Knife making - Hand made pocket knife
HTML-код
- Опубликовано: 11 июн 2024
- This my my 23th hand made pocket knife. I finally got my new bench grinder. about 3HP. I really enjoy it and am looking forward to getting descent at free hand grinding! Furthermore, I made a lapping tool, so I can now make bushings. In the past I have sometimes peened the liners so tight that the action of the blade when going from locked to open was compromised. Now the walk and talk are getting better!
inmyshed.godaddysites.com
1. Checkering File - amzn.to/3Sn8i4Q
2. Files I like - amzn.to/3YCbo6D and amzn.to/3ZxZko4
3. Tetra Gun Liquid Blue - amzn.to/3xH2zgR
4. 123 Blocks I use - amzn.to/3UgktkM
5. Hardness tester file set - amzn.to/3mg3q5T
These are amazon affiliate links.
FULL DISCLOSURE
I earn from qualifying purchases.
Heat treating
I have never heat treated Elmax before. I got the data from looking at manufacturing sheets, youtube and varies blade forum post.
The blade
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 20m
C. Plate quenched about 2m
D. Put in regular freezer for 60m
E. Tempered at 437F / 225C 2x2 H. Air cooled in between
The spring
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 20m
C. Plate quenched about 2m
D. Air cooled to room temperature.
E. Tempered at 1099,4F / 593C for 1H
Liners
A. Preheated at 1472F / 800c for 15m
B. Held at 1940F / 1060c for 25m
C. Plate quenched about 2m
D. Air cooled to room temperature.
E. Tempered at 437F / 225C 2H
6. Air cooled to room temperature
7. Tempered at 572F / 300C 2H
0:00 Making the blade
1:15 Checkering/Jimping
1:36 Making the back spring
2:56 Making the liners
3:19 Hardening the back spring
4:14 Making "2 point contact" on blade
4:34 Testing the spring
4:41 Shaping liners
5:13 Making holes for scales and bolsters
5:44 Making a pivot bushing
6:59 Hardening the blade
7:29 HRC testing files
8:04 Making bolsters
9:06 Making scales
11:00 Getting there
12:03 Final touch 
Хобби
A work of art and obviously a labour of love. I'm very impressed.
Bravo !
Thanks!
Yeah you good 😊
Thank you!😃
Like the toy!
Finest folder making I’ve seen!
Thank you!
I love everything about this knife. Bravo. Wishing I had one myself👍🏻
Hi! Thank you! I gave that one to my brother, hehe!
Very impressive, especially considering the amount of hand tools and work involved, versus machinery.
Respect.
Thank you!
Lovely, I want, I want!
Thank you!
Wonderfull job! Thanks a lot for share
Даааааааа, мастерство зашкаливает. Перфекционизм на грани, если не за гранью. Понравилось, что своё клеймо так спрятал ))) Скромняга ))) 👍💪🤘✊🤝👌✌️👋👋👋👋👋
@@carhard_oldmachine2743 вот только клеймо возле поворотной оси и его не сразу видно
Gorgeous knife. I need it in my life!
Thank you! haha
Nice job.After finishing it will look more enticing.
Nice job 👏👏
Beautiful pocket knife
Thanks!
Handsome knife.
Thank you!
A nice knife for every day use , great job 😁😁🤘🤘
Thanks Karl! :D
Beautiful work. Very nice.
Thanks!
Hurray! The previos belt grinder not quiete fits to the knifemaking craf, but the new one does. Keep on creating, the progress is awesome!
Beautiful knife well done
Agreed! Its a dream to use the new one! Thank you, I sure will!
Thanks!
Thank you
That was worth watching. Liked. Subscribed
Hi! Thanks man!
Прикольно, чесно кажучи перший раз таке бачу. Дякую, успіхів і перемога буде за нами.
Привет! гугл-переводчик плохо переводит то, что вы написали, извините.
Excelente herramienta 🎉
¡Gracias!
good on you mate.....tool up or die.....looking forward to more of your work......
Thank you so much! I hope to get a new video out by Friday. Its not a folder though! hehe
super dooperr cool
Thank you!
nice!!!!
Эстетично🤝. Стильная вещь!
Спасибо!
Very Cool! 💯👍
Thanks!
Very nice
thanks!
beutiful pocket knife
Thank you!
I want to make one like this for myself. It’s be made if O1, with copper fittings, a pocket clip, and some nice ironwood. O1 patinas in such a pretty way that it would compliment the copper and wood nicely
Hi! I did save the pattern for this one. Do you make knives? Sounds like a nice build!
@@Inmyshed
I want to get into it, I don’t have any space for it but I think I have a solution for it
@edanpino-xt1ph I hope you get starting! It does not need to be a big operation!
@@Inmyshed
I know it doesn’t, I just need to get the materials and some files
Chapeau
Самое сложное расклепать латунь на деревяхе,, я в восторге, всё безупречно,, классика,
Огромное спасибо! Я рад, что вам понравилось!
Top
Awesome knife. I want to make a folder some day...
Thanks! You should! its not that hard!
@@Inmyshed You're welcome! Hard part for me right now is time. It will get better soon.
😍👏👏👏👏👏
These are gorgeous. I’ve watched 2 videos and no doubt it’s the same maker. Can these knives be bought. Is there somewhere to go to buy these knives….
Hi! Thank you! Not yet, but I am looking into getting a web page going and start selling some.
Beautiful craftsmanship!
What is the purpose of wrapping the stuff in sheet metal before heat treat? Does that prevent scale or something?
Hi! thanks! It reduces decarburization. I have not tested not using it, and on the forums I read they recommend it.
Un trabajo muy bueno , una consulta como se llama la lima que hace ranuras en linea 1 munuto , veinte segundos, la usas , gracias.
¡Gracias! Se llama archivo de verificación / archivo jimping.
You did a great work 🎉do you sell these?
Hi! Thank you! I am making 15 folders right now, and they will be finished in a weeks time. I will post then to my website.
👍🙂👍
Top job, really nice knife. Only one question, where’s the nail nick for opening?
Hi! The blade shape makes a nail nick redundant. Its so easy to open. I was pondering making one just for esthetics tho. maybe on the next one!
Where is mine it’s beautiful
Hehe, thanks!
1:18 what kind of file is that? where can you buy one?
Hi! Check out description.
Hello, what kind of file are you using for the grooves?
Knurling file.
Hi! Its a checkering/jimping file. I have a link in description for it.
@@TheGunf1ghter Thank you.
Won't the blade dull when closing?
Hi! no. The edge never touches the back spring when locked due to the kicker. Watch from 4:39 and u can see the clearing when closed.
замечательно👍🏻какая цена?
Привет! Не продается. Но скоро я буду продавать ножи. Как вы думаете, какова справедливая цена?
What price in Pakistan
I do not sell knives yet
Good Day...
What's country do You live ???
Good day! I live in Norway
@@Inmyshed Sank's , Mr ...
Maybe , you'll write me your's e ~ mail post adress...???
It's very nice knife work...
это бритва ? ручка тяжелая-не удобно будет.
Это не бритва, и ручка чувствует себя нормально. :)
@@Inmyshed не бритва ? а что -стаместка ? странная у вас стаместка!
That's freaking awesome work man 👌 would have been rude not to sub 😉
Hi! Thank you so much!
Stabbing is sweet
Will be hard to do with a knife like this😂
Looks more like razor for serial killer.
to be honest, I like this blade shape cuz it is not so threatening. Big pointy knives scares the average joe.