@@Usmanthemecano I've taken them out with a small chain and a 2x4. I looped the chain around the axle and put a bolt through the chain to keep it tight around the axle then took the 2x4 and twisted the chain around it, then snath it about 2 or 3 times and voila it comes out. I had a camry that I couldn't get a snatcher around and couldn't get it high enough to get under it with a pry bar, so I thought of the chain and bolt idea. Also, I learned that both wheels have to be off the ground,nor you can snatch on the axle forever, it ain't coming off.
Thank you sir. For taking the time to make this vid.
Thanks for posting this. It really helped out today. Cheers my dude.
Liked the video, could hardly hear the audio, other than the power tools!! Keep up the good work.
Yes unfortunately that camera doesn't allow for external mic...
I'm so jealous yours came out with no issues. I've been fighting mine for hours!
Jack up the car high enough to get a good size prybar on it or a chisel and hammer
@@Usmanthemecano finally got it out! Thank you so much man. Your video is so appreciate!!!
@@Usmanthemecano I've taken them out with a small chain and a 2x4. I looped the chain around the axle and put a bolt through the chain to keep it tight around the axle then took the 2x4 and twisted the chain around it, then snath it about 2 or 3 times and voila it comes out. I had a camry that I couldn't get a snatcher around and couldn't get it high enough to get under it with a pry bar, so I thought of the chain and bolt idea. Also, I learned that both wheels have to be off the ground,nor you can snatch on the axle forever, it ain't coming off.
Thanks for the video audio is definitely lacking but very helpful 🙏🏿
Thanks for watching
Thanks 99 accord only guy not using all the best tools lol I did the sxle
My car jerks when I put it from park to drive. Will this replacement help that problem?
Maybe. Check the engine mounts as well
After the new one is installed do I need a alignment ?
Not usually unless you took apart things not shown in the video
What size socket is the axle nut? Thanks in advance.
Toyota are usually 30mm
Honda 34mm I believe
36 mm but if ur tired of the bullshit I used a angle grinder and cut off wheel
Do you have to do alignment after doing this ?
Na
@@Usmanthemecano thank you for the reply. Is it better to replace both or just the one that is damaged?
Just the damaged
What size socket did you use for the axle nut
Sorry I don't remember.
36mm, torque front to 180
Brother if those are harbor freight jacks take them back they have a recall. Don’t trust them.
Did it long ago but thank you!
Rip this fools break line 😂why you playing around with it like that .