Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
thank you sooooooooooo much , this is the first time i found a channel that say's the truth
the instructions were simple and straight forward👍
Thnku so much❤aapke wjh se lgra h abh ho jayega
tysm won 1st prize almost hamara bot kaa rating 4.6 hua and unka 4.8
Excelente. Describes paso a paso como preparar el robot Otto para que funcione. Mil gracias. HE VISTO MUCHOS VIDEOS Y ESTE ES EL MEJOR.
nice choice of battery to power me
Thank you
good job fella
Hi,nice video thanks👍🇦🇷
Greetings from Argentina👍🇦🇷🔥
Thanks 😊
Adipoli anu🤝😍😍
Bro we can right coad in mobile phone to robot
Yes
How can I make it Bluetooth based using HC05 module?
What screws do you use sir? What are the measurements of the screws?
Those screws come up with servos. Nothing from outside.
@@TechOwnSolutions You need extra screws to fasten the boards - what size are these?
Actually all screw's I used this project from servo motor(from larger servo). Nothing else (because I have plenty of servo motor in stock ).
Hi. How do you get the outside body?
It's from Amazon.
Mamoi ❤
No switch and buzzer in this project???
Yes it have
Super
Bro port not available in 2.0.1ide bro😭 pls give solution bro Saturday there is a competition for me
Which board you using
If you using nano , please download ch340 driver and install it on your pc. Than select oldbootloader from board library.
Yes bro the port has came but there is problem bro
Bro when i give upload it is uploading and after some more minutes it is says as(upload error:failed uploading:uploading error:exits status 1)
Select board type: Arduino nano, Oldbootloader Select port: available port will visibleThan it will work perfectly
Can you please help me to code it?
You can find the library on gethub. Link in the description box.
Bro battery ? Source of energy?
4 AA batteries,
Bro do you have the battery holder
No battery holder on our near buy shops
You can also use Li ion battery, it more convenient. But use 4A 6v or 5v buck(if 2cell using 3.7*2=7.4), boost(if single cell ) converter because the servo motor rated max 6v.
വാട്ട്സ്ആപ്പ് ലെ ചതിക്കുഴികൾ എങ്ങനെ തിരിച്ചറിയാം എന്നതിനെ പറ്റി ഒരു വീഡിയോ ചെയ്യാമോ 🤣🤣
thank you sooooooooooo much , this is the first time i found a channel that say's the truth
the instructions were simple and straight forward👍
Thnku so much❤aapke wjh se lgra h abh ho jayega
tysm won 1st prize almost hamara bot kaa rating 4.6 hua and unka 4.8
Excelente. Describes paso a paso como preparar el robot Otto para que funcione. Mil gracias. HE VISTO MUCHOS VIDEOS Y ESTE ES EL MEJOR.
nice choice of battery to power me
Thank you
good job fella
Hi,nice video thanks👍🇦🇷
Greetings from Argentina👍🇦🇷🔥
Thanks 😊
Adipoli anu🤝😍😍
Bro we can right coad in mobile phone to robot
Yes
How can I make it Bluetooth based using HC05 module?
What screws do you use sir? What are the measurements of the screws?
Those screws come up with servos. Nothing from outside.
@@TechOwnSolutions You need extra screws to fasten the boards - what size are these?
Actually all screw's I used this project from servo motor(from larger servo). Nothing else (because I have plenty of servo motor in stock ).
Hi. How do you get the outside body?
It's from Amazon.
Mamoi ❤
No switch and buzzer in this project???
Yes it have
Super
Bro port not available in 2.0.1ide bro😭 pls give solution bro Saturday there is a competition for me
Which board you using
If you using nano , please download ch340 driver and install it on your pc.
Than select oldbootloader from board library.
Yes bro the port has came but there is problem bro
Bro when i give upload it is uploading and after some more minutes it is says as(upload error:failed uploading:uploading error:exits status 1)
Select board type: Arduino nano,
Oldbootloader
Select port: available port will visible
Than it will work perfectly
Can you please help me to code it?
You can find the library on gethub. Link in the description box.
Bro battery ? Source of energy?
4 AA batteries,
Bro do you have the battery holder
No battery holder on our near buy shops
Yes
You can also use Li ion battery, it more convenient. But use 4A 6v or 5v buck(if 2cell using 3.7*2=7.4), boost(if single cell ) converter because the servo motor rated max 6v.
വാട്ട്സ്ആപ്പ് ലെ ചതിക്കുഴികൾ എങ്ങനെ തിരിച്ചറിയാം എന്നതിനെ പറ്റി ഒരു വീഡിയോ ചെയ്യാമോ 🤣🤣