Hey, did you get to some good settings for it? I just picked up my Wave 3 and can’t find the sweet spot with the settings for me. If you did, do you mind sharing your settings?
From my understanding, you cannot use any microphone as you pleas. You still need a compatible Elgato device to run the software. My brother tried using wave link for his Yeti mic. It only works for him when I plug in my Wave 1 into his PC, which he can then add the yeti as an input. However, the moment I disconnect my Wave 1 from his PC, he can no longer use Wave Link.
@@StreamGearTalkThat is unfortunate. He just loves the functionality of Wave Link. Only viable option for him to use is the stream deck but even then he’d only be buying just for the sake of using his mic.
I believe I mentioned in the video the 4 devices that enable use of wavelink, at which point you can use any mic to take advantage of it. In this case I'd recommend the stream deck plus.
The elgato noise suppressor also cut out off the voice of me when I set it to 1%. However I think it automatically adjusts after you talk for a while and won't do it anymore.
I have the elgato wave 3 and i dint know hoe to set up the filters to let it sound amazing pls help me indont understand which fiters and settings inhave to use and how to set :( can you do a video for the wave 3 pls ? :( For example, whenever I activate the noise reduction filter, my voice sounds like I'm lisping and when I speak, words are often cut off. I just don't know what to do anymore
@@StreamGearTalk That's nice of you, but I would like to know the best settings for the filters specifically for my Elgato Wave 3. Even with the video, it's difficult to set up a microphone because every microphone behaves differently. That's too complicated for me. There must be someone who already has an Elgato Wave 3 and can tell me their settings that work really well for them.
I have a wave 3 i just dont know what settings would make my voice sound clear or not, I'm just having lots of trouble on deciding what is good for my mic.
Why do you use a Cloudlifter when the Wave XLR delivers enough power/gain itself? The SM7B needs around 60 dB, and the Wave XLR provides up to 70 dB. Using a Cloudlifter in this setup only reduces the audio quality and introduces unnecessary noise.
ruclips.net/user/shorts3W_aeNHe7w4?feature=share I agree the cloud lifter is not necessary. I've had this stance for a long time. I disagree, the cloud lifter does not reduce audio quality, it sounds just fine to me. I agree it does sound better without when using vsts/ noise suppression.
@@StreamGearTalk For the normal consumer, you probably won't hear any difference at all, but if you check how the audio waveforms change, you can see a huge difference. Noise suppression also reduces quality, not as drastically, but it still has an impact. I’ve seen this firsthand through my previous work with Elgato and Shure, as well as from testing with the audio team at Shure. This is where I base my opinion on, alongside my own testing and the insights gained from working with the Shure audio team.
@@Jesterttv for Shure, pun intended. My content is aimed at the normal consumer. Of course if you're talking now the not so average consumer/creator then that's a different conversation! Average person doesn't have the ears that you probably do plus the added audio from games etc masks sole of the noise.
Hey this is a great video but when I use the elgato noise removal I don't have the slider options for threshold or release. I've updated to the latest version.
@@AleksTufte @StreamGearTalk I also see the same thing as you, but I am using a Wave XLR. The Elgato noise cancellation has no settings beyond on/off. They should have those settings those based on the changelog for the plugin earlier this year. So we are both experiencing some bug with the software where we cannot see the settings.
I’ve been experiencing my mic cutting out for a split second or some crackling and just slight noises that shouldn’t be in my audio during videos. Thought it was wave link/my mic effects but it does it with them on and off. I tried using a different usb cable and that wasn’t it either. Even used a different mic and I’m still having the same problem. Do you know how I can fix this and just have clean, crispy, audio 🤦🏽♂️
Hey brother i have a quick ? i have the shure mv7 plus and im using the usb side of things into wave link cause i have a streamdeck plus.but i was wondering if i should download the shure motiv app to set up my mic and the use that on the wave link or forget about the motiv app and just do everything on the wavelink
It's honestly a matter of preference. Motic does some nice things but I prefer less apps in use. I'd say try it out both ways and see what you like! And let me know what you go with
any idea why my mic is "ECHOI" is it because im talking to monitor ale sound is bouncing of it? i have elgato wave 3 and its 45 degrees on the right of my face 30-40cm away and in front of my is monitor and behing it is wooden acoustic panel. what could be wrong?
Question, I set up my Shure SM7b with the new XLR dock this past week and I keep getting this static pop sound. I can't seem to figure it out to save my life and with the rodecaster I used previously I never had an issue. Any ideas?
how do you pass the software installation, when it says connect you elgato microphone? you didn't show that , can you show all the way you installing a different microphone full installation? i am stucked on connect compatible device?!? why didn't you show that and jump straight away to where things working?
Great video, it just stinks when I get into parts of these types of videos were its Pc only software. Is there any hope for Mac users? I feel like I can never find one.
do the settings save to the device you are using with wave link? i have my mic connected to wave xlr and configured. but i then connect my wave xlr to my ps5 and i have no idea if the settings carry over
Ok that's an excellent question. Here's what I know. The settings do save to the XLR but I don't know if it carries over to a console. In theory it should. Easy way to test this is to use the noise removal plug in. If it's on and working when connected to PC, then connect to ps5 and you hear all your noise etc then it doesn't transfer. I can test this when I get home.
@@StreamGearTalk thanks for your response, that would be great! i will try it out too later. check all over for any advice on this but i have not come across anything that helps.
One device I think should do this is the rode podmic USB. When used via USB you can save all processing to the mic. Now, what I have seen though is that the saved settings don't always work as well on console. There's something odd about how the PS5 communicates with a dsp device.
@@StreamGearTalk funny enough, the mic im using is the maono pd400x which also saves settings via usb but i find it very quiet on the ps5 and when i turn it up theres a lot of background noise. the software is nice but im not sure how well the noise gate/compressor work as when i test it on pc my voice is cut off. i could figure it out by playing around but the wave link works better and is easier to use. the settings do save on the wave xlr, but i just need to figure out if the plugins also save and carry over to another device.
i have wasted like 3 hrs trying to get my audio to sound right...i just keep hearing low static in my recording..I just cant figure it our..i have tried like 8 other elgato plugs vt and still the same...the static wont go way or I get an empty room sound. so fustrated waster 3 hours on this.
Thank you, just picked up a Wave 3 and this helped me set up the EQ and understand it intuitively, as my wife laughed as I adjusted it.
Congrats on the new mic!
Hey, did you get to some good settings for it? I just picked up my Wave 3 and can’t find the sweet spot with the settings for me. If you did, do you mind sharing your settings?
@@Bogdan-gi9yx Everyone is going to have different settings. Its best to play around with it and find what you like.
@@TyNeyedly Okk, thank you!
Ahhhh i caught that Kingdom Hearts reference when you were talking about compression 😭🫶🏼
Can you please do a step by step like that on the new xlr dock for the stream deck plus
Great video! Is there any reason you chose the elgato noise removal over the nvidia noise removal? Just wondering.
btw...you have a lot of random static throughout your video.
I'm using the Sennheiser HD560S and the Topping DX7+ and can hear it quite clearly
I heard it too on my iPhone
@@kevinmichaellopez ok so it's a recording issue
Can you do this for steelseries sonar as well?
can you release the preset for the SM7b ? cuz its hard to copy the settings
Let's see if this works.
drive.google.com/drive/folders/1Jb_eDtoHcWjuSGnw8zwXlzSSlf2Y-nBN
Oh this is super perfect! I may have to switch back to wave xlr from rodecaster duo (debating).
How do you listen to your mic with the eq thats effects
From my understanding, you cannot use any microphone as you pleas. You still need a compatible Elgato device to run the software. My brother tried using wave link for his Yeti mic. It only works for him when I plug in my Wave 1 into his PC, which he can then add the yeti as an input. However, the moment I disconnect my Wave 1 from his PC, he can no longer use Wave Link.
This is correct. In order to use wavelink, you must have 1 of 4 wavelink devices. Without 1 of those, no wavelink
@@StreamGearTalkThat is unfortunate. He just loves the functionality of Wave Link. Only viable option for him to use is the stream deck but even then he’d only be buying just for the sake of using his mic.
I believe I mentioned in the video the 4 devices that enable use of wavelink, at which point you can use any mic to take advantage of it. In this case I'd recommend the stream deck plus.
13:46 why did you expose Thor's preset
The elgato noise suppressor also cut out off the voice of me when I set it to 1%. However I think it automatically adjusts after you talk for a while and won't do it anymore.
best wavelink tutorial, Thanks it helped me a lot
Thank you!!
Hi, would there be any difference regarding the arrangements of the effects? should the compressor comes first before the EQ?
I've always wondered this myself and I've tried different "load orders" and have found no difference. I could be wrong but no difference heard at all
@@StreamGearTalk ok thank you for your input...
I have the elgato wave 3 and i dint know hoe to set up the filters to let it sound amazing pls help me indont understand which fiters and settings inhave to use and how to set :( can you do a video for the wave 3 pls ? :(
For example, whenever I activate the noise reduction filter, my voice sounds like I'm lisping and when I speak, words are often cut off. I just don't know what to do anymore
Boom. ruclips.net/video/5gQp4ks4T2I/видео.html
@@StreamGearTalk That's nice of you, but I would like to know the best settings for the filters specifically for my Elgato Wave 3. Even with the video, it's difficult to set up a microphone because every microphone behaves differently. That's too complicated for me. There must be someone who already has an Elgato Wave 3 and can tell me their settings that work really well for them.
@@StreamGearTalkYou have a shure sm 7b thats not anwave 3… i cant not use your settings.
Older video but for the wave 3. ruclips.net/video/iMqo7KfJp-s/видео.html
Your interface is popping and clicking frequently, you might want to check and adjust your buffer size
I cant open that gain tab 🥲 i only get the choice to switch audio inputs
nice vid man. good job
Thank you!!!
I just cant get Nvidia Broadcast to work inside WaveLink its driving me crazy cause the plugin ist causing my audio to crackle like hell
I have a wave 3 i just dont know what settings would make my voice sound clear or not, I'm just having lots of trouble on deciding what is good for my mic.
Why do you use a Cloudlifter when the Wave XLR delivers enough power/gain itself? The SM7B needs around 60 dB, and the Wave XLR provides up to 70 dB. Using a Cloudlifter in this setup only reduces the audio quality and introduces unnecessary noise.
I was about to comment this too. I’m planning on getting a wave XLR interface and wanted to confirm this
@@kevinmichaellopez Get it, works like a charm.
ruclips.net/user/shorts3W_aeNHe7w4?feature=share
I agree the cloud lifter is not necessary. I've had this stance for a long time. I disagree, the cloud lifter does not reduce audio quality, it sounds just fine to me. I agree it does sound better without when using vsts/ noise suppression.
@@StreamGearTalk For the normal consumer, you probably won't hear any difference at all, but if you check how the audio waveforms change, you can see a huge difference. Noise suppression also reduces quality, not as drastically, but it still has an impact. I’ve seen this firsthand through my previous work with Elgato and Shure, as well as from testing with the audio team at Shure. This is where I base my opinion on, alongside my own testing and the insights gained from working with the Shure audio team.
@@Jesterttv for Shure, pun intended. My content is aimed at the normal consumer. Of course if you're talking now the not so average consumer/creator then that's a different conversation! Average person doesn't have the ears that you probably do plus the added audio from games etc masks sole of the noise.
Hey this is a great video but when I use the elgato noise removal I don't have the slider options for threshold or release. I've updated to the latest version.
Are you using Elgato's noise removal or the nvidia one that's also in the elfato marketplace?
@@StreamGearTalk Elgato Noise Removal. The only difference I have is that I'm using the wave 1 Microphone instead of the Wave XLR
@@AleksTufte @StreamGearTalk I also see the same thing as you, but I am using a Wave XLR. The Elgato noise cancellation has no settings beyond on/off. They should have those settings those based on the changelog for the plugin earlier this year. So we are both experiencing some bug with the software where we cannot see the settings.
If you can do this for those of us who don't have elgato products that would be greatly appreciated!
Sure thing I can try. What do you use for your mic audio?
@@StreamGearTalk I have an MV7 as my back up but I have as my main mic I recently got an SM7B and a vocaster Duo interface. THank you!
If you use obs I made this one like two months ago
ruclips.net/video/LT9DfTlMaQg/видео.htmlsi=JlRynplD8PcUyn9D
I’ve been experiencing my mic cutting out for a split second or some crackling and just slight noises that shouldn’t be in my audio during videos. Thought it was wave link/my mic effects but it does it with them on and off. I tried using a different usb cable and that wasn’t it either. Even used a different mic and I’m still having the same problem. Do you know how I can fix this and just have clean, crispy, audio 🤦🏽♂️
Even this Video has it like a lot - I couldn't watch it to the end because it triggered me so much ;_;
Great Video nice work.
Thank you!!
Hey brother i have a quick ? i have the shure mv7 plus and im using the usb side of things into wave link cause i have a streamdeck plus.but i was wondering if i should download the shure motiv app to set up my mic and the use that on the wave link or forget about the motiv app and just do everything on the wavelink
It's honestly a matter of preference. Motic does some nice things but I prefer less apps in use. I'd say try it out both ways and see what you like! And let me know what you go with
any idea why my mic is "ECHOI" is it because im talking to monitor ale sound is bouncing of it? i have elgato wave 3 and its 45 degrees on the right of my face 30-40cm away and in front of my is monitor and behing it is wooden acoustic panel. what could be wrong?
Question, I set up my Shure SM7b with the new XLR dock this past week and I keep getting this static pop sound. I can't seem to figure it out to save my life and with the rodecaster I used previously I never had an issue. Any ideas?
Double check all connections. Gain too high? Try different USB port. Some ideas. Let me know if any worked
how do you pass the software installation, when it says connect you elgato microphone? you didn't show that , can you show all the way you installing a different microphone full installation? i am stucked on connect compatible device?!? why didn't you show that and jump straight away to where things working?
I appreciate your comment. What wave compatible device, of which I named quite a few, do you own?
Great video, it just stinks when I get into parts of these types of videos were its Pc only software. Is there any hope for Mac users? I feel like I can never find one.
The presets button does not appear for me any solution?
For EQ? You need save your EQ and it should show up after that
A fan of your content and I hope my content helps you as well. BTW, what headphones are you using? they look so comfy.....
Thank you! I use the beyerdynamic dt770's
do the settings save to the device you are using with wave link? i have my mic connected to wave xlr and configured. but i then connect my wave xlr to my ps5 and i have no idea if the settings carry over
Ok that's an excellent question. Here's what I know. The settings do save to the XLR but I don't know if it carries over to a console. In theory it should. Easy way to test this is to use the noise removal plug in. If it's on and working when connected to PC, then connect to ps5 and you hear all your noise etc then it doesn't transfer. I can test this when I get home.
@@StreamGearTalk thanks for your response, that would be great! i will try it out too later. check all over for any advice on this but i have not come across anything that helps.
One device I think should do this is the rode podmic USB. When used via USB you can save all processing to the mic. Now, what I have seen though is that the saved settings don't always work as well on console. There's something odd about how the PS5 communicates with a dsp device.
@@StreamGearTalk funny enough, the mic im using is the maono pd400x which also saves settings via usb but i find it very quiet on the ps5 and when i turn it up theres a lot of background noise. the software is nice but im not sure how well the noise gate/compressor work as when i test it on pc my voice is cut off. i could figure it out by playing around but the wave link works better and is easier to use. the settings do save on the wave xlr, but i just need to figure out if the plugins also save and carry over to another device.
First Comment 🏆
07/08/2024
🫡💯🗣🔥
What's up GNR! Good to see the consistency and you uploading good content still.
Keep up the good work!
Thanks GG. How are you doing pal ?
👍
i have wasted like 3 hrs trying to get my audio to sound right...i just keep hearing low static in my recording..I just cant figure it our..i have tried like 8 other elgato plugs vt and still the same...the static wont go way or I get an empty room sound. so fustrated waster 3 hours on this.
Need more info. What mic? Connection set up etc.