I have a 2014 CRV LX, to confirm, you took a RCA wire and stripped that to expose the red and ground wires? You only use the red to connect to the yellow wire in back of the iMID and left the ground not connected? Thanks for any suggestions/input.
please i just installed the screen but the same problem! the small screen stays on after turning off the car! if i understand correctly you connect the yellow wire with the red to the rear port of the new screen or just the red wire to the port of the new screen? and the yellow wire what did you do with it? and do the buttons work? please i need a precise explanation…thanks
What do you mean by same problem? Same problem as What? If you used the t harness came with the radio and the module the radio will work. You need to update the firmware on the module and choose the car before it can work properly
@@goautosound1 the screen on it remains on even after turning off the engine! I want to know what exactly did you connect with the yellow RCA port on the screen? and what do you do with the other wire? where did you connect it?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
looked all over the internet but no one had information like you do, thank you
Great, thank you
I have a 2014 CRV LX, to confirm, you took a RCA wire and stripped that to expose the red and ground wires? You only use the red to connect to the yellow wire in back of the iMID and left the ground not connected? Thanks for any suggestions/input.
@howievuong9920 Yes, we have only connected video ➕️ and worked fine .most of the time, we only have to connect the positive side to make it work
what do you mean works most of the time? is there a glitch from time to time?
@howievuong9920 if it doesn't work, just ground the other wire to ground
please i just installed the screen but the same problem! the small screen stays on after turning off the car! if i understand correctly you connect the yellow wire with the red to the rear port of the new screen or just the red wire to the port of the new screen? and the yellow wire what did you do with it? and do the buttons work? please i need a precise explanation…thanks
What do you mean by same problem? Same problem as What? If you used the t harness came with the radio and the module the radio will work. You need to update the firmware on the module and choose the car before it can work properly
@@goautosound1 the screen on it remains on even after turning off the engine! I want to know what exactly did you connect with the yellow RCA port on the screen? and what do you do with the other wire? where did you connect it?
@massinissa_belgassemi the rca doesn't have anything to do with the top monitor staying on .you better double check all connectors on the bottom radio
i found different one on amazon .will that work?
As long as it's made for Honda, it should work
WILL IT WORK FOR PILOT?
Yes, it will. We have done a few pilots
I HAVE A ODYSSEY IT WORKS GREAT
Good to know 😌