Hello from the Philippines! I love how real steel owners compare their airsoft on their real counter parts. :) Soon I'll also be comparing mine. Still saving up for a Cybergun 1911. Cheers!!!
it is a we tech. I have an upgraded barrel and hop up bucking in mine and it is accurate enough to hit a human sized target reliably from around 40m. I did a review on it with a shooting test on my channel. From 15m away with the stock barrel and hop up bucking it only hit the head sized target 2/10 times.
@@Big_Bush848 yes I have real houge grips seen on the real gun on both my silver and gold airsoft ones. They do require modification to fit that can be done with a dremel.
the airsoft slide would fit onto the real thing, but the pressures or the gasses on the real one would destroy the metal, and the real slide on the airsoft version would be too heavy, the psi of the gas would destroy the internals after a few attempted shots.
@@JGSnipes there’s places where it’s possible to buy the internal parts of the real one and I wonder if it’s possible to build and a working it . Like gas pistons and most if not all parts
Thanks for waiting it will possibly be coming this weekend, no I did not try to see if slides are compatible but I would assume so as the rails the slide rests on are identical.
I actually thought the real one was the fake one from the thumbnail. But if you copy and paste the below you will see why. I'm planning on buying the below and its spot on identical. Still good video. Well done. Magnum Research from Cybergun. AIRSOFT DESERT EAGLE L6 UNBOXING and review. Raw video no editing.
Yes, I know it’s very hard, I saw a desert eagle holster on evike for relatively cheap but it seems like if you want a good holster the only options are real holsters that are 80+$
And the fact of the matter that you've got "air soft" writien on the side of your gun...and I've got "DESERT EAGLE .50" writien on the side of mine. Bullet tooth Tony.. "Snach the movie"
you would think the 50 is heavier, but they are the exact same size, the only difference is how much metal is removed to make the barrel and the bolt, so the 50 is probably ever so slightly lighter than the 357, if you are worried about the mag being in because of safety, at no point were either gun loaded, if you are worried about weight, the real ones mag is slightly lighter than the airsoft mag, but not enough to make up for the almost 2lbs less it weighs, also the airsoft mag is modded with a drum and stuff, so its a lot heavier than stock
If he knew anything about guns, he should know to not just drop the slide by pressing the slide lock and release, put daddy's gun back in the safe kid lol
It’s a slide release hun, that’s its function?. I’m not worried about the slide lock rubbing down and yes it’s not registered under my name but I did pay for it. My dad told me he would never buy one because they are so impractical. So I handed him the money and now we have one.
@@JGSnipes It's not the slide release, its the slide slamming into the breech every time you let the slide drop on an empty chamber, if you screw up the tolerances and gawl your chamber and your breech i wont feel sorry, nor will anyone else, and also last time i checked the law, isn't giving someone money who has a firearms license to buy someone who doesn't have a firearms license illegal? I'll tell you, great comparison but next time let your father because there will be that one asshole worse than me who will get your ass put in jail because thier butthurt about legality instead of a beautiful firearm lol. good luck with that, and dont break your wrist firing it... "hun"
@@JGSnipes ugh you really are a rookie arent you? the slide doesn't slam into the breech at the same force when you load a round into it, its considerably slower because of the force needed to strip a round out of the magazine, slamming the slide foward on an empty chamber falls home with full force, which thier not designed to do, i really think you should put daddys gun back and leave the reviews to real professionals who knows what thier doing
Hello from the Philippines! I love how real steel owners compare their airsoft on their real counter parts. :) Soon I'll also be comparing mine. Still saving up for a Cybergun 1911. Cheers!!!
Thanks! Hope the video turns out well.
Hello @Bertoman45, where are you planning to buy the Cybergun We-tech Deagle in PH?
Edit: Nevermind, you plan to buy the 1911 not the desert eagle
@@sflux4593 maybe I'll score it at My Airsoft Shop in Timog area. Php8k or Php7k is the price.
You ever try swapping parts with the real one just for kicks.
What a coincidence im also filipino. Mabuhay
Do you know if the airsoft Desert eagle in the video is acurrate (7 - 10 meters)
it is a we tech. I have an upgraded barrel and hop up bucking in mine and it is accurate enough to hit a human sized target reliably from around 40m. I did a review on it with a shooting test on my channel. From 15m away with the stock barrel and hop up bucking it only hit the head sized target 2/10 times.
а если поставить затвор с боевого на аирсофт? подходит?
Didn’t try it but I think it would fit but not function on the airsoft version.
The airsoft version is over the top. I can’t even imagine shooting the real thing! 😮
They are both fun!
Just fyi M.R. Also makes a all Stainless version as well.
I get what you mean, we tech advertises this as an L6, but the MR designation would be the stainless mkxix. We tech named it falsely.
Can the real handg grip use in Airsoft?
@@Big_Bush848 yes I have real houge grips seen on the real gun on both my silver and gold airsoft ones. They do require modification to fit that can be done with a dremel.
Will the hogue grip fit onto the WE Tech L6???
Yes with some slight mods. I have 2 we tech L6 both with the houge grips.
I wonder if you could use airsoft parts to replace used parts
the airsoft slide would fit onto the real thing, but the pressures or the gasses on the real one would destroy the metal, and the real slide on the airsoft version would be too heavy, the psi of the gas would destroy the internals after a few attempted shots.
@@JGSnipes but if where to buy original parts for the gas piston it would probably work?
I wonder if you use a Barrel of the real desert Eagle and receiver onto the airsoft model
Because it could potentially make possible to build a firearm without license
@@JGSnipes there’s places where it’s possible to buy the internal parts of the real one and I wonder if it’s possible to build and a working it .
Like gas pistons and most if not all parts
Nice video!, But you didn't try of the slides are cross compatible.
I will waiting for the vídeo of the experience of the baba yaga
Thanks for waiting it will possibly be coming this weekend, no I did not try to see if slides are compatible but I would assume so as the rails the slide rests on are identical.
I actually thought the real one was the fake one from the thumbnail. But if you copy and paste the below you will see why. I'm planning on buying the below and its spot on identical. Still good video. Well done.
Magnum Research from Cybergun. AIRSOFT DESERT EAGLE L6 UNBOXING and review. Raw video no editing.
Lol yeah I see why
@@JGSnipes Yeah I was shocked when you pulled out the fake one. I thought maybe you were purposely messing with us.
Question! Is the WE-Tech L6 Eagle 1:1 size ratio with your real L6? The journey of finding a good holster pains me.
Yes, I know it’s very hard, I saw a desert eagle holster on evike for relatively cheap but it seems like if you want a good holster the only options are real holsters that are 80+$
Google up real steel ones. I found one for mine for about $50
He’s back 🔥🔥🔥
Yes
And the fact of the matter that you've got "air soft" writien on the side of your gun...and I've got "DESERT EAGLE .50" writien on the side of mine.
Bullet tooth Tony.. "Snach the movie"
@@Greeneyesinthejungle lol
why you had a magazine in the .357 when comparing the weight? And shouldnt the 50AE be bigger and heavier than the 357?
you would think the 50 is heavier, but they are the exact same size, the only difference is how much metal is removed to make the barrel and the bolt, so the 50 is probably ever so slightly lighter than the 357, if you are worried about the mag being in because of safety, at no point were either gun loaded, if you are worried about weight, the real ones mag is slightly lighter than the airsoft mag, but not enough to make up for the almost 2lbs less it weighs, also the airsoft mag is modded with a drum and stuff, so its a lot heavier than stock
When you mistake and get the wrong one to airsoft game.... :O
🤷♂️
0:50 desert fart
@@Preecy lol case squeak
Thanks bud
Your welcome
Why do you have double Desert Eagles?
Me: 1 for make the moment fun and the second for make the moment fun, but In 4K full HD.
Lol
It's lit😎
Thx
OK. I will buy the real one instead.
Definitely
中国没有枪，玩具枪也是枪😢
Unfortunate :/
😍😍😍😍😍🔥
❤️
👏👏👏👏👏👏👏👏👏👏🇺🇸🇧🇷✊💀✌
what is your age you sound 16
18 yeah ik I hate my voice
@@JGSnipes ok
If he knew anything about guns, he should know to not just drop the slide by pressing the slide lock and release, put daddy's gun back in the safe kid lol
It’s a slide release hun, that’s its function?. I’m not worried about the slide lock rubbing down and yes it’s not registered under my name but I did pay for it. My dad told me he would never buy one because they are so impractical. So I handed him the money and now we have one.
@@JGSnipes It's not the slide release, its the slide slamming into the breech every time you let the slide drop on an empty chamber, if you screw up the tolerances and gawl your chamber and your breech i wont feel sorry, nor will anyone else, and also last time i checked the law, isn't giving someone money who has a firearms license to buy someone who doesn't have a firearms license illegal? I'll tell you, great comparison but next time let your father because there will be that one asshole worse than me who will get your ass put in jail because thier butthurt about legality instead of a beautiful firearm lol. good luck with that, and dont break your wrist firing it... "hun"
@@XLexieXBabyX ah yes because every time you shoot it and it rechambers it totally doesn't do the exact same thing
@@JGSnipes ugh you really are a rookie arent you? the slide doesn't slam into the breech at the same force when you load a round into it, its considerably slower because of the force needed to strip a round out of the magazine, slamming the slide foward on an empty chamber falls home with full force, which thier not designed to do, i really think you should put daddys gun back and leave the reviews to real professionals who knows what thier doing
@@XLexieXBabyX Cool bro thx for the education. You are officially my first hater! Congrats! Btw again I paid for it I'll treat it how I want ;) Bye!