LSA Supercharger gets a 2.35" upper pulley, 100mm idler pulley, and a 103mm throttle body

I finally upgrade to a smaller upper pulley. Went from a 2.55" to a 2.35". The supercharger pulley hub on the car is a LPE (Lingenfelter) hub. I came across a forum where someone mentioned that Griptech makes a stainless steel 2.35" pulley for the LPE hub and would not require any grinding for clearance. Many of the earlier built LSA powered vehicles had LPE hubs, so that made it easy for me to pulley down in my case without having to change the hub.
I also went with a 100mm idler pulley that will help with obtaining more belt wrap around the upper pulley.
Katech had their manufacturer fix the 103mm throttle body (throttle position sensor was replaced) and installed that back on.
Parts used in this video can be found:
LSA 2.35" Griptec Pulley Stainless Steel
Note: This is for the pulley only designed to work with the LPE 10 bolt hub
dedicatedmotor...
DMS 100mm LSA LS9 Supercharger Idler Pulley
dedicatedmotor...
LSA Supercharger Belt Guide
dedicatedmotor...
Katech 103mm Throttle Body for LS Engines
shop.katecheng...