I was recently going through a knife forum site where several very astute collectors of traditional knives were showing many slip joints made in Sheffield during the 19th and first half of the 20th century. These knifes were in a league of their own, with craftsmanship that was quite amazing! I guess I should not be surprised as all the "formal" dining utensils I grew up with had "Sheffield" stamped on the back :)
Never stop buying local! I'd be buying more Canadian knives, if there were more Canadian brands! Speaking of which, I HIGHLY recommend you check out Grohmann's Slimline pocket knife. It's UK legal, and they offer Stag and Rosewood for the handles. They sell two blade variants with double clip blades! Also, they offer factory seconds for half-price! The flaws are very minor and are worth taking for 50% off! Anyways, Sheffield knives are lovely! I really like them! A. Wrights are my favourites! Although I quite like Rodgers!
Nice, I just found a large antique fair head by lockwood bros in an auction lot. Hand forged blade, horn handle, bronze boss. It was covered in putty but has cleaned up really well..D
What you failed to mention is that if you buy a Tailers eye witness at the same price point as the Arthur Wrights you get the same kind of fit and finish. I use a Arthur Wrights double blade barlow it cost me 30 quid, I prep rabbits, woodpigeon, and whatever else I've shot with it opened bags of cement paired sheep's hooves and even made cheese butties with it, give it a wash abit of oil a lick up on a strop and its shaving sharp again if it breaks i can buy a new one its a tool. Now im not saying you can't do that with the 180 quid taylors but would you want to ultimatly its a collectors knife not a working knife it's like comparing a Rolls Royce with a tractor they both have 4 wheels and an engine but would you drive a Roller through a muddy field?
Yes, I have the Taylors version of that rosewood sheepsfoot also in carbon steel for just £20 and the workmanship is outstanding. Don't mind a few imperfections on the A.Wrights if it doesn't effect its use, my 2 blade Barlow came as sharp as a tennis ball and a couple of machine marks on the liners, after getting the blade right it's one of my favourite knives. The Sheffield knives have character you either appreciate or not. Why would anyone carry a British Army clasp knife in this day and age? It's got character.
I think A Wright have sorted their issues out of late. I recently bought a large lambsfoot and it's great, not perfect but not as bad as the ones you describe.
They certainly have. You might have a look at some of my newer videos. I’ve bought a dozen or more over the last year from a number of sources, and the quality is about right for the (low) price they charge… i.e. good, but not always perfect. Ashley Harrison’s private work bears comparison to almost any maker.
I think they have listened to the criticism over a period of time. I had 2 made to order over 12 months ago, really nice EDC work knives, and i mean really nice. I ordered 3 more recently, they are in the mail, will be interesting to see their quality and fit and finish. I suspect they will be fine. They have been coping a fair bit of you know what over the the last few years, but if you want a collectors knife, get a custom made or get in the que for a GEC. For the price, they are great knives, all things considered they are cheap compared to some of the brands out there. Looking forward to seeing the 3 i have on the way.👍 Glad you got a good one, and like it.🤩
@Slick Slicers - I just bought an Arthur Wright two-blade Barlow in buffalo horn and yes, it's as blunt as a Blunt Blunty McBluntface. Fortunately, I was able to select mine in person from half-a-dozen examples the retailer had in stock. Fortunate because the build quality as you've observed is frankly shocking, and I've managed to come away with one which isn't that bad. It has a definite charm, and secures its place in my collection as an exemplar of the parlous state of a once-great British industry. It'll go lovely in the pocket of a nice Harris tweed jacket...
David S forewarned is forearmed! You’ve made my day.... someone has actually benefited from my ramblings! The two sheep’s foots in this are knives I carry a lot, despite their shortcomings. Enjoy it!
@@slick_slicers I got it from The Bushcraft Store, which isn't too far from where I live. They also market knives under their own branding (TBS), including a UK legal EDC which you might want to check out.
Sir ..may I ask ..how do I know if the vintage Richard Sheffield I bought for 1quid is fake...wish I could send you the picture .nice video ..love it...thank you
It is interesting to see about Sheffield knives, thanks for showing. For the beginning I ordered now an A. Wright Barlow. I want to use the chance before the Brexit, when order from the UK will become maybe more expensive for me because of import tax.
SimpliciusTeutsch good move. However, there’s a lot of arithmetic in quality with Wright knives. The only constant is that they’re always blunt! On the plus side, they’re easy to sharpen.
@@slick_slicers Yesterday I received the Barlow, my first knife from Sheffield, and I like it. Regarding the quality it is properly done. The back spring is very strong. First I wondered a little bit about the back line from the handle to the blade is not 180°. But that's also the case on every product photo on the internet that I've seen, so I think it is a characteristic of this knife and it has to be like that. And yes it is quite blunt, but as you said, that's no big issue.
SimpliciusTeutsch I take it you got an Arthur Wright. I’ve three of their knives and they’re pretty mixed, but none is perfect. It’s a shame because they can do it if they want to. It is a poor show that they can’t sharpen them, but at least that can be sorted.
Thanks for showing us your Sheffield collection. 👍 I really like Arthur Wright's designs, they are beautifully proportioned knives - with huge quality control issues. A real shame.
@@slick_slicers Do you have an opinion on the quality of their steel? I hear others complaining that they just won't hold an edge. That Senator is a real looker! Thanks.👍
Ivancho yes, unfortunately they use C70, which may be traditional, but I’d prefer even 420! I don’t like patina, I like shiny! I know it should matter more, but I’ve so many knives, I don’t worry about any one going blunt.
They are called covers on traditional knives. I own a two bladed barlow from Arthur Wright I paid £24 it came blunt I just sharpen it as for the fit and finish what do you expect for the price.
desertfox xx98 yes I’ve a few Arthur Wright’s, they all came blunt! The Taylor’s ones cost £130 and £205 and are as near perfect as I’ve ever seen. I have two more now, a Barlow in buffalo horn and a jack knife in Amboynia burl. I’ve also added a couple of Michael May Sheffield knives. They’re a big step up from Wright knives, but short of the TEW. They came in at £65 & £70. There’s videos on all of them on my channel.
Not very many. The likes of Michael May and Steven Cocker are one man (possibly 2) bands. Chan Shing is from Sheffield, but working in Lancashire. Arthur Wright (Michael & Ashley Harrison) are only marginally larger, and the pocketknife department at Taylor’s Eye Witness has only just grown to three folk. They are a volume producer of Sheffield made kitchen knives. That really only leaves Ibberson (Joseph Roger’s & Woostenholm), but I know less about them. There are some custom kitchen knives and at least one scissors maker still going too.
Wow that mother of pearl is something else. So beautiful that I wouldn't want to use the knife. Just carry it like jewellery. How many knives do you own? Over the years I have fallen in love with slipjoints, not just because of their legality in the Uk but I have a respect for those that make them as they are a real art to get right. The back spring can certainly be tricky. There was a Chinese maker but for the life of me I can't remember his name. His knives were pretty sought after, a real maker, nothing mass produced.... He made very simple but well executed slipjoints in the UK I believe, do you know by any chance who I mean?
Unstoppable Tramp the mother of Pearl is simply superb, but at £205 it ought to be! I love it, but tend to only carry it on special occasions. The rams horn one gets some decent pocket time though. I’ve not a huge collection, but I’ve 34 UK legal slip-joints, including 10 Swiss Army knives. They’ll all be on here shortly. The videos aren’t great, but I thought I’d share what I’ve got with anyone who’s interested in UK legal knives. Often they are overlooked by US RUclipsrs. I’ve also a dozen or so non-uk friendly folders, some fixed blades, swords and double edged razors... anything sharp basically! The Chinese maker escapes me, I’m afraid. I do like handmade knives, clearly.
@@slick_slicers Well be sure to add the right tags to your videos because it is hard to find good reviews on blades by people that actually know what they are talking about!! Then with channel growth you will be receiving freebies in the mail hopefully! Oh and I just remembered the blade makers name. Shing!! Check these out shingcrafts.weebly.com/folding-knives.html Beautiful simplicity and they get great reviews apparently. I want one!
@@slick_slicers When you upload a video on a PC you will see a box saying TAGS and there you can select key words that will draw people to your videos. Always add your channel name as one too and then more of your videos will appear on the right hand side, suggested videos. Easier for people to watch more too!
They are lovely(Taylors Eye)but isn't it a pity they don't have some 1095 models. I see some of the fancy German knives which can be pricey often have 440 steel too. 440C is decent, I have one Spanish knife in that but I always heard if a manufacturer uses 440C they will shout it from the rooftops as it is more expensive. If they say 440 steel it is 440A. I was trying to look up Taylors eye to price etc but I'm not finding them
vinniesdayoff try this link. Stock is always low, I’m afraid, but make sure you’re sitting down before you look; their prices are something else! Mind you, I’ve never tried their cheaper models. bakewellcookshop.com/cutting-and-chopping/pocket-knives.html?dir=desc&order=price
Michael May, a Sheffield Maker, does carbon steel, and he makes some lovely working knives. Only problem is that his knives can have workmanship issues occasionally. Mine are both perfect! ruclips.net/video/fubmo1vkKSY/видео.html
Mr May is a bit more expensive than A Wright, but then again he has good steels and handmade work. I'm pondering now. Our internet is hit and miss tonight.
I dunno if you're togar from the mic or what but it's kinda like you're mumbling. Especially in the start. Might just be me but thought I'd mention it. Beautiful knives. Too bad we only get sheffields mass produced stuff in america
I love the brass clips on the back of the blade, do you have to special order those or do you add them yourself? Ihave only seen those knives with an ordinary nail nick
katerinski7 thank you, I have them out of necessity, rather than want really. They are very stiff openers and my right arm is quite badly paralysed. My left is better, but I’ve limited grip strength. They are American in origin and sell under the name Kwik-Bar. They also do `Kwik Studs. They’re really for the Buck 110, so accommodate 3mm blades quite easily and are he’d on by 2 tiny grub screws. Heinnie Haynes carries the studs in the UK, but I got all of mine from thebushcraftstore.co.uk They’re not cheap, but they solved a problem. I’m trying to find a local engineer to make me some that would be a better fit for these thin, less than 2mm blades as there’s quite a gap with these. So far, I’m struggling, but I’ll be sure to post a video if I ever succeed.
Gorgeous George jail studs are round and available in brass, satin steel or black steel. Kwik bars are, well, bars! They’re only in brass, but there are small (these ones) or large (about half as long again). They are all designed to fit the Buck 110, so the blade slots are too big really. One day I’ll find someone to make some in the UK. It’s too small a job really, but I’m sure I’ll do it eventually.
Who would you regard as the best British knife maker? And do you know how many knives makers their are in the U.K.? I know of Arthur Wright, Joseph Rodgers and Taylor’s eye witness. Is there anymore? (I’m not talking about custom makers as I can afford any of their stuff right now.)
I may be in the minority here but I like it when handmade things have some imperfections to them (regarding said imperfections don't impede the functionality of the item). They're like birthmarks, almost, which you simply don't get with something machine-made. That being said, the tail end of that pruner is heinously squiffy.
ADHDistracted a point I make repeatedly! I like to see the fingerprints of the maker on the item! But, yes, there are limits and that pruner pushes the bounds! I recently got another Senator (double bolster) and it’s pretty close to perfect. They can get it right!
@@slick_slicers I just got an A. Wright Sheepsfoot off Heinnie (it arrived just this morning, in fact). I also saw that it was gone from the site once my order had processed with a 'this isn't being restocked' notice, so I think I may have gotten the last one. It looks pretty much perfect apart from a couple of spots where the brass doesn't quite meet the wood. It's also completely devoid of an edge bevel of any kind, so I'm spending lots of time and patience with a sharpener slowly getting it to be sharp, which is easier said than done with even a lesser carbon steel like C70.
I hope you sent it back. I’ve about 45 of his knives and no total duffers. There is one that’s not great, but it’s a very early one and I bought it at a price that reflected that.
I was recently going through a knife forum site where several very astute collectors of traditional knives were showing many slip joints made in Sheffield during the 19th and first half of the 20th century. These knifes were in a league of their own, with craftsmanship that was quite amazing! I guess I should not be surprised as all the "formal" dining utensils I grew up with had "Sheffield" stamped on the back :)
So good to see ! I thought it was already too late to find hand made, quality knives from Sheffield.
Never stop buying local! I'd be buying more Canadian knives, if there were more Canadian brands! Speaking of which, I HIGHLY recommend you check out Grohmann's Slimline pocket knife. It's UK legal, and they offer Stag and Rosewood for the handles. They sell two blade variants with double clip blades! Also, they offer factory seconds for half-price! The flaws are very minor and are worth taking for 50% off! Anyways, Sheffield knives are lovely! I really like them! A. Wrights are my favourites! Although I quite like Rodgers!
I’ve always wondered what traditional Canadian knives there were.
Nice, I just found a large antique fair head by lockwood bros in an auction lot. Hand forged blade, horn handle, bronze boss. It was covered in putty but has cleaned up really well..D
What a good find! I’m never that lucky!
What you failed to mention is that if you buy a Tailers eye witness at the same price point as the Arthur Wrights you get the same kind of fit and finish. I use a Arthur Wrights double blade barlow it cost me 30 quid, I prep rabbits, woodpigeon, and whatever else I've shot with it opened bags of cement paired sheep's hooves and even made cheese butties with it, give it a wash abit of oil a lick up on a strop and its shaving sharp again if it breaks i can buy a new one its a tool. Now im not saying you can't do that with the 180 quid taylors but would you want to ultimatly its a collectors knife not a working knife it's like comparing a Rolls Royce with a tractor they both have 4 wheels and an engine but would you drive a Roller through a muddy field?
Yes, I have the Taylors version of that rosewood sheepsfoot also in carbon steel for just £20 and the workmanship is outstanding. Don't mind a few imperfections on the A.Wrights if it doesn't effect its use, my 2 blade Barlow came as sharp as a tennis ball and a couple of machine marks on the liners, after getting the blade right it's one of my favourite knives. The Sheffield knives have character you either appreciate or not. Why would anyone carry a British Army clasp knife in this day and age? It's got character.
I think A Wright have sorted their issues out of late. I recently bought a large lambsfoot and it's great, not perfect but not as bad as the ones you describe.
They certainly have. You might have a look at some of my newer videos. I’ve bought a dozen or more over the last year from a number of sources, and the quality is about right for the (low) price they charge… i.e. good, but not always perfect. Ashley Harrison’s private work bears comparison to almost any maker.
I think they have listened to the criticism over a period of time. I had 2 made to order over 12 months ago, really nice EDC work knives, and i mean really nice. I ordered 3 more recently, they are in the mail, will be interesting to see their quality and fit and finish. I suspect they will be fine. They have been coping a fair bit of you know what over the the last few years, but if you want a collectors knife, get a custom made or get in the que for a GEC. For the price, they are great knives, all things considered they are cheap compared to some of the brands out there. Looking forward to seeing the 3 i have on the way.👍 Glad you got a good one, and like it.🤩
You have exquisite taste in pocket knives! I enjoy your vids very much!
Wow, that’s an old video!
Almost fell asleep while watching
@Slick Slicers - I just bought an Arthur Wright two-blade Barlow in buffalo horn and yes, it's as blunt as a Blunt Blunty McBluntface. Fortunately, I was able to select mine in person from half-a-dozen examples the retailer had in stock. Fortunate because the build quality as you've observed is frankly shocking, and I've managed to come away with one which isn't that bad. It has a definite charm, and secures its place in my collection as an exemplar of the parlous state of a once-great British industry. It'll go lovely in the pocket of a nice Harris tweed jacket...
David S forewarned is forearmed! You’ve made my day.... someone has actually benefited from my ramblings! The two sheep’s foots in this are knives I carry a lot, despite their shortcomings. Enjoy it!
I forgot to ask, where did ŷou buy it from? I’ve always bought mine mail-order. I’d like to be able to choose my own example rather than take potluck!
@@slick_slicers I got it from The Bushcraft Store, which isn't too far from where I live. They also market knives under their own branding (TBS), including a UK legal EDC which you might want to check out.
David S I’ve bought from them, but just mail order. Thanks.
Sir ..may I ask ..how do I know if the vintage Richard Sheffield I bought for 1quid is fake...wish I could send you the picture .nice video ..love it...thank you
Taylor’s Eye Witness also make a £30 knife range, are these better than Wrights would you say?
Have not yet been able to find anyone selling them in America
I know BakewellCookshop.com ship to the US and I think The Famous Sheffield Shop do too, though both are in England.
It is interesting to see about Sheffield knives, thanks for showing. For the beginning I ordered now an A. Wright Barlow. I want to use the chance before the Brexit, when order from the UK will become maybe more expensive for me because of import tax.
SimpliciusTeutsch good move. However, there’s a lot of arithmetic in quality with Wright knives. The only constant is that they’re always blunt! On the plus side, they’re easy to sharpen.
@@slick_slicers Yesterday I received the Barlow, my first knife from Sheffield, and I like it. Regarding the quality it is properly done. The back spring is very strong. First I wondered a little bit about the back line from the handle to the blade is not 180°. But that's also the case on every product photo on the internet that I've seen, so I think it is a characteristic of this knife and it has to be like that. And yes it is quite blunt, but as you said, that's no big issue.
SimpliciusTeutsch I take it you got an Arthur Wright. I’ve three of their knives and they’re pretty mixed, but none is perfect. It’s a shame because they can do it if they want to. It is a poor show that they can’t sharpen them, but at least that can be sorted.
Thanks for showing us your Sheffield collection. 👍
I really like Arthur Wright's designs, they are beautifully proportioned knives - with huge quality control issues. A real shame.
Ivancho I recently got another Senator and a Lambsfoot that are pretty close to perfect. They can do it!
@@slick_slicers Do you have an opinion on the quality of their steel? I hear others complaining that they just won't hold an edge.
That Senator is a real looker!
Thanks.👍
Ivancho yes, unfortunately they use C70, which may be traditional, but I’d prefer even 420! I don’t like patina, I like shiny! I know it should matter more, but I’ve so many knives, I don’t worry about any one going blunt.
@@slick_slicers 😁
Amazing steel
I do like Sheffield knives!
@@slick_slicers yep sheffield steel and the sheffield shield
They are called covers on traditional knives.
I own a two bladed barlow from Arthur Wright I paid £24 it came blunt I just sharpen it as for the fit and finish what do you expect for the price.
desertfox xx98 yes I’ve a few Arthur Wright’s, they all came blunt! The Taylor’s ones cost £130 and £205 and are as near perfect as I’ve ever seen. I have two more now, a Barlow in buffalo horn and a jack knife in Amboynia burl. I’ve also added a couple of Michael May Sheffield knives. They’re a big step up from Wright knives, but short of the TEW. They came in at £65 & £70. There’s videos on all of them on my channel.
How many Sheffield companies are left making knives?
Not very many. The likes of Michael May and Steven Cocker are one man (possibly 2) bands. Chan Shing is from Sheffield, but working in Lancashire. Arthur Wright (Michael & Ashley Harrison) are only marginally larger, and the pocketknife department at Taylor’s Eye Witness has only just grown to three folk. They are a volume producer of Sheffield made kitchen knives. That really only leaves Ibberson (Joseph Roger’s & Woostenholm), but I know less about them. There are some custom kitchen knives and at least one scissors maker still going too.
Wow that mother of pearl is something else. So beautiful that I wouldn't want to use the knife. Just carry it like jewellery.
How many knives do you own? Over the years I have fallen in love with slipjoints, not just because of their legality in the Uk but I have a respect for those that make them as they are a real art to get right. The back spring can certainly be tricky.
There was a Chinese maker but for the life of me I can't remember his name. His knives were pretty sought after, a real maker, nothing mass produced.... He made very simple but well executed slipjoints in the UK I believe, do you know by any chance who I mean?
Unstoppable Tramp the mother of Pearl is simply superb, but at £205 it ought to be! I love it, but tend to only carry it on special occasions. The rams horn one gets some decent pocket time though.
I’ve not a huge collection, but I’ve 34 UK legal slip-joints, including 10 Swiss Army knives. They’ll all be on here shortly. The videos aren’t great, but I thought I’d share what I’ve got with anyone who’s interested in UK legal knives. Often they are overlooked by US RUclipsrs. I’ve also a dozen or so non-uk friendly folders, some fixed blades, swords and double edged razors... anything sharp basically!
The Chinese maker escapes me, I’m afraid. I do like handmade knives, clearly.
@@slick_slicers Well be sure to add the right tags to your videos because it is hard to find good reviews on blades by people that actually know what they are talking about!! Then with channel growth you will be receiving freebies in the mail hopefully!
Oh and I just remembered the blade makers name. Shing!!
Check these out shingcrafts.weebly.com/folding-knives.html
Beautiful simplicity and they get great reviews apparently. I want one!
I’ve no idea how to add ‘tags’!
@@slick_slicers When you upload a video on a PC you will see a box saying TAGS and there you can select key words that will draw people to your videos.
Always add your channel name as one too and then more of your videos will appear on the right hand side, suggested videos. Easier for people to watch more too!
Ah, that explains it, I uploaded everything on a mobile phone. There must still be a way though?
They are lovely(Taylors Eye)but isn't it a pity they don't have some 1095 models. I see some of the fancy German knives which can be pricey often have 440 steel too. 440C is decent, I have one Spanish knife in that but I always heard if a manufacturer uses 440C they will shout it from the rooftops as it is more expensive. If they say 440 steel it is 440A. I was trying to look up Taylors eye to price etc but I'm not finding them
vinniesdayoff try this link. Stock is always low, I’m afraid, but make sure you’re sitting down before you look; their prices are something else! Mind you, I’ve never tried their cheaper models. bakewellcookshop.com/cutting-and-chopping/pocket-knives.html?dir=desc&order=price
Michael May, a Sheffield Maker, does carbon steel, and he makes some lovely working knives. Only problem is that his knives can have workmanship issues occasionally. Mine are both perfect! ruclips.net/video/fubmo1vkKSY/видео.html
@@slick_slicers I could care less about fit and finish etc. All I want is a strong spring, comfy handle and a decent blade
Mr May is a bit more expensive than A Wright, but then again he has good steels and handmade work. I'm pondering now. Our internet is hit and miss tonight.
I dunno if you're togar from the mic or what but it's kinda like you're mumbling. Especially in the start. Might just be me but thought I'd mention it. Beautiful knives. Too bad we only get sheffields mass produced stuff in america
I love the brass clips on the back of the blade, do you have to special order those or do you add them yourself? Ihave only seen those knives with an ordinary nail nick
katerinski7 thank you, I have them out of necessity, rather than want really. They are very stiff openers and my right arm is quite badly paralysed. My left is better, but I’ve limited grip strength. They are American in origin and sell under the name Kwik-Bar. They also do `Kwik Studs. They’re really for the Buck 110, so accommodate 3mm blades quite easily and are he’d on by 2 tiny grub screws. Heinnie Haynes carries the studs in the UK, but I got all of mine from thebushcraftstore.co.uk They’re not cheap, but they solved a problem. I’m trying to find a local engineer to make me some that would be a better fit for these thin, less than 2mm blades as there’s quite a gap with these. So far, I’m struggling, but I’ll be sure to post a video if I ever succeed.
@@slick_slicers Thank you so much, really helpful
Gorgeous George jail studs are round and available in brass, satin steel or black steel. Kwik bars are, well, bars! They’re only in brass, but there are small (these ones) or large (about half as long again). They are all designed to fit the Buck 110, so the blade slots are too big really. One day I’ll find someone to make some in the UK. It’s too small a job really, but I’m sure I’ll do it eventually.
Gorgeous George they look like it, but the one with 2 bolsters was anything but cheap - 60 Quid!
Gorgeous George I’ve 50+ slipjoints, but after that I’ve everything from safety razors to double handed swords!
Where can one purchase Taylor's Eye Witness knives?
pmwheatley that’s certainly the tricky part! HH used to carry them, but now you just need to hunt around and see what comes up. TEW have a website.
Where can I get those brass stud things for the nail Nick ? I want one to put into CNC and make a bigger one for my benchmade proper
NS JP LIFE I bought them from The Bushcraft Store on line. I suspect they’d fit a Proper as they’re originally designed to fit the Buck 110.
Who would you regard as the best British knife maker?
And do you know how many knives makers their are in the U.K.?
I know of Arthur Wright, Joseph Rodgers and Taylor’s eye witness.
Is there anymore?
(I’m not talking about custom makers as I can afford any of their stuff right now.)
My dad had one so he gave it too me and I have a flip one
edit: thx for the heart
I may be in the minority here but I like it when handmade things have some imperfections to them (regarding said imperfections don't impede the functionality of the item). They're like birthmarks, almost, which you simply don't get with something machine-made. That being said, the tail end of that pruner is heinously squiffy.
ADHDistracted a point I make repeatedly! I like to see the fingerprints of the maker on the item! But, yes, there are limits and that pruner pushes the bounds! I recently got another Senator (double bolster) and it’s pretty close to perfect. They can get it right!
@@slick_slicers I just got an A. Wright Sheepsfoot off Heinnie (it arrived just this morning, in fact). I also saw that it was gone from the site once my order had processed with a 'this isn't being restocked' notice, so I think I may have gotten the last one. It looks pretty much perfect apart from a couple of spots where the brass doesn't quite meet the wood. It's also completely devoid of an edge bevel of any kind, so I'm spending lots of time and patience with a sharpener slowly getting it to be sharp, which is easier said than done with even a lesser carbon steel like C70.
Believe on the name of Jesus Christ and be saved from hell before it’s too late
I bought a knife signed by lee white and the quality of the knife rhymes with his surname.
I hope you sent it back. I’ve about 45 of his knives and no total duffers. There is one that’s not great, but it’s a very early one and I bought it at a price that reflected that.