Duramax CTS2 Monitor/EGT Probe Install
HTML-код
- Опубликовано: 13 окт 2024
- This is a full install video on my Edge CTS 2 Monitor and EAS Expandable EGT probe on my 2007 LBZ 2500hd Silverado Duramax 4X4. Thanks for watching and don't forget to subscribe!
www.ebay.com/i...
Edge 84130 Insight CTS2 Monitor Gauges Scanner with 1996-2016 Vehicles OBDII
www.ebay.com/i...
Edge PACKAGE DEAL 84130 Insight CTS2 Monitor & 98603 Starter EGT Expandable Kit
I’ve been binge watching all these videos I am new to owning a LB7 and so far you have answered a lot of questions and helped me through it all!
I love all these vids 👍
i agree, you're doing a great job with these duramax videos man! keep them coming!
Joe Lew much appreciated man
Changing the tire size DOES NOT change the dash speedo, it only changes the MPH on the Edge Insight device. Youd select the C-MPH PID & itll read the correct MPG on the monitor device ONLY.
Enjoying the videos. Always my go to for information concerning my DMAX!
Thanks
I've never been so impressed and helped as I have with your Duramax videos!
Thanks alot Josh Truck MASTER 🏁
Lmm in Colorado 🤠
Ive been running it since october with egt on 16 PS F250 with the probe I love it works great.
+JDH it's a great setup
If you are looking for a nice turbo timer there is one included in the remote start kit I purchased. It is almost a full plug and play kit and it has been worth every penny. The base kit is about 150 and for the higher end kit I think it's 250. I have the base kit. It is called mpc (my push cart) look into it. You won't be dissapointed.
You do a great job with your Duramax vids. Please keep it up because it helps dummies like me.
I will keep it going thanks!
Great content as always. I’m new to duramax I just got an lmm. You’ve helped me a lot in the short time I’ve owned it. Fellow vet and thanks for all you do. We appreciate you sacrificing your precious time to help us keep our trucks on the road being able to do most things ourself. Couldn’t do it without folks like you posting detailed content. Thanks again!!! God Bless You
Hey brotha, I installed the MBRP down pipe last year... No more hissing! All rumble now!
Badass.
God bless
Thank you for your service sir.
+James Dean that's good to hear I can wait to install it but I have a major upgrade coming up before I do a video. Thanks for the support man
Right on, keep it up.
Do you have in any insight on the newer CTS3 Insight?? I'm in the market for some type of gauges that are plug n play like they Edge products. I've read so many bad reviews on the CTS3... I don't know enough to make a decision... I am a mild Enthusiast when it comes to my LBZ.... Weekend towing to RV resorts.... Any insight would help.... Love your videos!!
Dude, I had to look away when you were rotating that connector. Good way to turn it into junk. Line up the keyways
finally someone who shows how to do this shit!
thank's your videos. silverado owner in Finland.
+jouko rusanen awesome!
What do you think about the H&S mini max? I’ve heard from people that love it, as well as others that hate it. I would like to have the monster and tuner all in one. That also supports the egr and dpf deletes. Thanks for the wealth of knowledge!
Monitor not monster haha
How do you like the H&S Mini max? I want one for my lmm, Thanks 🏁
love these videos man I just recently bought me a duramax and I can say ur videos are nice man thanks for u time in making these vidz and explaining them
+mommyofjosie no problem I figured I would start posting these to help others out enjoy the new DMAX
anytime something is tight i do what you do pull out the torch haha and then when it starts moving i turn it back and forth so it kinda cleans itself as its turning makes your chances of it not breaking alot better when you turn it in and out just a little at a time so good video man ive watched it before but being sorta stuck inside cause the wife and i's business had to be closed im bored so i figured id go back through and bing watch all the older vids hahaha but love the content man
Lol I saw that box and was like downpipe lol I installed that on my lbz as well along with the 5 inch mbrp dp back exhaust kinda a pain to get in right without touching crossmembers and stuff but well worth it I love the sound of it.
Hey Josh im trying to find a cts2. I really didn't care for the new led cts3. I've tried all tge companies and there discontinued. Any chance you might have one. Please let me know. I'll even pay the shipping. I truly appreciate it
Finally after hours of videos just to find out if the cts2 will change the tire size. Next question is. Will it do day light running headlights? Or keep my stereo on after i shut the key off
Aniti seize is always a good idea I put plenty of it on mine.
+JDH I should have done that
Awesome you should open a shop God given you the Gift of speech. Uses. This is the 70 year old Guy and everything you install I buy. I m getting ready to install a turbo on my 2007 early classic LBZ. Need some advice got my down pipe y bridge is coming the egr delet blew out and craked the uppipe. Installing full flow exhaust manifolds and full flow ups gott the doyen pipe On board I D Rob. Let me know on the turbo guys.
Thanks I’m glad I can help out any way I can I don’t recommend Idaho rob anymore since they went out of business also I had issues with Onboard but I’m really thinking about a stealth 64 turbo as a next upgrade! Thanks for all the support and good luck to you sir
You said you have a lot of miles at 156k then I wonder what do I have with 300k miles? Stock original trans 2002 LB7 Duramax . Thanks for showing us how to install brother blessing truck master
Thanks brother
@truck master @cholo chedd I got a 02 LB7 with 109k miles lol whats mind?
I'm just shopping now but I'm going back and forth between gas and diesel
Go diesel man you will love the extra power
Hey Truck Master....I really want to buy this Monitor for the Injector balance rates, but was told a few days ago that these devices have removed them due to lawsuits recently...didn't know if that is true or not, so please let me know what the word is when u get a chance because my purchase depends strongly in that feature...thanks
i have bullydog and its nice for a tuner and information screen but there is so many bigger and better optioned ones out there i wish i woulda waited like two or three years before buying but at the time .. which was a long time ago bullydog was the better one to get out of what was around before the whole diesel tuners blew up like they did.. im happy just cant load other tunes onto my bullydogs they are the older models... :(
For sure the best video I have found!! Great job!!
+Goochiemoma8 I really appreciate that
Best to install analog RGT and boost gauge.
Well I have some bad news. I ordered the CTS2 Monitor/EGT Probe installed it, LOVED IT. Someone stole my truck and took it.... so sad! You have helped me install a lot of stuff, I love your videos Truck Master keep up the good work. I hope to get another CTS 2 again.
Love this channel planning on buying a 2007 Chevy duramax
+Marcos Garcia thanks brother
Did you push the grommet into the cab from the engine bay? Did you reseal it after?
Hi good channel and videos. I bought a cts edge the same that you but I have 2006 express duramax I was looking for for put the egt and my engine don't have the conector. How I can put the egt? Please help me thanks 🙏
Love these Duramax videos bud.
+Breckin fidler thanks man
Ahhh the classic truck master video
hey truckmaster my truck is in the shop getting all 8 injectors and a cts 2 monitor. my current gauge cluster seems to be going out will the cts 2 be able to show me the fuel gauge and not just fuel pressure? its an 04 lb7
What I it that you have to do when you take that dpf off. Just go on diagnostics and clear codes? Willthe engine light reappear if it doesn't read dpf sensors? I'm about to delete it on my 08 lmm and saw the exact cts and wondering
So I have had my 03 3500 as far as I know I don't have any bully dog or performance probes on this truck. I would like to install this Edge CTS2. Not sure how to go about with adding the probe. Can you help and point me into the right direction? Thanks
I Have a lly with efi live and egr delete. Is there any reason for me to install the egt sensor? It's a daily driver with light towing. I don't race or sled pull with it. Is the egt that important to monitor?
Got a quick question would u get or the piller gauges I’m just starting on my lbz
have you ran into any problems with the unit? I have been doing research and seems 50 percent like it 50 percent hate it.
thanks for the video, getting a 2001 with only 92k on it later this week
it's a 4x4 with a dump body :)
+patrick evans very nice it's hard to find a LB7 with low miles take care man
Great video
I know that this is an old video but what wires are routed THROUGH THE DOOR JAM at 9:02?
Do the edge product tune you vehicle? Looking for a mpg tune.
Yes but only if you pay to have them loaded in the Monitor
So would the CTS2 completely replace my edge juice with attitude wiring harness, since it connects straight to the OBDll port?
So do you need the CTS2 and EGT Probe together? What was the EGT probe for?
Robert Newman EGT stands for exhaust gas temperature it is a way to monitor your temp so you don’t fry your turbo or piston rings from too much heat
Here’s a link that describes the purpose of a pyrometer a little better
official.bankspower.com/tech_article/why-egt-is-important/
did you ever do a video on ac delco injector cleaning ?
+Tyler Tranni not yet I really should have but I will get to it when the weather warms up
That truck is filthy......
What did you do to block the holes for the pvc on the valve covers
had a question.i have a lbz duramax i have efi live tune done on it and was wondering if i can get the same edge cts2 monitor as u did and keep my efi live tune?basically what im asking is if i can keep my old tuner and have a edge cts 2?is it gonna mess with my existing tune or its gonna b fine?really like your videos keep it up.
+Alex mazhan the monitor only monitors your trucks parameters so yes you can have a programmer with the cts2. I have a dsp5 switch with EFI Live and the monitor works great. Thanks for watching my videos take care man
thanks for the fast reply.very helpful. keep up with the good videos.
Great videos man
Was wondering if you know if the cts3 monitor will switch the efi live tunes
Yes it will
I have efi live on the cts monitor and when I hit the gas my egts shoot way up and the monitor beeps at me? Do I have a bad probe or is something else going on?
Do you need the EAS if only using EGT Probe?
d.p. will help ..and make it sound alot better..
Agreed.
that cts system has a built in obd code scanner as well?
Marco S yes
Can you have the cts edge without having an egt probe?
+David Braun yes
Any chance that we could see a how to on injector replacement preferably on a LML
+Torqu3d I have access to a LML but this truck is still new if he runs into any injector issues I will let you know
Love this channel
so with this edge cts2 you cant simply turnoff / delete egr ? this pretty much works along side another tuning program?
+Dan k correct the only way to delete the Egr code is when you have efi live installed, finger stick or a H&S tuner. The cts is only monitoring parameters
How is the cts2 still working
Been wanting to get one for my lmm.
Yes! I want one to for my lmm also 🏁 Have you got one yet? Lmm in Colorado 🤠
I want to actually see the cts2 basic drilling and tapping threads for the sensor. Thanks.
Does it come with drill bits and thread tap?
maybe electric grease in the connectors
Is the boost gage plug and play or will I need a additional sensor?
Should have read comments before I asked lol!
I have a 2002 duramax that I need your help with I want that work better than what it is no
Wondering if the lmm will sotf on the screen
What's that deep sound mainly on 08 or 09 duramaxes or powerstroke when you let off the gas it has that deep sound that sounds like it is sucking in air it's a big woosh
+dope_and_sexy_diesels that's the turbo backing of and most downpipes have a restrictive pinch in the pipe that makes the woosh noise
I have my truck already tuned if install this will it mess up my pretuned truck?
No
so you can download a tune off the internet and it will run thru the edge? so you dont need to have efi live?
Youd have to get the Edge Juice module to be able you add tunes to the insight monitor device. But for the price youd be better off just buying a Edge tuner that comes with the tunes built in. Or If you already have EFI Live on a LB7 or LLY you can change tunes on the fly with the Insight monitor.
Yes on the fusion site where you update the cts2 you can just buy the tunes and download them on to your insight I think there like $200 for the tunes best time to buy is around Christmas they go on sale. But you need efi live if your doing any deleting.
how much did the setup run you?
Do you have to tune your truck to put the edge on it
+dope_and_sexy_diesels no sir
Hey when you showed the e.g.t install the install says to install with 90degree to firewall your giving bad info by not showing it proper
Shut up stupid !!
It is 90 degrees turned from the firewall.
when are you gunna do your injector cleaning?
+Cummins&DuraMAxFanatic not sure yet maybe in a few weeks
I have the edge insight pro cts2.. I want to buy efi live tunes from someone do you know if I can install the tunes using just the cts2 or do I need to buy the tool to install efi live?
+hunter D you will need a dealer to install the tunes I used a local Transmission shop
Very cool stickers lol
wouldn't it be better to have the probe on the turbo down pipe ??
+Brian Pena you could but the manifold is always preferred
Ok thanks just ordered mine and was wondering
How would you run the boost ?
where did you get your efi live? and how much did you pay for it?
+Yamaha Rider a diesel shop in Perry, MI it was $600
Truck Master I don't get that. the shop I bought my truck from told me they'd charge me 550 but the autocal is 400 plus the tuning? which I don't know how much that is.
+Yamaha Rider you don't need the auto cal you just need the dsp5 switch
Yea if I have a shop do it. But if I do it myself I do need it right?
Does that monitor have it where you can tune the truck
+Tyler Heins yes but you can only load tunes on this unit you will have to order the tunes separate
Do you pull a trailer?
+New Lion I do but not all the time
What if you already amp steps plugged into the cpu down below?
Robert James you can buy a obd add on to where you plug it in and It ys off so you have 2 spots instead of one
does this monitor boost without an expansion
+nate hagen it monitors boost the way it is you don't need a expansion for that
Sweet! Thanks for the reply
Is there a reason why you picked the edge tuner from the Efi live?
late reply, but not a tuner, this is just a monitor. EFI live tunes like ppei by kory willis for example can be loaded into the truck, then when you plug your insight back in you can go into settings and find the efi live setting, and you select "on" and your #1 through however many tunes will be saved into the insight where you can switch between them as a DSP5 switch would.
@@espiespinosa6280 so your saying this eliminates the need for a dsp5 switch and you can switch between tunes on this monitor instead?
@@daedricpinknblack yessir exactly. I have a durmax with ppei tunes and sadly it doesn't work for me because I have an 06, but 01-05's allows you to use the edge instead of the dsp5
@@espiespinosa6280 damn I have 07 LBZ so it wouldn't work for me either I'm assuming. But thanks anyways for the response!
@@daedricpinknblack yep i have an LBZ as well💪🏼 and no problem man, the insight is still a good monitor to have and imo the dsp5 is probably slightly more convenient anyway
Does this monitor have an odometer option? I have an odometer error
+Royal Attard no it dose not
Is this the Evolution CTS2 or Insight CTS2?
Guillermo Ruiz this is the insight
Will that tuner delete dpf an egr codes?
No
Appreciate you taking the time really nice rig!
do they make a tuner for a gm 6.0 gasser
+bestwrench451 yes but from what im told they don't add as much power
You cant torch a tc probe it frys them just fyi be careful
What's the name of those rims
SuperKiller177 rockstars
Is there a high idle?
+Mississippi Mud Team not on this monitor
Truck Master one more question, does it come with tunes
Mississippi Mud Team Not the insight, from what I understand the insight is just a monitoring device but the cts2 Evolution is the tuner with tunes from the box and if you wanted the max hp and tq the cts2 juice with attitude is your way to go
so no tunes come loaded on it
+gerald white no tunes will be loaded you have to buy them separate
Truck Master that sucks
What are EGT’S
Pete Lageson “exhaust gas temperatures”
Hey I need some help
Can a lly make that deep woosh
+dope_and_sexy_diesels yes only if you change the turbo mouth piece to a LBZ
Truck Master ok do you have snap chat or instagram or Facebook so I can ask you questions about a duramax
I'm afraid to buy a duramax. I hear they get pricey
Not really... i mean unless you wanna deck it out then sure parts are pricier but as far as fix wise theyre great trucks
You have snap chat or insta gram so I can ask you questions about my lly
+dope_and_sexy_diesels no sorry but you can email me joshua.albrecht2@gmail.com
Once again This is so dumb
+verticalbitewing lol
Hey bud, ive got the same kit on my LLY.. if I wanted to add there boost sensor, I just need the sensor kit and the 5 volt kit right?