By the way, I did this air test with the Deep HC because that’s the program I used during the 18 and 20 inch depth tests. But I’ll try with Goldfield and Relic as well..
Sorry, but you should have used PRG1 from DEUS I /II with the default settings. Relic from DEUS I and Deep HC from DEUS II are completely different programs. How high was the reactivitiy set on the DEUS I?
@@AllMetalDetecting By the way, a very good choice, the 50 cent euro coin. This coin is very much in circulation. The test can be repeated at any time by anyone 👍
@@lorenzolombardi3450 si, attivi il pinpoint ed entri quindi in modalità no motion. A me non piace il pinpoint e per localizzare il target uso le estremità delle piastre. Comunque è la modalità pinpoint che va in no motion..
Compare Deep HC with Gold and Relic modes in an air test. You might be surprised which is deeper on the Deus 2.
Ok I’ll try. Give me times for testing...👍
By the way, I did this air test with the Deep HC because that’s the program I used during the 18 and 20 inch depth tests. But I’ll try with Goldfield and Relic as well..
Sorry, but you should have used PRG1 from DEUS I /II with the default settings. Relic from DEUS I and Deep HC from DEUS II are completely different programs.
How high was the reactivitiy set on the DEUS I?
2. The same on D2
@@AllMetalDetecting In the video (Scene 0:23), however, the reactivity of the DEUS II was set to 0.
@@petera.7755 You’re right. I’ll try again with reactivity 0..
@@AllMetalDetecting By the way, a very good choice, the 50 cent euro coin. This coin is very much in circulation. The test can be repeated at any time by anyone 👍
What coil size did you use on the DEUS1 and DEUS2?
11 inch both detectors
@@AllMetalDetecting perfekt
Ma il Deus 2 ha la modalità no motion?
La modalità no motion la attivi in pinpoint
@@AllMetalDetecting quindi come su Deus uno?
@@lorenzolombardi3450 si, attivi il pinpoint ed entri quindi in modalità no motion. A me non piace il pinpoint e per localizzare il target uso le estremità delle piastre. Comunque è la modalità pinpoint che va in no motion..
@@AllMetalDetecting si l ho usata qualche volta.... Guadagna molto in profondità ma e un po' complessa da gestire...
You must learn to mark a good video
You need to set tx boost to 3
In Deep program TX Power is on 3 by default..
Tx power does not affect depth
It does