Since you have had that all apart, could you tell me what the wire pin out is for the dash and rear door speakers are on the second bose plug? Also do you know if the front door and dash speakers are crossed over in the bose amp? IE the door speakers only getting bass, mid bass and the dash getting only mid range and highs?
LLJ customs has the harnesses to bypass bose active noise cancellation and a t harness that is plug and play you can hook right to the factory amp and play your subs no problems
They're customer service sucks though. I bought the harness and wasn't working like it should and they never helped. Also ordered an amp rack that never came even after 4 months. I had my bank refund me cause they never reply. Now they dont sell to me
Es cierto yo lleve mi troca al car toys y me isieron puras marranadas ahora lo ando asieso yo mejor oye bro la señal para convertir en rca los agarraste de las puntas q están en la parte del amp
Why are people tapping into wires on the output side of the amplifier. Wouldn't it make more sense to tap the signal wires coming from the head unit to the amplifier. That way you're getting a raw clean signal from the head unit that's not already been processed through the amplifier. Tapping into output side of the amp means your amplifying and already amplified signal right?!
Yes you are correct on this system when it has a Bose system the output signal from the radio is coaxial digital output not like the regular non Bose system
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
where did you hook your line output converter to to give signal to the aftermarket amp
Hey bro do know which 2 pin are connected in the brown plug in the bose amp
Show the subwoofer and how to get it
Im guessing there is an amp back there for mine though i have base staereo.
Damn great video very helpful bro 👍🏽👍🏽
Very Knowledgeable Appreciate This 👍🏾
How do you lower the volume of the blinkers
You get the signal from the rear speakers not the front the turn signal chime is only on the front speakers and top of the dash
Since you have had that all apart, could you tell me what the wire pin out is for the dash and rear door speakers are on the second bose plug? Also do you know if the front door and dash speakers are crossed over in the bose amp? IE the door speakers only getting bass, mid bass and the dash getting only mid range and highs?
did you run your leads from your head unit to the back to connect the wires that you cut from the bose amp?
Nothing to the head unit everything you need which is the twisted wires are the wires going to the door and dash speakers
is that a aftermarket harness? or that the factory one that u cut?
LLJ customs has the harnesses to bypass bose active noise cancellation and a t harness that is plug and play you can hook right to the factory amp and play your subs no problems
They're customer service sucks though. I bought the harness and wasn't working like it should and they never helped. Also ordered an amp rack that never came even after 4 months. I had my bank refund me cause they never reply. Now they dont sell to me
Ordered a harness off of su thump and it came in a week I’m gonna install it will probably make a video
@@dudejuliobrohowd that harness work out?? How much was it?
@@sergioaleman8911 These Guys are not really business people, Very lay back Guys. This is the USA. Make things Happen.
How much was that lift?
It was $1700
Did you get your power for the jl interface from the Bose amp ?
I will post a video and will show you exactly where I got it from thanks for watching
Shoot horizontal, look at all that wasted frame. Vertical is only a tik tok requirement.
So the video should be called
"How to take off your back seat and cut speakers"
Sure, you can call it how ever you want, sounds really good
Llevalo donde lo conecten sera mejor ,.....
Ago mejor trabajo que esos lugares
Es cierto yo lleve mi troca al car toys y me isieron puras marranadas ahora lo ando asieso yo mejor oye bro la señal para convertir en rca los agarraste de las puntas q están en la parte del amp
Hi i got a question
Why are people tapping into wires on the output side of the amplifier. Wouldn't it make more sense to tap the signal wires coming from the head unit to the amplifier. That way you're getting a raw clean signal from the head unit that's not already been processed through the amplifier. Tapping into output side of the amp means your amplifying and already amplified signal right?!
Yes you are correct on this system when it has a Bose system the output signal from the radio is coaxial digital output not like the regular non Bose system