Very good video showing basic process of pipeline construction. There are several additional crews and steps required for completion, but nonetheless a great video for those who are curious about how pipelines are built. I usually work on tie-ins, bores or access crews on big inch union pipeline jobs in Western Canada, it’s a great way to make a living, being outdoors all day, seeing what we have accomplished in a day is very gratifying and the money can’t be beat. We are away from home for months at a time, but usually after a project ends we get time off at home before the next project starts. Love pipelining and would not do anything else.
@@PotentialGaming hang in there, work hard, stay safe and take care of your coworkers. The CGL project is a great opportunity for us, I’m on it as well and currently in Parsnip camp working on spread 3. Tip: stay away from the druggies and partiers, there will be plenty of time for that when the project is completed, it’s just not worth it.
@@doesntmatter5704 thanks man and I agree 100% im always asking questions and getting the affirmative before doing anything that is remotely close to hazardous, i understand how dangerous this job is especially on the environment im at. better safe then sorry im at spread 2 with surerus murphy mt merrick lodge is that for sa energy? wanna get in with the union hopefully it’s the best to work for my dad and older brother are in liuna92 for Edmonton/ab and I agree aha lots of people here abuse drugs alot of “hookers n blow” 😂 but I stay clear away from any substances just gotta stick with my caffeine Pills here and there!
Nice vedio I have worked 2 pipelines sand blasting and coating crew operator.The coordination and precision on pipe lines are amazing and the $$$ is excellent.
They forget the 30 people they send into the courthouse to do all the title work, the land man who acquires the ROWs, the road crew building roads into the ROWs, clearing crews, blasting crew all happens before stringers, pipe gang or fire line even show up to shanties!!
They did leave out a very important step and crew. Wherever there is a break in the line for what ever reason, maybe a creek for example, a bell hole is dug so that ppl can safely get in. Then they weld the two sections together in the ditch. This is called a tie-in. And it's a very important step to a pipeline.
And what if the torrente in full, drags the link what happens? The connection is interrupted and it is not good, perhaps it is better to dig a deep excavation under the stream.
Been there done that...but preferred pipe fabrication work as compared to somewhat monotonous pipeline welding work.......but, money was good...... $ 36 to $ 40 per hour for Rig Welding rate back in the early 80's ......
Galo Herandez sorry to correct you, but it’s Nothing FINER than a pipe liner. Haha. I’m sure you remember every welding rig had that sticker of a side boom with that saying under it. Congrats on retirement!!
Great Video but you left out a major process, holiday inspecting (jeeping) the coating on the pipe. The coating on the entire pipe is inspected prior to burying to make sure there is no damage to the protective costing, continuous protective coating will make sure the pipe maintains its integrity over the life of the pipeline.
There's a step missing (or I don't understand). How do miles of pipe, or even 50 pieces all welded together above ground, get lifted and lowered into the ground all at once?
They did leave out a very important step and crew. Wherever there is a break in the line for what ever reason, maybe a creek for example, a bell hole is dug so that ppl can safely get in. Then they weld the two sections together in the ditch. This is called a tie-in. And it's a very important step to a pipeline.
HELLO DEAR CRC, I AM AN ARGENTINIAN ENGINEER, AND I WOULD LIKE TO CONTACT YOU TO REQUEST PERMISSION TO USE IMAGES FROM THIS VIDEO IN ORDER TO SHOW ARGENTINES THE PROCESS THAT CRC EVANS CARRIED OUT IN THE PRESIDENT NESTOR KIRCHNER GAS PIPELINE. I THANK YOU FOR CONTEMPLATING MY REQUEST TO BE ABLE TO BRING EDUCATION TO THE HOMES OF MANY ARGENTINES. BEST REGARDS, Lucía.
Only thing I will say is they missed the actual starting crews that make the job happen. Access crew, GradeGang, then stringing and long comes pipe then the job is flowing full bore. You can’t do anything on a pipeline especially pipe wise. Until access and grade crew come through that’s for sure. Good video tho!
When using the semi automatic welding in the huts...... what weld process is being used ?? Short arc Mig ? RMD ? Pulse spray ? .... just curious being ran downhill with the buggies..... thank you..... great work too !!
You forgot the Jeep the pipe, To find any deficiencies in the coating or pipe, After repairs are made, then it is put into the ground and buried. The process is then repeated when it's tied in, welded, coated, Jeeped,covered. I'm this is not the beginning or the end of pipeline work and has to be maintained year around.
@Bradley Powell Thanks Brad. Can you please tell how the next joint is done with the next stretch of pipeline? I mean is it done inside the trench or outside?
If they know where each pipe section goes, and must already have documentation of the topography in order to know where the right of way is, why can't the pipe be bent at the factory where it's likely to be a lot easier? Buildings are built with girders made for each exact placement according to specifications, so why not pipe?
I believe it's for the ease of transportation as unlike building components the pipes are enormous in size and are usually shipped in standardized containers.
I work this company good outfit.winter is very tough and demanding work.the worst is frozen muskeg you must watch crack in soil all time good wage and benefit period.I work 30 years no regret.
Plus energy right of ways when completed and reseeded with grasses and legumes like clover offer great wildlife travel corridors and habitat for scores of wildlife, from bugs right up to big game animals.... !!!!!!
Enbridge is the only stock you will ever need. A 6% yield and future increase. Welfare tree hungers and enviro loser terrorist are crying as line 3 and 5 are going through as we speak.We all need oil and gas to survive to heat our homes and for all transportation needs. Thanks , for posting and all doing the research. Others such as PPL , TC and Ipl are also excellent picks for rsp or tfsa or investment accounts.
I can't believe they showed a weld with sooo much high low in it. A lot of waisted time using all that shitty. A crew of men could pipeline way faster, I promise you.
Very good video showing basic process of pipeline construction. There are several additional crews and steps required for completion, but nonetheless a great video for those who are curious about how pipelines are built.
I usually work on tie-ins, bores or access crews on big inch union pipeline jobs in Western Canada, it’s a great way to make a living, being outdoors all day, seeing what we have accomplished in a day is very gratifying and the money can’t be beat. We are away from home for months at a time, but usually after a project ends we get time off at home before the next project starts. Love pipelining and would not do anything else.
im doing tie on steep slopes right now on the cgl, hard stuff been 1 week so far im 19 years and very very green😆 but I’m slowly learnin!!
@@PotentialGaming hang in there, work hard, stay safe and take care of your coworkers. The CGL project is a great opportunity for us, I’m on it as well and currently in Parsnip camp working on spread 3.
Tip: stay away from the druggies and partiers, there will be plenty of time for that when the project is completed, it’s just not worth it.
@@doesntmatter5704 thanks man and I agree 100% im always asking questions and getting the affirmative before doing anything that is remotely close to hazardous, i understand how dangerous this job is especially on the environment im at. better safe then sorry im at spread 2 with surerus murphy mt merrick lodge is that for sa energy? wanna get in with the union hopefully it’s the best to work for my dad and older brother are in liuna92 for Edmonton/ab and I agree aha lots of people here abuse drugs alot of “hookers n blow” 😂 but I stay clear away from any substances just gotta stick with my caffeine Pills here and there!
Nice vedio I have worked 2 pipelines sand blasting and coating crew operator.The coordination and precision on pipe lines are amazing and the $$$ is excellent.
Barney Roberts please sir im so interesting if you can please contact me in email. karimferhat806@gmail.com i need helping
They forget the 30 people they send into the courthouse to do all the title work, the land man who acquires the ROWs, the road crew building roads into the ROWs, clearing crews, blasting crew all happens before stringers, pipe gang or fire line even show up to shanties!!
Nice teamwork and the use of modern day technology to be efficient in Pipeline Production .....
They did leave out a very important step and crew. Wherever there is a break in the line for what ever reason, maybe a creek for example, a bell hole is dug so that ppl can safely get in. Then they weld the two sections together in the ditch. This is called a tie-in. And it's a very important step to a pipeline.
And what if the torrente in full, drags the link what happens?
The connection is interrupted and it is not good, perhaps it is better to dig a deep excavation under the stream.
Thanks for such complete info & understanding! Just what we need.
Been there done that...but preferred pipe fabrication work as compared to somewhat monotonous pipeline welding work.......but, money was good...... $ 36 to $ 40 per hour for Rig Welding rate back in the early 80's ......
Nothing is better than a pipe liner, I was a good boomer I'm retired after 30 years in action👍
Galo Herandez sorry to correct you, but it’s Nothing FINER than a pipe liner. Haha. I’m sure you remember every welding rig had that sticker of a side boom with that saying under it. Congrats on retirement!!
Soundtrack had no business going THIS HARD
Great Video but you left out a major process, holiday inspecting (jeeping) the coating on the pipe. The coating on the entire pipe is inspected prior to burying to make sure there is no damage to the protective costing, continuous protective coating will make sure the pipe maintains its integrity over the life of the pipeline.
There's a step missing (or I don't understand). How do miles of pipe, or even 50 pieces all welded together above ground, get lifted and lowered into the ground all at once?
8:41
They did leave out a very important step and crew. Wherever there is a break in the line for what ever reason, maybe a creek for example, a bell hole is dug so that ppl can safely get in. Then they weld the two sections together in the ditch. This is called a tie-in. And it's a very important step to a pipeline.
With cradles and multiple sidebooms.
HELLO DEAR CRC, I AM AN ARGENTINIAN ENGINEER, AND I WOULD LIKE TO CONTACT YOU TO REQUEST PERMISSION TO USE IMAGES FROM THIS VIDEO IN ORDER TO SHOW ARGENTINES THE PROCESS THAT CRC EVANS CARRIED OUT IN THE PRESIDENT NESTOR KIRCHNER GAS PIPELINE. I THANK YOU FOR CONTEMPLATING MY REQUEST TO BE ABLE TO BRING EDUCATION TO THE HOMES OF MANY ARGENTINES. BEST REGARDS, Lucía.
Great video, thanks for taking the time.
Only thing I will say is they missed the actual starting crews that make the job happen. Access crew, GradeGang, then stringing and long comes pipe then the job is flowing full bore. You can’t do anything on a pipeline especially pipe wise. Until access and grade crew come through that’s for sure. Good video tho!
When using the semi automatic welding in the huts...... what weld process is being used ?? Short arc Mig ? RMD ? Pulse spray ? .... just curious being ran downhill with the buggies..... thank you..... great work too !!
GMAW - Wirefeed with argon shielding gas
Great video. Thanks for that!
You stole my childhood. How dare you!
WTF is wrong with you Greta???
You have insurance on it, right? Buy another one.
Forgot the hydro test and clean and dry
You forgot the Jeep the pipe, To find any deficiencies in the coating or pipe, After repairs are made, then it is put into the ground and buried. The process is then repeated when it's tied in, welded, coated, Jeeped,covered. I'm this is not the beginning or the end of pipeline work and has to be maintained year around.
What's the maximum length of Pipeline that can be lowered in the ground by side booms together at once?
@Bradley Powell Thanks Brad. Can you please tell how the next joint is done with the next stretch of pipeline? I mean is it done inside the trench or outside?
@Bradley Powell Awesome. Thanks much Brad. Very insightful info.
what is the machine they use to weld?? ive never saw one before.
+thomas beattie It`s a P600 welding machine made by CRC-Evans
Im only new, i just want to ask why there are no hydrotesting there?tnx for the answer
Great video
Good introduction of this construction! Thank you
Theres also other elements like Anomaly crews HVac , Environmental crews , fencing crews , tie-in crews , line locaters ,
Hi, do you radio graphy automatic welding ?
What's that @ 6:20...?
Sandblasting
@@grayzfulsortie3772 Left cap toe...
Cool video, thanks!
What is the meaning of crc
Thks for upload of videos
how are the pipeline sections that are lowered into the ground by the pipe-layers weld together?
saif parishwadi they dig a bell hole then get in the ditch and weld the two sections together. This is called the tie-in crew.
Big thumbs up 👍
I worked on this line.
wow imprecionante trabajo felicidades por tu trabajo :)
maria angelica vazquez
Tf
Thanx, I've always wondered how pipelines are built.
Don't forget access part, the part that makes the right of way, so that every other part is possible
JudoKnockoutArtist They also left out Tie ins and hydro test.
#clearingcrewgetsitdone
great video, thanks
Very informative, thanks a lot.
How does someone get in this line of work
798 is a good place to start
the pipe is so flexible, just like a rope!
Zhe Wang Good observation. Most people don't believe me when I tell them how much flexibility the pipe has. I was amazed when I first saw it.
If they know where each pipe section goes, and must already have documentation of the topography in order to know where the right of way is, why can't the pipe be bent at the factory where it's likely to be a lot easier?
Buildings are built with girders made for each exact placement according to specifications, so why not pipe?
I believe it's for the ease of transportation as unlike building components the pipes are enormous in size and are usually shipped in standardized containers.
I work this company good outfit.winter is very tough and demanding work.the worst is frozen muskeg you must watch crack in soil all time good wage and benefit period.I work 30 years no regret.
What happened to Jeep and rock shield, or all the sand bag hands that build up bed piers?
Mais est que vous par du telephone media controls leur condetions et leur salaire?
Great times for me back in the 60s home and abroad....
I hate how the welding machines are all automated now.
I hate repairs
Chad Soke
Spoken like a Supervisor or a Cwi lol
Kia ora mo te titiro ana e hoa, tangata o muri(ole skool) fala ko ahau ra - kaapai video
thank, a lot keep it up!!!, it's awesome!
good effort
Magdy Tawfik مرحبآ اخي
Je ke envlob que cet est que vous duscutez?
Great video but far more work goes into a pipeline job. Wonder if 798 likes that welding machine.
798 runs that machine
798...7 days, 9 welds 8 repairs
Where does one apply for employment in North Carolina???!!!??
good vidio and subscribe
No tie ins wtf
Deadly
Ищешь русский комент? Вот он!☝️
Нашёл!
@@alexkay2809 кросаучык!👍
@@сергейлукьяненко-г9ф Глянул на трубу тут!
@@alexkay2809 ты из этой сферы деятельности ?
@@сергейлукьяненко-г9ф Эксплуатация и ремонт. От 720 до 1420, МГ.
Dam machines terk yer jerbs.
RUS на pfm работаю. Работа интересная.
Plus energy right of ways when completed and reseeded with grasses and legumes like clover offer great wildlife travel corridors and habitat for scores of wildlife, from bugs right up to big game animals.... !!!!!!
I say put the pipelines every where they are needed. I don't see where this hurts the environment at all.
to hell with wire.real men weld pipe by hand
dam right real men weld by hand not hot glue guns
@@charlesnelson2417 the hell with cars real men walk
It’s just a means of speed. Speed gets the contract.
@@oshkoshbegone The hell with walking, real men just teleport everywhere.
Very informative A, music D-
عمل منتازتحياتنآشركة السندان الذهبي
Thank you, Good Posting
Enbridge is the only stock you will ever need. A 6% yield and future increase. Welfare tree hungers and enviro loser terrorist are crying as line 3 and 5 are going through as we speak.We all need oil and gas to survive to heat our homes and for all transportation needs. Thanks , for posting and all doing the research. Others such as PPL , TC and Ipl are also excellent picks for rsp or tfsa or investment accounts.
Lol just skip the tie-in crew and bores ect.
Stick welding seems faster and more economical.
mike pili 😂
Неееет ни когда!
انا اعمل سائق معدات ثقيلة (سايدوم /شفل /حفار
Стенка только толще у трубы 23-27,6мм.
Wow that looks expensive.
Cheaper than a railroad
U forgot tie ins
Moi ..condecteur...sid boom
THANKS
Caterpillar 561 operator me I need a job please help me
A worker under the load ??? This pipe weighs several tons. Where is the safety?
Walking under the pipe load with a skid what company is that dumb blue ribbon welding lineing you're pockets
Pipeline Construction
I have seen welders freehand better than that machine weld.
As long as it passes inspection...its going to be buried out of sight.
Good video and information terrible music
Be afraid welders this is the future , what's yours ???
Welders are the people using the welding machines in the video.
Ahh I can do that and I will do that again but just different ya up North hipsters. Is still A life for me thanks.
I can't believe they showed a weld with sooo much high low in it. A lot of waisted time using all that shitty. A crew of men could pipeline way faster, I promise you.
798 byoches
Imprressive.
Pretty ugly weld that by machine !
Regardless Visage de fie que il resois de vaccination.
667551
хера там подрезы
Not even close to Serimax...
CRC with high repair rate
C. C vc. The y
Ahhh onshore. Must be nice, being able to work without NATO warships harassing you, and new sanction threats every month.
No hydrogen pressure testing or pigging the the integrity of the pipe. Only in America 🇺🇸.
Россияне учитесь работать а не через жопу все делать
Да не точ то русские