HIEHA DOUBLE DIN CAR STEREO INSTALLATION

Поделиться
HTML-код
  • Опубликовано: 8 ноя 2021
  • In this video I'll guide you step by step on installing the Hieha Car Stereo. Along with all the additional parts need and tools I used. I also want to Thank the company for sponsoring me for the video. Below I'll leave the link to their products.
    Parts Used in the video:
    Hieha Double Din Car Stereo: amzn.to/3EVCR9Q
    Double DIN Installation Kit: amzn.to/3obxKeX
    Music: www.bensound.com
    If you find this video helpful please like and Subscribe.
    #Hieha #StereoInstallation #AppleCarplay
  • Авто/МотоАвто/Мото

Комментарии • 53

  • @t-money10
    @t-money10 2 года назад +3

    Thanks for this Just ordered one

  • @EvilSnipa
    @EvilSnipa 2 года назад +2

    Thank you my brother!

  • @zhensonglu736
    @zhensonglu736 2 года назад +1

    Great, it is real useful video, thanks.

    • @fixingguide7686
      @fixingguide7686  2 года назад

      No problem. Thanks for watching, and don’t forget to subscribe for more new contents.

  • @mikelobiox
    @mikelobiox 2 года назад +1

    USB port is just for power or can I use for listen music in a flash drive?

  • @eddaniels9880
    @eddaniels9880 2 года назад

    what sized wire taps did you use/

  • @alan4631
    @alan4631 2 года назад +2

    Hello
    I also have one of the car stereo too, can you make an installation video for me?
    thanks

  • @frankhill3112
    @frankhill3112 2 года назад

    I need to know how to turn off the demo mode?

  • @willglong1437
    @willglong1437 Год назад

    when I put my car into reverse the unit displays a message that the video has been turned off for safety concerns. how do I turn the video back on?

  • @donatogonzalez8650
    @donatogonzalez8650 Год назад

    Brown color have no label you know where can I connect ?

  • @donatogonzalez8650
    @donatogonzalez8650 Год назад

    El cable café a qué se conecta ?

  • @jbrrozo2283
    @jbrrozo2283 2 года назад +2

    Thanks for your video. I do have a little crisis on the reverse camera function. I already have an existing camera installed (also an after-market that was installed with the stereo that I just replaced with this Heiha stereo). There's was nothing wrong with the camera just the stereo so I used the same black and red wire with the yellow RCA. I wired the red to the pink wire of Heiha but somehow when I turn on the car all I see right away is the reverse camera and I try driving it but the screen didn't go away. I went to re-open everything and just disconnected the yellow RCA from the back and unwire the red and pink due to disappointment. My son was okay just with the stereo and Carplay alone for the music but my concern is also safety.
    Is there anything I miss? Is there a quick fix to this? Please advise.

    • @fixingguide7686
      @fixingguide7686  2 года назад

      The camera staying on while you start the car and drive probably because it was wired to the wrong connection. Make sure you wired the camera to reverse light wire so does the camera comes on whenever you shift the gear to reverse. I have another video on how to install reverse camera in details please check it out if you have any questions.

  • @panostz3026
    @panostz3026 2 года назад +1

    How can I take off the lines that help you park in the backup camera? They don't help me

    • @fixingguide7686
      @fixingguide7686  2 года назад

      If your trying to have the back up camera turn on whenever you reverse then connect the camera wire with reverse light.

  • @aomardidi
    @aomardidi 2 года назад

    Does your android apps works for you? I have some trouble connecting to my radio. Any advice? Or video you can make. I have the same radio. Thanks

    • @fixingguide7686
      @fixingguide7686  2 года назад

      Yeah my apps working fine, if you think you did everything right and apps still not functioning you can reach the product owner about it.

  • @jbrrozo2283
    @jbrrozo2283 2 года назад +1

    What about yellow wite for the connector (battery)? Do you just leave that unwire?

    • @fixingguide7686
      @fixingguide7686  2 года назад +1

      I left one wire that is yellow and black unwired. It came like that factory. Hope that helps. Please like and subscribe for support. Thanks

    • @jbrrozo2283
      @jbrrozo2283 2 года назад +1

      @@fixingguide7686 I tried both the red and yellow to connect with the red on the connector as well as just red to red and yellow to yellow and it both works. The reason why I did that because the previous install was like that plus it says on the yellow (from the connector) battery 12v. but evetually I went back to the original setup like what you have here in the video.

    • @MotoMiles
      @MotoMiles 2 года назад

      @@jbrrozo2283 I have red and yellow to red wire ..no display .. maybe try yellow to yellow and red to red?

    • @markbrowning4334
      @markbrowning4334 5 месяцев назад

      It doesn't help that you're trying to explain this in English while you can't actually speak English.
      You completely glossed over the importance of some wire splicing with the white wire harness. Where did that come from?
      The harnesses that came with the new unit were black, but you're showing some wire splicing on a white harness.
      Thanks for trying anyway. I guess a more competent stereo guy might be able to follow your instructions, but the language barrier, different car, and glossing over valuable instructions was lost on me.
      I'll assume that I'm the lacking party here though.

  • @thonytopox
    @thonytopox 2 года назад +1

    Hi! do you have the upgrade firmware for the apple carplay ? Car Stereo - Hieha-CZ-01 Firmware. Greetings from Costa Rica!

  • @henryprince2084
    @henryprince2084 2 года назад

    I connected the red and yellow wire together and have no memory if I separate them I have no power what can I do to make this work

    • @kitkimbrough1145
      @kitkimbrough1145 3 месяца назад

      Hopefully you figured it out, but just incase yellow goes straight to battery, and red goes to any ignition power on wire, so it turns off with ignition, but keeps memories!! He did it wrong, and Just connected them together!!

  • @Aqr95
    @Aqr95 2 года назад +1

    What area are you in? Do you know of people who can do this in the NC or SC area? Thanks.

  • @xokie666
    @xokie666 Год назад

    My car is totally wired differently I guess it’s been done over a dozen times

  • @jamesrutherford121
    @jamesrutherford121 2 года назад +1

    I have a 04 impala and I put a double den in it and it wont turn on

  • @MotoMiles
    @MotoMiles 2 года назад

    Man I can’t get power tested it on battery it’s fine but do you need to connect red to red wire and ground black to frame ?

    • @henryprince2084
      @henryprince2084 2 года назад +1

      The only way I got power was to connect red and yellow together and connect to other red black to black but no memory

    • @MotoMiles
      @MotoMiles 2 года назад

      Hmmm its so strange i use the maintainer and connect the re and yellow to the positive and it goes on fine and black wire to the negative and it powers on.. when i connect the red and yellow to the red on the harness and black to black i get nothing..do you think i need a better ground. And thanks for the quick reply. Lol my front seat looks like a mechanical mess and I’m so stuck .

    • @henryprince2084
      @henryprince2084 2 года назад +1

      Idk for sure I’m lost to can’t get no memory

    • @MotoMiles
      @MotoMiles 2 года назад

      I know hat ya mean. It’s crazy i have the same radio .. lol i wish it would just work.

    • @henryprince2084
      @henryprince2084 2 года назад +1

      Do it like he did it in the video it works but don’t have any memory at least not on mine good luck

  • @YonkoDeezy
    @YonkoDeezy 11 месяцев назад

    Hey idk if you have a solution but the screws don’t fit for my stereo

    • @mugiwaratony317
      @mugiwaratony317 10 месяцев назад

      U might need a tool kit that fits your car, hope this helps

    • @YonkoDeezy
      @YonkoDeezy 10 месяцев назад

      @@mugiwaratony317 thank you! I went to a hardware shop and had to find some screws that would fit and the radio works and looks good had it installed for a lil over a month now

  • @demetriusdrayton5793
    @demetriusdrayton5793 2 года назад +1

    My rear camera not working

    • @fixingguide7686
      @fixingguide7686  2 года назад

      Hey, i have a video on how to install rear camera, you can watch it and try to solve your problem. Thanks

  • @walterramirez797
    @walterramirez797 2 года назад +1

    Pues yo tengo uno pero no trabaja ni madres

  • @naifay-car
    @naifay-car Год назад

    Hello, we have a similar product that we hope you can display together. Could you provide us with your contact information?