Fifine Ampligame SC3 Mixer Review

Поделиться
HTML-код
  • Опубликовано: 26 дек 2024

Комментарии • 32

  • @Aleksander-1k
    @Aleksander-1k 8 месяцев назад

    Do i need a xlr mic?
    Or can i just use an already existing mic i have and a headset?

  • @TheRandallArgo
    @TheRandallArgo Год назад +1

    Awesome review man! I just received mine in the mail today and trying to get it setup and figure it out. Would it be possible to use this with my fifine XLR mic to shoot videos on my phone for social media videos?

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      Thank you for your question. What kind of phone are you using?

    • @luizinhovianna5192
      @luizinhovianna5192 Год назад

      Da pra usar no xialme note 12?

  • @ModestReaction
    @ModestReaction Год назад +1

    Great review man. Can I output directly to my camera 3.5mm? So I don't need to deal with audio sync in post?

    • @CreatorsTEK
      @CreatorsTEK  Год назад +1

      I haven’t tested it myself however, in theory you should be able to use a 3.5mm cable from the audio “LINE OUT” of the mixer to the “MIC INPUT” of your camera.
      I recommend you adjust your camera’s mic input settings (to manual) so that the audio sounds good. Sometimes when it’s set to automatic, it will clip your levels.
      Thank you for watching!

  • @LowlifeLofi
    @LowlifeLofi Год назад +2

    How did you manage to get fifine to send it out to you?

    • @CreatorsTEK
      @CreatorsTEK  Год назад +2

      Thank you for your question. I wish it was as simple as saying you write them an email but there’s more to it than that. Depending on your sponsor, you will most likely need to build up your credibility through work or a portfolio so that they see a certain level of professionalism in your productions. I will probably make a video on this topic in the future. Thank you.

  • @AlejandroRojascontacto
    @AlejandroRojascontacto Год назад

    conecte el celular en LINE IN para musica de fondo y se escucha entrecortado mal por que sucede eso?

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      No se en tu caso especifico porque esta pasando, pero tambien e tenido experiencias en cuales me pasa algo parecido con mi equipo de sonido. En el caso mio, cuando me pasa esto casi siempre es un cable de audio que ya no sirve como deberia. Mi recomendacion seria re-emplasar el cable para ver si esto es el problema, gracias!

  • @Untoldzero
    @Untoldzero Год назад +1

    just to know, the effects and the autotune get monitoring in real time too?
    ty

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      The monitoring is in real time. Thank you!

  • @Heyyy_Jude
    @Heyyy_Jude Год назад +2

    Could this be used for a two pc setup?

    • @CreatorsTEK
      @CreatorsTEK  Год назад +1

      Hello, thank you for your question. Exactly what do you have in mind regarding your question? The mixer having two audio outputs towards two separate pc’s?
      If this is the case, (in theory) you could have one pc connected via USB and the second pc capture the audio from the speaker ‘line out’ of this mixer. I would have to test it myself to confirm this is possible. Great question

    • @Heyyy_Jude
      @Heyyy_Jude Год назад

      @@CreatorsTEK Thanks! That's exactly what I was thinking. Might be a solid idea.

    • @Anebuis
      @Anebuis Год назад

      Yes, you are able with line-in and the line-out. That is what they are MAINLY used for. i.e you could use them for like a phone or ipad with 3.5mm for music so you can control it and essentially audio split.

  • @carlxs44
    @carlxs44 Год назад +1

    hi, i bought this mixer, and trying to record something on customes buttons but not work, someone know why not heard my voice on a call or testing my own mic? aprecciate that

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      I haven’t needed to troubleshoot this mixer, in my experience everything has worked well. I will try to help, what is your current setup like with this mixer?
      Thank you.

    • @carlxs44
      @carlxs44 Год назад

      @@CreatorsTEK i have a mars gaming mic, the problem that i have its that im trying to record a voice y the customs buttoms but when i press after record, i didnt hear nothing i dont know why

  • @VQCV-xv2ud
    @VQCV-xv2ud Год назад +1

    i hear some noise!!
    is it from the mic or the mixer?!

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      The noise you hear comes from both the mic and the mixer. (My pc fans are on and at about 3 ft away from the mic) I will say that the noise floor is very low compared to other setups at this price range. Thank you.

  • @Xmatador20
    @Xmatador20 Год назад +1

    question with this mixer , can you do select one of the faders for like voice chat (discord) ?? music ??

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      According to my experience, you can connect a separate device (such as a smartphone) via 3.5mm audio input on this mixer and listen in on the audio from that. This works with any audio playing from the smartphone (music or other). I haven’t been able to get two way communication to work back to the smartphone through this mixer. I will be running more tests in the near future just in case it’s just a compatibility issue with the cables I’ve been using so far.
      In short, I can confirm you can turn volume up or down via the extra 3.5mm audio input. But I cannot confirm if two way communication is available. Thank you.

    • @Daddyezee
      @Daddyezee Год назад

      @@CreatorsTEK to use TWC you need to use a TRS to the TRRS with the adaptor if your using a iphone or new android devices this will let you use the audio interface to record using your mic for more Pro videos if your using your phone for for videos or you can do the same with your camera if it supports a 3.5mm cord..

    • @Anebuis
      @Anebuis Год назад

      There is no PROPER audio splits like the GOXLR.

    • @Daddyezee
      @Daddyezee Год назад

      @@Anebuis wrong there’s a mixer called the M-Game Dual RGB which I own that you don’t need to do all that plus it connects to to computer or Mac which has all the same features as the goXLR but cheaper check out my review video on it

  • @baptizemachine6969
    @baptizemachine6969 Год назад

    can you connect this fifine sound board to a scarlet 2i2 to use two mics from the scarlet ? So the scarlett can use two mics and you can still use the fifine soundboard features? If so I'd love to know what cables I need for that and how to set this up.

    • @CreatorsTEK
      @CreatorsTEK  Год назад

      Wow, it sounds an awful lot of fun to try that. I don't have this particular sound board any more but at least in theory I don't see why it wouldn't work. With the proper cables I think it should work. If I was to try it, I would use a 3.5mm to dual 6.35mm Y stereo cable. I would use the Scarlet line outs for speakers L and R (using said cable) and plug it into the LINE IN (3.5mm jack) in the back of the SC3 mixer. I'm not 100% sure that it will work, but in theory it should. Thank you for your question, I appreciate it.

  • @gerardofaccio403
    @gerardofaccio403 Год назад

    Can I use to customice volumen levels on my game, discord or music separately

    • @CreatorsTEK
      @CreatorsTEK  Год назад +1

      Unfortunately, no, the levels you set up with this mixer are pretty much going to be the same across your outputs to your game, music, or discord. Thank you for your question.

  • @Nightwatcher5
    @Nightwatcher5 Год назад

    Can u use a usb mic instead of this mic? I have the Hyperx quad cast and kinda want this mixer 😊

    • @CreatorsTEK
      @CreatorsTEK  Год назад +1

      My apologies but would you be able to elaborate your question in a little more detail please.
      This mixer is for use with XLR connections on microphones even when they have dual USB and XLR functionality. As far as the HyperX quad cast mic goes, I am unable to test using that one as I do not have it available to me. I'm sorry if I was not able to answer your question this time but hope to be able to once its cleared up a bit more, thank you!