Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/
So I had the Milwaukee M18 random orbital sander and decided to purchase the new m18 sheet sander. I tested both on stripping paint from my kitchen cabinets to prep for paint. With both using 80 grit sand paper the sheet sander was way faster at stripping the paint. I figured it was going to be the other way around lol. Was only going to keep one but I don’t know which to keep so guess I’m keeping them both 😂
You are not alone! I am stripping the last bits of paint from trim and my Craftsman 2.0A 1/4 sheet sander is probably twice as fast as my Makita 5” random orbital. Both sanders are using 80 grit 3M pro grade. Go figure!
I only have random orbit sander and I use it on bodywork on vehicles coz i only have a small compressor which cannot use DA sander. The good alternative is picking random orbit sander. Its like heaven-sent tool on prepwork. Cutting bodyfiller fast, flat and closest to the body as it could be rather blocking it to size. Also I use them to locate dents on huge panels whicu makes you more productive. Now i want to try finising sander for color sanding. ( getting rid of orange peel. ) My arms grow sore I sand only by hand. Anyway. Clear and concise video. Thank you!
Well I’ll just be darned. I had no idea that plate for the bottom of my sheet sander was to create vacuum holes. So yes, I learned something today. Thanks!
I'm in need of a new sander, so your video is very helpful to me. One thing stood out and that was aligning the holes on the orbital sander. I think I would cut two short dowels to stick into the sander opposite of each other, then slide the matching holes down the dowel. That should be quick, and maximize alignment.
Great video! I would like to add, if you already have an oscillating tool, you can purchase a sanding attachment to reach those same corners that a sheet sander can fit into. Cheers!
for most of common works and diys what should i buy, i watch most of diys creator using orbital one even for finish? most of time i would like to get paint out of old furniture? or for wall sanding what would u suggest?
Great video! Subscribed! :) Repainting our old doors. Will Sheet sander be enough or should i go for orbital ones? Just need to take off that old paint from the wood.
If your doors have recessed sections with corners, the right angled sheet sander pad can get into those corners better than a round orbital pad. If there are no corners go for the orbital. Have fun painting. Thank you.
Why are you calling a sheet sander a palm sander? I’m trying to understand all the differences and am unsure if I’m missing something. Thank you in advance
I am making cricket bat now I am sanding bat with grinder but it makes Mark not giving smooth finishing. So what is best to do my work. Your recommendation is orbital sander????
I have a sheet sander…I am prepping ugly old golden oak cabinets for painting…will it work for what I am doing or should I get an orbital? Thanks for the explanation…great video.
Sheet sanders are better for getting in corners because of the square shaped pads. This is good for cabinets because of all the straight edges and corners inside.
What kind of sander would you recommend me to buy if I'm using it for my ceiling? I'm trying to remove my popcorn ceiling this summer and sand it before I repaint it.
Use a drywall knife or spatula to scrape off the popcorn until the surface is smooth then sand it. Or if you only use a sander to remove the popcorn, use an orbital sander. Start with a coarse grit paper to remove the bulk of the popcorn then use a finer grit as you go in.
I still can't decide. I have an old veneer dresser that I want to refinish. I removed most of the varnish with chemical remover, but now I want to smooth the veneer with more sanding. Which is best?
All sanders leave swirls. If the swirl is very noticeable it could be something in between the sander and the wood, like dust or wood chips, worn out sand paper or sanding technique.
I’m a beginner! Thanks for your video, i want to get a sander, I’m still stumped on which one of the two types to get.. can you recommend? Between the two?
Orbital sanders are more suited for rough sanding work. They are more powerful than sheet sanders. Sheet sanders are good for lighter sanding jobs and there is less risk of over sanding. Sheet sanders are also better for getting into those corners because of the square sheets. .
Depends on if it’s a concave curve(outward) in which case an orbital would do. If the curve is convex(inward) and smaller than the face of the orbital sander you may need another tool like a tailed sanding apprentice.
This video was so helpful! I'm gonna go with an orbital sander for my DIY project for my dresser and nightstand. What grit should I use to remove the paint and other layers? Should try some type of remover?
You can start with a coarse grit paper and work up to a finer grit. Is your dresser pressed wood. Anything from 40 grit to start on up to 150 to 220 fine grit to smooth it out. As far as removers, soapy water or a heat gun and putty knife are some chemical free options. Nail polish remover or paint thinner are options but the chemicals are harsh.
@@rickferr1546 For the wood garage, start off with a more coarse sand paper like 80 grit then graduate to 150 grit and from that to 220. For the metal door, go really fine with 400 grit, for the tough spots drop down to about 150 grit. a variable speed orbital sander should work.
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com
Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/
So I had the Milwaukee M18 random orbital sander and decided to purchase the new m18 sheet sander. I tested both on stripping paint from my kitchen cabinets to prep for paint. With both using 80 grit sand paper the sheet sander was way faster at stripping the paint. I figured it was going to be the other way around lol. Was only going to keep one but I don’t know which to keep so guess I’m keeping them both 😂
You are not alone! I am stripping the last bits of paint from trim and my Craftsman 2.0A 1/4 sheet sander is probably twice as fast as my Makita 5” random orbital. Both sanders are using 80 grit 3M pro grade. Go figure!
Thanks, I didn't know I should have punched the holes in the sandpaper for my sheet sander.
Glad it helped.
I only have random orbit sander and I use it on bodywork on vehicles coz i only have a small compressor which cannot use DA sander. The good alternative is picking random orbit sander. Its like heaven-sent tool on prepwork. Cutting bodyfiller fast, flat and closest to the body as it could be rather blocking it to size. Also I use them to locate dents on huge panels whicu makes you more productive. Now i want to try finising sander for color sanding. ( getting rid of orange peel. ) My arms grow sore I sand only by hand. Anyway. Clear and concise video. Thank you!
Love those tips. Appreciate you.
Well I’ll just be darned. I had no idea that plate for the bottom of my sheet sander was to create vacuum holes. So yes, I learned something today. Thanks!
I'm in need of a new sander, so your video is very helpful to me. One thing stood out and that was aligning the holes on the orbital sander. I think I would cut two short dowels to stick into the sander opposite of each other, then slide the matching holes down the dowel. That should be quick, and maximize alignment.
Great suggestion.
Will the sheet sander remove old paint off wood? I’m working on refurbishing a old bench
Yes it wood(pun intended). Yes it would.
Good stuff!! Thanks!!
You’re welcome
This is exactly the answer I needed. Thank you so much for making this!
Glad it helped.
Informative! Thanks.
You’re welcome
Great info. My man!
Glad it helped.
Big up
Because of your intro I'll never watch your channel again
@@georgedobbs9216
I don't know why I said that. Just re-watched it and it's fine.
Musta been after my Ambien and I thought it was too loud.
@@Madmaxian1088 tool
Great video! I would like to add, if you already have an oscillating tool, you can purchase a sanding attachment to reach those same corners that a sheet sander can fit into. Cheers!
Great tip thank you.
Omg! Thank you so much!! I was thinking how to hit the corner!! Very helpful tip
Hey there! Thanks for the information. I learned something new today. 👍 Thank you for taking the time to make this video
You’re welcome, anytime.
Great video... thanks for taking the time to put it together!!
for most of common works and diys what should i buy, i watch most of diys creator using orbital one even for finish?
most of time i would like to get paint out of old furniture?
or for wall sanding what would u suggest?
Use an orbital. Sheet sanders are great for corners you can’t get to with an orbital.
@@Caliber8Tools orbital would be better for me than sheet for most cases? and i can sand corners manually.right ?
Sheet sander pad is square so it would be better forgetting in those corners.
Refinishing my front door and got a sheet sander based on this video. Thank your for the explanation. ✌️
You’re welcome.
Cud I use the orbital sander at a lower speed to do work I'm going to try some diy projects without buying the two of them
Yes, with a variable speed orbital sander you can.
i liked the way u explained the differences…!! thanks…
No problem.
Caan any of these be used to do minor concrete finishings.
Yes they can, they are great for prepping concrete.
Great video! Subscribed! :)
Repainting our old doors. Will Sheet sander be enough or should i go for orbital ones? Just need to take off that old paint from the wood.
If your doors have recessed sections with corners, the right angled sheet sander pad can get into those corners better than a round orbital pad. If there are no corners go for the orbital. Have fun painting. Thank you.
@@Caliber8Tools Thanks!
Whos the square sponge bob guy behind you??? lol
That’s Exactac Man. The mascot for the Exactac Picture Hanging Tool. He said to tell you hi. www.exactac.com
You star each of your segments with "ok guys".
God bless you sir. You literally answered my question within 10 seconds of watching the video. THANK YOU
Glad it helped.
Why are you calling a sheet sander a palm sander? I’m trying to understand all the differences and am unsure if I’m missing something.
Thank you in advance
They are the same thing which is the smallest type of sander with square pads to get into corners and tight spots. Good for light duty finish work
Well done. I needed that!
Thanks, glad it helped.
Which sander is best to sand down fascia boards around the house? They have only been primered few years ago never painted.
Go with the orbital.
I am making cricket bat now I am sanding bat with grinder but it makes Mark not giving smooth finishing. So what is best to do my work. Your recommendation is orbital sander????
Try using 150 grit sand paper and lightly oil it after.
I have a sheet sander…I am prepping ugly old golden oak cabinets for painting…will it work for what I am doing or should I get an orbital? Thanks for the explanation…great video.
Sheet sanders are better for getting in corners because of the square shaped pads. This is good for cabinets because of all the straight edges and corners inside.
i'm planning to repaint my door which the wood starts to get rough, should i get sheet sanders for these job?
If the door is completely flat an orbital will do. If it has recesses with corners get a sheet sander for the corners.
What kind of sander would you recommend me to buy if I'm using it for my ceiling? I'm trying to remove my popcorn ceiling this summer and sand it before I repaint it.
Use a drywall knife or spatula to scrape off the popcorn until the surface is smooth then sand it. Or if you only use a sander to remove the popcorn, use an orbital sander. Start with a coarse grit paper to remove the bulk of the popcorn then use a finer grit as you go in.
Its been months but i hope you can read this...
I just wanna ask which is better for sanding wood board and Plywood?
Both are good. Sheet sanders are great for getting in corners. Orbitals are good for large areas, it’s more versatile.
Ryobi tools suck.
Ok
2:40 just use 1 or 2 dowel to line it up
fANTASTIC AND INFORMATIVE VIDEO. i KNEW THAT i NEEDED TO GET ANOTHER SANDER BECAUSE IT JUST WASNT THAT POWERFUL ENOUGH
Glad it helped.
Glad it helped.
So easy-to-use
Glad it helped.
Great explained . Thanks
You’re welcome
I still can't decide. I have an old veneer dresser that I want to refinish. I removed most of the varnish with chemical remover, but now I want to smooth the veneer with more sanding. Which is best?
Use an orbital. If you need to get into corners use a sheet sander.
@@Caliber8Tools thank you !
Great explanation. Off to buy a sheet sander. Thanks.
Glad it helped.
Thanks
Glad it helped.
Please let me know how to sand from small gap where sander can not go
Use sheet sander for corners.
Excellent! Thanks!
Glad it helped
3:04 - No, they are not perfectly aligned.
How is the sheet sander made for finish work but it's more likely to leave swirl marks?
All sanders leave swirls. If the swirl is very noticeable it could be something in between the sander and the wood, like dust or wood chips, worn out sand paper or sanding technique.
Can I use a sheet sander for removing popcorn ceiling
I would use a wide putty knife to scrape the popcorn texture off the ceiling. Then I would sand it.
You're video answered a few questions that I had. Thanks for posting, very informative.
Any time. Glad it helped.
I’m a beginner! Thanks for your video, i want to get a sander, I’m still stumped on which one of the two types to get.. can you recommend? Between the two?
Orbital sanders are more suited for rough sanding work. They are more powerful than sheet sanders. Sheet sanders are good for lighter sanding jobs and there is less risk of over sanding. Sheet sanders are also better for getting into those corners because of the square sheets. .
Both are needed if you're serious about wood!
Absolutely.
thank you very much it hlep me alot
No problem.
Thanks for this video. You answered my questions easily. Now I know I really need both lol.
Glad it helped.
Which one will be better for sanding curved area?
Depends on if it’s a concave curve(outward) in which case an orbital would do. If the curve is convex(inward) and smaller than the face of the orbital sander you may need another tool like a tailed sanding apprentice.
Very informative. Thanks a lot!
You’re welcome. Glad it helped.
Yah kaun si wali machine hai bhai
With a really fine grit sandpaper, can the random orbital sander also be used as a finish sander?
Yes it can
Thank you for this! Informational videos like this, are very valuable.
No problem. You’re welcome.
Very good explanation.thanks
Your welcome.
This video was so helpful! I'm gonna go with an orbital sander for my DIY project for my dresser and nightstand. What grit should I use to remove the paint and other layers? Should try some type of remover?
You can start with a coarse grit paper and work up to a finer grit. Is your dresser pressed wood. Anything from 40 grit to start on up to 150 to 220 fine grit to smooth it out.
As far as removers, soapy water or a heat gun and putty knife are some chemical free options. Nail polish remover or paint thinner are options but the chemicals are harsh.
@@Caliber8Tools Do you have a video that'll help me tell the difference? I think it's just wood.
I would start with 80 grit, don’t press too hard when sanding. You can create dips in the surface that way. Then use a 150 grit then a 220.
Which sander is best for automotive painting?
Orbital, covers more surface area.
Great man. Now am more informed which one to buy
Glad to hear it.
Thanks for the video. Now a question: Can I use the sheet sander and start out with lower grit paper and go up gradually?
Yes you can.
Good explanation and operation and differences.
Thank you.
You’re welcome. Glad it helped.
Very helpful. Thanks.
Glad it helped.
Best to have both I think
Absolutely.
Thank you! A very helpful detailed video.
You’re welcome. Glad it helped.
Great video and explanation of these sanders
Glad it helped.
Thank you thank you!
You’re welcome.
Great vid, thanks!
You’re welcome.
If using a 60 or 80 grit sandpaper won’t it remove old paint on a sheet sander ?
It would.
What would u recommend for stripping old lose paint from a wood garage or flaky paint from a metal door
@@rickferr1546 For the wood garage, start off with a more coarse sand paper like 80 grit then graduate to 150 grit and from that to 220.
For the metal door, go really fine with 400 grit, for the tough spots drop down to about 150 grit. a variable speed orbital sander should work.
Learned a lot, thank you!
Glad it helped.
THANK YOU
You’re welcome. Glad it helped.
Thank you for the info!
Glad it was helpful.
Thank you, I know what I need to buy now!
Glad it helped
Easy to understand!
Glad it helped
Excellent explanation.
Thanks
Hey buddy, you’re not the only one who calls them “clamps”. You didn’t invent that 😂