How to replace spark plugs on 2009 & 2010 nissan altima

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 32

  • @martinmendez9880
    @martinmendez9880 2 месяца назад +1

    VIDEO IS HELPFUL SO i THANK YOU . JUST ONE QUESTION-WHY DID YOU MAKE THE VIDEO DURING THE NIGHT HOURS? HELLOOOOO!

  • @dallintaggart482
    @dallintaggart482 3 года назад +4

    From start to finish very nice.

    • @RBTheMechanic
      @RBTheMechanic  3 года назад

      Thank you bro!!! I keep it nice and simple

  • @Knifesmitty1031
    @Knifesmitty1031 Год назад +1

    Straight to the point thank you 🎉

  • @davidpantaleon2166
    @davidpantaleon2166 3 года назад +2

    Thank you so much for your video God bless you my friend

  • @elizabethsimone2086
    @elizabethsimone2086 Год назад +1

    Hey I’m not sure if you’re gonna answer. But I have a 2008 Nissan Altima 3.5 v6, I can find the spark plugs, but can’t find wires? Does it have wires or something else?

    • @RBTheMechanic
      @RBTheMechanic  Год назад +1

      Hey Ofc I answer!! Anways watch this video ur car has coil packs under it is spark plugs u don’t change coils unless they r bad. Should be easy job!! This video is diffrent year but process is very much same and diffrent part number tho here’s the video ruclips.net/video/UrPINQB9Gic/видео.htmlsi=wYLcv_gCQosam4oN

  • @alejandrooo805
    @alejandrooo805 2 года назад +1

    Do you have to torque the spark plugs back in or can I just tighten them by hand thanks 🤙🏾

    • @RBTheMechanic
      @RBTheMechanic  2 года назад +2

      If u have torque wrench torque it

    • @alejandrooo805
      @alejandrooo805 2 года назад +1

      @@RBTheMechanic I have a 2010 Nissan Altima 2.5 coupe and it got the check light engine I failed smog came out to be a p0303 code I replaced all ignition coils and spark plugs trying to fix at the moment

    • @RBTheMechanic
      @RBTheMechanic  2 года назад

      @@alejandrooo805 that’s cylinder 3 mid fire

    • @alejandrooo805
      @alejandrooo805 2 года назад

      @@RBTheMechanic what would you recommend me doing I replaced the ignition coils and spark plugs all 4

    • @RBTheMechanic
      @RBTheMechanic  2 года назад +1

      @@alejandrooo805 try swapping the coil to diffrent cylinder see if ur changes other wise u need to check to see if ur cylinder number 3 had compression check fuel injector in working order and if u have Pauls in coil wiring and injector

  • @Timingchaff
    @Timingchaff Год назад +1

    What do you need to change if the sparkplug has oil? And how you do it?

    • @RBTheMechanic
      @RBTheMechanic  Год назад

      Valve cover gasket and the grommets in the center

  • @RBTheMechanic
    @RBTheMechanic  5 лет назад

    I’ll let you know tomorrow

  • @erikhernandez2617
    @erikhernandez2617 3 года назад +1

    How do you know how much to tighten the new spark plugs ?

  • @brentlee4767
    @brentlee4767 Год назад +1

    Good mornin

  • @flyinlo1474
    @flyinlo1474 5 лет назад +1

    thanks for this video!! At 2:45 what kind of gasket is bad if there is oil on the coil?

    • @RBTheMechanic
      @RBTheMechanic  5 лет назад

      Tim Durham That would be the grommets with valve cover gasket

    • @flyinlo1474
      @flyinlo1474 5 лет назад

      @@RBTheMechanic Thank you! again great video.

    • @flyinlo1474
      @flyinlo1474 5 лет назад

      @@RBTheMechanic I have my valve cover removed. I have a new cover gasket as mine was leaking oil. The #1 sparkplug hole was full of oil. # 2 had a smidge. #3 and 4 were dry.
      Can the 4 seals in the holes that slide over the spark plug tube be replaced or is it better to just get a new valve cover?
      I only 2 or 3 cylinders were firing and I suspected the oil would be in the spark plug tube. I am on the phone with Advanced Auto and they do not have the Spark Plug Tube seals. Not sure where these can be found other than the dealer :(

    • @RBTheMechanic
      @RBTheMechanic  5 лет назад

      Tim Durham they are called the grommets night have to buy valve cover set. Maybe u can find it on eBay or amazon

  • @latonyaholmes2866
    @latonyaholmes2866 3 года назад

    Do you have to measure for the gap?

    • @RBTheMechanic
      @RBTheMechanic  3 года назад

      You can measure it but these plugs I buy have perfect gapping