AMG C63 QUAD PIPE DIFFUSER installed on 2015+ Mercedes C300 W205
HTML-код
- Опубликовано: 14 мар 2020
- How I removed the stock oem diffuser on a 2015+ Mercedes-Benz C300 W205 Sport rear bumper and installed a AMG C63 Gloss Black Quad Pipe Tip Diffuser!
Please note: The seller I bought my diffuser from no longer carries the BLACK TIP version for the W205 sedan.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Where to buy:
"Chrome" Tip Diffuser for 2015+ W205 C300 4 door sedan with sport rear bumper
EBAY: ebay.us/nO1M2c
AMAZON: N/A
Music Credit
RUclips - "Rage"
RUclipsr - "Palmtrees"
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander. 
Авто/Мото
![MAF Teeski - Whole Thing (feat. VonOff1700) [Official Music Video]](http://i.ytimg.com/vi/SHWEj-ndz6g/mqdefault.jpg)
as long as you don’t throw an AMG badge on there you’re good
never have. never will.
Why is that?
@@AB1337_ cause it’s not an AMG
You will never find an amg badge on my car unless it’s was purchased as a true amg.
💯💯 4 real
For everyone reading; The ‘spare’ plastic piece lines up with the six tabs on the bottom edge of of the diffuser. Even if it doesn’t belong with your model, it will give extra rigidity. It supports wiring and other stuff on some models like my S205 C250d. It simply clips onto the tabs. Easy!
Ended up getting this Same Diffuser for free, (long story). Put it on sunday, and it took me less time than I thought it was gonna be.With a little bit of help of course. Looks spectacular. Thanks Flexx!
Hey did you end up using that center piece that he didn’t?
Looks way better brother..it stands out more now🔥😎
I've watch this video months ago, because I wanted to install a carbon fiber diffuser on a 2017 AMG C43 Conv. Great video and it helped me to get a good idea about a diffuser install, but for what it is worth I had to remove the complete rear bumper for a clean install. Keep up the good work Flexx
Yeah. My diffuser wouldn’t snap in well and it would of been easier if I removed my rear bumper but if I have to remove one less thing, it’s fine by me. I was able to pound the diffuser with my hand for the tabs to snap into place.
@@TheFlexxGarage btw .... you convinced me and I ordered the Android screen from DMP using your flexx coupon !
As always: very well explained and great demonstration video! Loved it 👍👍👍😀
It looks amazing ,loved it
I hope you will put the new screen soon
looks sick!
Great video bro!
Looking very nice man
very nice u have got to good tecnology for your work! good luck
I had installed them 2 years ago on my car. We even took bumper off to get rid of gap which upper side of bumper gives. But we ended up exactly like u.
Looks good
Your honesty is the best.
I would have never used a zip tie because that looks cheap and not professional. Instead use automotive bolt with a nut and that would look better and more secured. That's what I did when I installed the E63 diffuser on my 2016 E400. Rivets can be a pain and I rather used nuts and bolts. Overall the new diffuser with the gloss black quad pipe tips look awesome! Nice going Flexx! 👍
It’s not coming off. I’ve had zip ties on 3 diffusers in my past cars. Plus..I don’t care about clean install. Nobody is crawling under my car anytime soon to judge my work. Hahaha
true...😅
@@TheFlexxGarage I just bought a kit, seems like the brackets wont attach to the diffuser, but it attaches to the tips, how do you know which diffuser kit is right for your bumper?
Nice bro
That’s 🔥🔥🔥 bro I have a 18 w205 I want to do mines but with the chrome tips
That bit that you couldn't work out where it went sits flat on the back of the diffuser, it holds the aerials for GPS and DAB. it also helps to stiffen up the diffuser
Thank you for this video I just followed your steps and installed my exhaust and diffuser and it looks great! If it weren't for your tips I would've definitely ran into a lot of problems and wasted time. Would you ever consider doing ambient lighting?
I'm definitely doing this
Great video. So that black part is so you can mount plastic piece that you need to transfer from original diffuser so you can have place to use oem bolts under the car.
So yeah you can use rivet or extra bolts to join oem plastik and new one you recieve with diffusor.
very good
nice video i have all understand
Looks so good! Glad you’re feeling better! Great video!! 🔥🔥🔥🔥
Thanks homie
looks easy enough will buy one now
and yes got rivets
is it worth the money?
Nice
Got the same kit, bumped into the same issues as you, but it looks gorgeous. I took the bumper out and put brackets alongside the diffuser cause the clippers in the diffuser aren’t deep enough.
Yeah...I went back and did some more "slapping" and I finally got mine to all clip in. It's definitely easier to clip in if the bumper is off but I just hate removing body panels. They always take awhile and sometimes they never align perfectly when putting back on the car. I guess I'm just lazy. hahahaha
@@TheFlexxGarage looks great. and its nice that you're doing honest reviews and show the little flaws that happen here and there and how to fix them. keep it up! :)
Great Video! Do you know if this kit will work with a C450?
I like the stock actually
Very nice. Is this diffuser and the exhaust pipes orginal Mercedes-Benz, or a aftermarket produkt from asia?
Can I use my same amg tips if I take out the diffuser
Just did the diamond grill install on mine took 3 hours being carefully I just forgot to install the foam thing in the middle 😂 , flex are the tips plastic ? This will be my next mod , I also did the BOV from a cla250 sounds awesome
Hey nice vid 👌🏻
Do you know how to remove the rear bumper trim as well? Diffuser on diesel model.
Hey Flexx,
Could you update link? This one is no longer available. Could you give it a few moments and see what your next choice would be? What was your cost so I can stay in the same price range?
Hi
Can you provide me the online link where I can order a diffuser for a 2013 E350?
Thx
Where did you get the mental brackets for the tips ?!
Hello Fiexx, could you tell me the size of the rivets to hold the diffuser?
Looking fantastic flexx!! I'm going for the same style on my silver c300. Put some black powder coated rims on it and it'll look muuuuuahhhh
Do they make e300 diffusers ? 2017
I have c180 and tried to install almost same type of rear diffuser, but fking exhaust pipes are as an obstacle on the driver's side so the tip doesn't fit.
Anyone know where I can find a diffuser for a 2018 convertible W205 c300. I wanna do circular quad tips but these diffusers are impossible to find.
Hey I was just wondering if U can provide a link for the E Class w213 same product?
Do you mind making posting all links for all of ur mods so far? 🥺
Any plan to do the electronic valve cut???
After watching this video I bought this same mod for my car. Side note for viewers, at 1:35 where he used a screw driver to remove the “Tubes”, I have rivets. As I start the installation, I’ll come back and edit my comment for anything that may be different from what I’ve seen in the video.
I installed using rivets. The tool costs only 16$ at auto zone and pep boys. I assume whoever orders this kit may come with Rivets . Easy to get and better stability. I did although use zip ties on the inner brackets
I have rivets too what do I do?
@@Glenngabriel1 what do rivets do ? And what do they look like if I’m looking to buy them
From auto one
Would this fit on my w205 base model c300
Can I fit this kit on c220 2017
Hey man loving ur videos bro !!!! Any update on the making the 2015+ c300 headlight upgrade video ?
Go look on my Instagram and Facebook. The answer is there.
Nice. I had the same experience with the diffuser center tabs not 100% clicking into place. Seems like for $295, you get what you pay for. Lol
I paid $200. Every listing is jacked up now.
Hey flex, thank you 🙏 this helped me a lot and i saved money by not going to mechanic…… but i have a question i got diffuser red light with it can you please tell me how do i connect the diffuser light with tail light?
Did you ever find out brother I just ordered one but no idea how to do it please hit me up on Instagram if you did find out my @ name is Upndbout
Hey guys where you able to get the diffuser light connected I also need help with that
cool mod, but waiting on the headlamps video
I already posted about this on my Instagram and Facebook.
If you are located in Los Angeles, Can you please help me install these type diffusers on my E class and front grilles... I am so lost
Sorry. I’m on the eastcoast and I don’t work on other people’s cars.
Flexx - did you ever resolve the issue with the 3 clips. I literally spent hours trying to fit mine today, and had exactly the same issue. Ended up going back to stock as it looked so bad.
@Marc Tough Did you buy the same Diffuser? Is it the one on Ebay for $179?
F it. I'm getting it anyway 🤣
That looks funny
when you smack the diffuser in that doesn't work on mine? even with the factory diffuser if I try to smack it it doesn't click back in?
Probably gonna have to take the rear bumper off and installed the diffuser while the bumper is off. P
can you explain how you went about pushing the middle clip into the bumper i installed a diffuser and the middle just won’t budge im pushing it hard as hell!
Put one hand behind and push from the outside. I also hammered it in with the bottom of the fist with quick, strong hits.
Hey are thinking about removing the blank buttons and making them functional?
I was thinking about that too but I'm not sure how tough that would be
8:09 it sticks out. Even your finger bounces :D
It’s not gonna be 100% perfect but better than stock.
@@TheFlexxGarage Awesome :)
What ever you do remove the c300 logos
I did on mine looks way cleaner and easier to wash!!
the double exausts in both sides fits with the original diffuser?
No
Hi, great job ! Can insert to c-class model 2019 W205 ?
You can if you have a sport rear bumper like mine.
nice bro but a c300 with amg exhaust doesnt look right imo
Is it the same process for a W213 E Class?
I know right I clicked on the link but I didn't see anything for the E300 2017
I like it !!!! just debage the c300
Hi is this diffuser gonna fit if your car have fake exhaust? I mean only 1 pipe for example c250d limousine. My exhaust tips are fake
you have to have the AMG line rear bumper for this to fit. not the luxury rear bumper
Do exhaust tips improve the sound? Thanks
No
Nice! Does it fit on the W205 estate version? Thx G
Don’t know. We don’t have the c-class estate in the USA.
I have a 2016 c300 4matic luxury.....can I replace the rear bumper with the sport style or AMG style bumper and diffuser
I HAVE THE SAME QUESTION
Yes you should be able to, there's some diffuser kits available on places like Aliexpress which are designed for the luxury spec
Flexx bro did you buy the rear amg bumper or it came with the car from factory ? I have the base model with the ugly rear bumper lol and i am trying to buy one without assist parking aid holes for a cheap price too any suggestions? Thanks
It’s a stock C300 sport bumper. It’s not an AMG bumper. The only change i made is the diffuser and tips (which is clearly in the video.)
I managed to find one on eBay, just installed it yesterday. They’re out there but hard to find.
Not only that but I had to buy parking sensors to fill the holes but they don’t function since my model doesn’t have that feature
@@czechiann can u guide me in the right direction I also have base model 2016 c300 and would love to install this
@@albertodiaz7616 same here ive been looking for one for a while actually
$25 for the rivet gun at Lowe’s. I did it to my c450 about 1 month ago
Oh man, every time you say "some of you more anal about it" I know you mean people like me. Seeing those tips tilted like that would irk the crap out of me!
Nice video though!
What are some dope AMG style diffuser's for 2016 Mercedes C300
This one
@@earockg7988 there are way better ones
@@freebands7269 like what
would this diffuser fit my 2019 amg line facelift w205 sedan?
It should fit because the 2015-2018 AMG line rear bumper is the same as the 2019 AMG line c300. but you need to reconfirm with the reseller selling you the diffuser.
you thinking about doing an exhaust mod?
Eventually. Still trying to figure out my best setup for it.
The wreckless drilling and damage and zip ties were cringy lol, the replacement part looks very cheap and flimsy, but great video nonetheless!
Middle bracket thing doesn't line up with c43 amg 2018 either
Left it off for 5 years and diffuser is still fine.
I hope you don’t put or act like you have a real amg, but I no doubt the amg stuff always looks better then non amg
If you know me based on my past 100+ videos, you would know I’ll never be a poser and slap an amg badge on a non amg car.
Why does that bother you if he did slap a badge on his AMG? He can do what the fuck he wants to do as if you own Mercedes Benz Manufacturing Plant. What ever he comes up on AMG badge or not Dodge Chargers, Rams, Challengers and Demons will smoke his ass and your ass! The badge means nothing for none of the Benz’s😂 also I don’t mean to insult you or even embarrass you I am just telling you the truth. Cheers mate 🍺🍺
PS. Wish I had a AMG C45 or a Dodge Demon!!
@@BlakWiseCracker There is no C45.
I’m just wondering if I install this on my car will this void my factory warranty?
I'd also like to know this as I was considering the mod too. Most likely they will say it's not stock and work not carried out through them so not authorised I'm guessing. Think I'll stick to just having my original part wrapped black
@@singhsang6141 k
Whyyyyy would he do red accent gloss paddle extensions……. Why ?? ???????
Why wouldn’t I. It’s my car.
I will pay to get this done on my car???
Are you available in NYC
I NEED THE GRILL DONE TOO????
Bro just order it and a lot of Bodyshop in nyc can do it
So I got a c43 amg 2018 will this still fit ?
It should
If it’s the sedan yes, idk about the coupe tho
Just the tip
The middle piece is for the 2 tips to join up. Your replace the old parts with the new plastic and it lines the exhaust up and pushes the diffuser in properly. The two things yours didnt do because of this. Fitted mine yesterday
mine is not even close to attaching the 2 tips. It was basically useless. You might probably have bought a better kit then mine.
I just did this and for the middle clips you need someone to help you push from behind
Yeah. I fixed it after I made the video. How were your tips? We’re they straight?
@@TheFlexxGarage yes actually, I used the bracket from the oem diffuser not the middle piece but the 2 small pieces that attached to it.
@@AlDabbas what do you mean push from behind? you aren’t able to push on the back because of the brackets
Sup Flex! Awesome vid as usual, I think I know the reason you are saying the exhaust tips dip down a little bit. At 5:40 in your vid then you are mounting them back up with the zip tie, the holes were way off. I could be totally wrong , just trying to help. I’ve been looking for a rear diffuser for my 2018 c300 with the square tips. It just looks so dope! My car came with the AMG sport line body and interior which I love just wish I had that bi turbo. Lol. Keep up the great vids brother! Walt, instagram @tintcrazy
nope. It's just the tips. The 2 hanging hooks that I installed onto the plastic bracket...those hooks are not the same length..that's why the tips hands uneven. That's the nature of aftermarket parts. They'll never be perfect like OEM. I can probably take off the tips and bend the hanging hooks but i dont care. They are good enough as is...unless it gets on my nerves.
Hey alex where did you get the lip on your trunk?
Go watch the video I made on it
@@TheFlexxGarage hey thanks man!
Now I've seen this I'm not going to bother!
Lol
I wanna see mods ur exhaust
It will happen as we get near summertime.
Lol guys you have you use the other brackets from the oem diffuser and swap it to the new diffuser that's why nothing is lining up these diffusers don't come with everything you have to reuse from your oem diffuser
Do a parking sensors mod
Tippy35075 pointless with back up camera, not to mention their annoying lol
Will it fit even tho my bump looks different on the coupe
Coupe and sedan got different diffuser so be sure to take one for a coupe
@@ballistichead1328you sure? They look identical?
Wouldn’t tie wrapping everything affect the re-sale value on this car?
I don’t buy cars worried about resale value. I buy cars to enjoy and make videos to help the car community.
Buddy driving these affects the resale value 💀
THANK GOD FOR TIE STRAPS HEY.
If they can handcuff a criminal...they are good enough for my diffuser. Hahaha
The video is great, but this difuser is a very bad copy. There is much bether on the marcet and it fit perfect.
What happens if I have the parking sensors?
Then you transfer it to the new diffuser. There's holes for it.
Flexx Alexander thanks man
That’s what the bracket is for that Flexx threw away ;-)
You should take off the c300 logo in the back
Subscribe and watch my videos and you will see it’s been done.
Are the tips in plastic???
No, the tips are full metal with metal trims. I just received mine today and mine are chrome, stamped with the AMG logo. I’m very impressed by the quality
The diffusor itself looks nice, but dude,, the offset of those ugly wheels are really bad, and besides before you install any AMG kit to any non AMG car you should've already lowered your car.
Bonjour tu parle un peu french
It would be even better if the tips had the AMG stamps on them.
Nope. Car is not an AMG.
I agree. Mine has the stamps on it. It’s an AMG :-D