico assembly plant, but go Hoosiers!
I can’t stand the look of the new Chevy 1/2 ton or 3/4. GMC is my next truck, they kept the more of the old tradition
I've been a Dodge guy for the last 25 yrs.
That said, the front end of the GMC 2500 HD is like a Terminater coming after you.
It's just bad ass no matter how you slice it.
I too like the gmcs better after 2019
Remember back in mid 90's when the new look Ram was the talk of the town?
GMC got it going on the same way..
Well, you will pay MORE for the GMC and they are built on the exact same assembly line one after the other. There is NO difference in them except the PRICE. Put Chevy badges on this one and put GMC badges on that one. Very clever marketing. Two vehicles that are EXACTLY the same and people think they are "different!"
Uhhh, yeah. It's called General Motors..
Great memories. It is remarkably how well organized the assembly process must be to function properly. In most cases it does function properly and the line keeps rolling along. Some look at this video in awe. That may be because assembly plant processes and the propitiatory equipment needed takes years to develop and successes are then built upon successes. Only then can you produce a quality product in this manner..... Other who view this video just want to bash the working man or the product. As long as there are successes there will be tribalism or jealousy. It's human nature. Believe me there is nothing to be jealous of. Working on an assembly line is not a pleasant job. I respect any one who can do this day after day after day.
Henry Ford. Production line. This is the latest version. Imagine if it were available to him back then.
Ordered our 3500 Dually in Aug,,, still waiting for it.
God you got money!!
I wish I can work there
9:21 blue glasses, might be the real deal with a head injury but hear at my plant they usually dont want to do assembly and are a med. transfer,
My old 1977 Silverado got the same gas mileage as my 2005 Silverado.
WTF
At one third of the cost.
My 1999 silverado gets better gas mileage than both lol.
Gas mileage is government regulated.
Wow....the process is amazing.
Then the check engine light comes on @ 1500 miles😒😒😒
Gas cap is loose
Oops put diesel fuel in a gas truck.
This isn't a dodge
Your a dip shit dude.
Ford guy, you an tell
That was very Awesome to watch...I have a 98 Chevy Silverado it's my Green Manalishi, now i want to go out and buy one:)
I also have a green Silverado, I call him the Greenerado, ha!
Ive owned gm ever since I started driving but now 70k for a pickup like what I have now that's 15 years old idt so there making the vehicles cheaper and cheaper by the year but upping the price pretty soon gm will be like John Deere you'll have to take your vehicle in to dealer to get it repaired due to the software issue
I learned my lesson: never buy another GM vehicle ever again.
@@Zeppelinlv2007 ...you will have the same problems with any other auto manufacture out there.
@@Zeppelinlv2007 I've got one with 353k miles
Joe Blow he’s just trolling
My Chevy legend Silverado '94 K-1500 5 speed manual Ext Cab only had 528 K when lost it due to drunk head on. Thank God for seat belts!
Me encantaría trabajar para esa empresa siempre me a gustado todo lo que sea de camionetas se mira qué es un gran equipo
Wanna know why sales are down? b/c people can't afford to buy these monstrosity trucks anyone. bring back an affordable base model Colorado standard cab. that's what we want
That's why the Frontier is the last true simple small pick up. But they're doing away with it in 2021 or 22 I think. But the new one may come with a small Cummins option I think.
You're in luck . Chevrolet builds the low cost Colorado version truck called the W/T model.
No frills , bare bones or add options
That's not what I want. I want a regular cab, 1/2 ton 4x4 with an 8' bed and manual transmission. For under $30k!
@@MikeBrown-ii3pt Yup! People in HELL want a glass of ice water too.
Medic311 why not the S10 LoL
Pretty soon you gonna have to be certified to change a flat tire?
Neat video, thanks for sharing
Those king ranch look sick