Samsung Galaxy S7 Edge Screen Repair, Teardown and Reassemble Guide - Fixez.com
HTML-код
- Опубликовано: 21 сен 2024
- Visit Fixez.com for all of the DIY Galaxy S7 Edge replacement screens, parts and tools you need to fix your Samsung cell phone quickly, and affordably. www.fixez.com/...
If you need your S7 Edge repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your Samsung device for you. They are available Monday - Friday, 9am to 5pm PST.
Subscribe to our RUclips Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
Samsung Galaxy S7 Edge Screen Repair, Teardown and Reassemble Guide Video Transcription:
Warning:
You are performing this repair at your own risk
We claim no responsibility for any damages that might occur
Find the premium tools used during this DIY repair here: www.fixez.com/...
Step 1
Power down your Samsung Galaxy S7 Edge phone.
Step 2 (Samsung Galaxy S7 Edge SIM Card and microSD Card Tray)
Remove the Nano SIM card and microSD card tray.
Step 3 (Samsung Galaxy S7 Edge Rear Panel)
The Samsung Galaxy S7 Edge rear panel is glued on solidly and is a tight fit within the frame. Apply heat to soften the adhesive.
With the precision knife create enough space to insert a playing card.
Use playing cards to slice through the adhesive and help carefully separate the rear panel from Galaxy S7 Edge phone. Apply additional heat as needed.
Step 4 (Samsung Galaxy S7 Edge Antennas, Wireless Charging Coil and Loudspeaker)
Remove the following 12 Phillips screws.
With the spudger, pry up and remove the 3 modular pieces. These individual components are connected to the motherboard by way of tiny spring contacts, they include the S7’s antennas, loudspeaker, and wireless charging coil.
Step 5 (Samsung Galaxy S7 Edge Battery)
Detach the S7Edge battery from the motherboard.
The battery is well wedged and adhered in place. Use triangle opening tools to work around the battery and set it free from the adhesive securing it to the frame.
Remove the 3000 mAh Galaxy S7 Edge battery from the phone.
Step 6 (Samsung Galaxy S7 Edge Motherboard)
Disconnect the bevy of cables from the Galaxy S7 Edge motherboard.
Lift up the motherboard and detach the daughterboard connector on its underside, then remove it from the smartphone.
Step 7 (Samsung Galaxy S7 Edge Front-Facing Camera and Rear-Facing Camera)
Detach and remove the S7 Edge 5-megapixel front-facing selfie camera.
With the spudger, detach the 12-megapixel Galaxy S7 Edge rear-facing camera and remove it from the motherboard.
Step 8 (Samsung Galaxy S7 Edge Vibrator, Earpiece Speaker and
With the tweezers, carefully remove the S7 Edge spring-contact applied vibrator.
Pry up and remove the earpiece speaker.
Use the tweezers to peel up and remove the proximity sensor, ambient light and notification LED cable.
Step 9 (Samsung Galaxy S7 Edge Power Button Cable and Volume Buttons Cable)
Remove the power button cable, and then the bracket from the side of the S7 Edge frame.
Utilizing the tweezers, pry up the volume buttons cable, followed by the small bracket, and remove them from the S7 Edge phone.
Step 10 (Samsung Galaxy S7 Edge Headphone Jack)
Disconnect the signal cable and headphone jack cable from the S7 Edge daughterboard.
Remove the following Phillips screw.
Easily remove the S7 Edge headphone jack, complete with rubber seal.
Step 11 (Samsung Galaxy S7 Edge LCD Screen and Digitizer Assembly)
Use the heat gun warm up the adhesive securing the Galaxy S7 Edge LCD and digitizer assembly to the frame.
With the precision knife, carefully create separation and insert a playing card to start slicing through the adhesive.
Take your time and apply additional heat as needed.
Once you have sliced through the adhesive, be mindful of the home button and bottom soft buttons when decoupling the S7 Edge display assembly from the frame.
Step 12 (Samsung Galaxy S7 Edge Home Button)
Peel up the adhesive securing the S7 Edge home button cable to the frame.
Feed the cable thru the frame and remove the home button.
Step 13 (Samsung Galaxy S7 Edge Micro USB Port, Microphone and Soft Button Cables)
Peel up the S7 Edge soft button LED cables.
Remove the following 2 Phillips screws.
With the tweezers, carefully remove the Samsung Galaxy S7 Edge micro USB Port assembly from the frame. The assembly also includes the primary microphone and soft button cables. 
Наука
![Samsung Galaxy S7 Edge - Screen replacement [including reassembly]](http://i.ytimg.com/vi/CoQGSpqYFy8/mqdefault.jpg)
The best Galaxy S7 edge teardown guide so far.
His voice is sexy... I'm not gay, I'm WIERD.
Really??? How about the sticking it back together part?? Low and behold...suddenly there was magic double sided tape applied along the edges of which there was no mentioning whatsover....
Yes indeed.
I LOVE YOUR REPAIR 🙂 I WATCHED THE VIDEO FROM BANGLADESH COUNTRY!
what adhesive is used for the lcd?
Hello...
I just want to tell that you are the best
You explain very well and very nice
But I have a question
At the back cover of samsung s7 edge I saw that at the bottom of the phone is a little gap (1mm) and I saw that if I try to pull the back cover down, up, left, right is moving a little... Can you please tell me why is moving and if is a problem, like damaging the ip68, or peeling off the back cover, or is normally to move a little bit!?
And what kind of adhesive is keeping the back cover at his place, and why you have to worm it well before peeling!?
If you don't worm it is not possible to pull it off!?
Thank you
+Emanuel Busila There should not be any gap that large on the back. From the factory there is a very strong adhesive that will require heat to separate the back glass without damage.
15:55 reassembly
the main thing is where to buy the replacement glass from ,and the cost of it
Damn you Samsung why you have to be so difficult
OMG so Easy , thanks !
hahaha
can you please made the video for how to replace the Galaxy S7/S7 Edge SIM Card Slot/Reader
does this repair using your supplied parts still retain the water/dust resistance?
Once opened your device will no longer be water resistant.
После такой сборки телефон перестаёт быть водозащищённым. After such assembly phone loses protection for IP68.
Has anybody tried this? With the right tools and this tutorial how risky/difficult is it? Does it stick together after this?
+Cassandra Price With no prior experience this is a difficult device to repair. It's definitely doable for the average DIYer.
i was wondering if it is still waterproof ?
Just wondering why you didn't apply any adhesive when re-assembling. What did I miss?
It doesn't show any reassembly.
hello, where can i find the red and white cables? for at mobile one!!
Can the home button gasket be reinstalled when putting the phone back together? A repair service I'm using is insisting that it's not possible, and that all the replacements from China render the button inoperable.
are the motherboards interchangeable between the various models?
the motherboard are not interchangeable.
Are you using snapdragon or Exynos? I noticed the snapdragon motherboard has 3 holes to insert the cellular wires in, meanwhile exynos has 2.
+Fixez.com
Not waterproof S7 Edge better then not working S7 Edge.
Ewgeniy Muraviov facts
where do i buy a replacement screen?
+Hector Velasco We have the displays instock on our site.
www.fixez.com/store/samsung/samsung-galaxy-s7-edge
ummmmm... might as well be a surgeon here geeeez!!! think I'll pay sum1 to do this craziness, tooooooo much work, then ya gotta put it all back, NO THANKS 😆
How much u charge to fix
my phone fell exactly on the volume up button and the button is jammed in. does it make sense to make somebody fix, or just usr it as is?
collwatt use it as it is
use a third party app to control your volume instead, it's an on- screen volume control, very convenient too, i never use the physical volume button
Is there any way to replace the frame without a complete teardown of the phone?
You need to tear down LCD screen assembly.
Unfortunately no you need to completely disassemble the phone to replace the frame.
after the display replacement will the device remain water proof?
jhedge2106 I got my s7 edge screen replaced from the authorised service Center and even then it should be the case.
jhedge2106 so since my display is replaced by Samsung service Center means my phone is still water resistance.
NY
jhedge2106 that's the only one in NYC
No. He replied before on other devices
how can I make the phone factory waterproof?
Waterproof glue?
Ghostwalker CIA I think it's called loca glue or something
What is problem
dose the phone remane whater proof ?
Not really, I imagine... How could it after breaking the water seal?
by making sure the water seal is in place again before putting it back together again. it's not rocket science...
+Stev A I don't think it's just a rubber bushing for water socket or something. It is close to a rocket science. Why didn't he leave a instruction or link. I would like to know Mr.
Where can I get a Motherboard?
+Erik Pre We don't sell motherboards mostly displays and small parts. I can only say to be careful when buying a used motherboard some people sell blacklisted boards or boards with previous water damage.
I think you don't wanna do this thing by yourself because it may not be a waterproof phone any more
definitely not water resistant anymore
Not sure if u have noticed, but if u place the adhesive tape properly then I still think it will be water resistant. I really Doubt that it will remain waterproof tho
They didn't take this phone apart on video, this phone was taken apart before, fake
Playing cards for when you fuck your phone and have to resort to solitare :(
could you do this any slower?
If you go to the setting button on the video there is a speed option, click that and you can make the video much slower :)
TheSparton1177 and if you watch it on the app?
To już nie to samo jak oryginał.👎
just give it to the dogs to play and buy an iphone
just fck your self son of bitch
Raul a suck i phone user!