Build an Arduino Robot That Follows Humans
HTML-код
- Опубликовано: 16 сен 2024
- Today iam gonna make a human following robot using Arduino.its very simple project.anyone can make it.
if you've enjoyed watching this video please hit the subscribe button and prees the bell icon so that you'll get notified when we upload new videos.code and diagram download link has given below
subscribe and support:youtube.com/@c...
-------------------------------contact------------------------------------
Instagram: ...
Instagram:
----------------------------------------------------------------------------------
code:drive.google.c...
diagram:drive.google.c...
products:
Arduino Uno: www.flyrobo.in...
servo motor :www.flyrobo.in...
ultrasonic sensor: www.flyrobo.in...
jumper wires: www.flyrobo.in...
gear motor and wheel: www.flyrobo.in...
L293d motor driver sheild: www.flyrobo.in...
ir sensor: www.flyrobo.in...
battery holder: www.flyrobo.in...
battery:www.flyrobo.in...
music used in this video
musics provided by non copyright sounds
song - Ehrling - You And Me (Vlog No Copyright Music)
watch - • Ehrling - You And Me (...
song - NIVIRO - Flares [NCS Release]
watch - • NIVIRO - Flares | Hous...
**********THANKS FOR WATCHING************
**************************************************
#ArduinoProjects #ArduinoRobot #ArduinoCar #arduino #scienceexperiment
#how to make arduino human following robot #humanfollowingrobot #arduino humaniod robot #how to make human following robot
#object following robot #humanfollowingcar #arduino uno projects #how to make object following car #obstacle avoiding car #obstaclefollowingrobot
I daily see this video nearby 2-3 times really l love this video soooooo Much ❤
Thanks
I like the video
Thanks
brother i have done as per you video but my bot is going only fotward with full speed.The code is ok.If i calibrate the ir sensor potentiometer will it work?Please reply brother
Yes. You need to calibrate the potentiometer on both sensor. Then it will work fine
Bro you cannot connect usb to phone how is it possible? It can ve done to laptop only.
We can connect USB to smartphone by using a otg cable you can buy it easily from the offline or online market. Before that make sure that your phone has otg support
Can we connect usb to our type c charger and then to phone and then upload code. Is it possible bro?
If your smartphone is C-type then you want to use C-type otg cable. It's very cheap you can get it for 100 rupees or less
Which jumper wires to use male to male or female to female or male to female
L293d motor driver sheild does not have male or female connector as in the circuit diagram. You need to solder male pins youself or as in my case I soldered it myself.
You can use female to female jumper wires for this.
(Answer for yesterday's question)
LL293d motor driver sheild does not have female connector as in the circuit diagram but the connections are correct. Because in both case the pins are same. You can check the community post that I just posted or you can check the schematic diagram from here for easy understanding:drive.google.com/file/d/1B3ekO8CoW3wRykd6b3Bgqed4q0iIGqY4/view?usp=drivesdk
Hoping this would help you
That I have done but tell me which jumper wires to use.
You can use female to female jumper wires
Can we use male to female
For connecting the sensor you want female to female jumper wires you can't use male to female jumper wires
Hey bro I'm having some doubts in your circuit diagram.
Please tell how to join black wire of ultrasonic sensor and infrared sensor together in at one place.
Please tell 🙏🙏🙏🙏🙏🙏🙏
You can connect both black wires together. Because the black wire is common. you can connect it to any negative terminal
How to appload sketch in arduino by google drive please explain in details.....
and tell from where we have to download
You can download the code from the link given in discription. I will make a dedicated video on how to use Google drive with Arduino
The robot is moving only forward. Not turning left or right. What to do? Please help...
Check if there's any error in the code and reupload the code
@@Creativemind_official Thank you for your reply. While compiling and uploading code there is no error. I will try to reupload the code.
Any adjustment need to do on the small blue color potentiometer behind IR sensor module.
Turn the potentiometer slowly and put your hand in front of it and do it with both sensors
@@Creativemind_official I will do it and let you know. Thank you.
Arduino Droid is not available
Can we connect motors to l293d with simple wires or have to use jumper wires
You can use any wires for the connections.
Jumper wires are just for ease of work. You can solder any ordinary wires. I have provided the links in the description to all components used in this video. You can buy from there if you want
Bro we have to connect the another end of USB with our phone and then follow the process in the app ??? Is it naa
Yes
Sir it is showing compiling error.
Please help 😢😢
You need to download the necessary libraries
Click on the "three dots" on top right corner
Then go to "Libraries"
Then "manage libraries"
Then "available"
Then search "Newping"
Then download that library.
After that Search "adafruit motor sheild library"
and download that library.
Then try to compile the code
@@Creativemind_official thanku soo much sir it's compiled.
Thanku very much sir..... 💕
I upload code the robot right sensor is working forward and left sensor is walk in back . Please help me
Change the motor wires polarity
@@Creativemind_official I tried
@@Creativemind_official but motor is worked but move forward and back but not turn right and left
@Farhan-h6k check if there's any problem in the code and make sure all the sensors are working. You can check the ir sensor by placing your hand in front of it and the led should light up
Can i join any wire of gear motor to motor driver
After uploading the code You may need to interchange the wires if it's not rotating the right direction
Please help i am providing 7.5 volt in to the project and not working please help
Make sure to remove the jumper if you're using an external power supply to the motor driver sheild. Make sure to upload the code correctly and make sure all the motors are working or not.
Make sure to connect all wires correctly Refer with the circuit diagram given in the description
@@Creativemind_official I have checked all things fine but not working at all
@vickyrox1965 check if the lights on the Arduino is on. If it's working place your hand or any flat object infront of the sensors it may work. you might need to adjust the ir sensors sensitivity and placement for it to work fine. If you've already done all of this and still it's not working then try uploading a simple code example: ''blink code'' to the Arduino to know whether it's the Arduino's fault
@@Creativemind_official ok
Showing no connected boards found
Try changing the board as 'Arduino Uno ch340' in the app settings or try reconnecting the board and try again. You might need to check some RUclips videos for troubleshooting. If it still doesn't work it would be the faulty arduino.
@@Creativemind_official with computer it is responding but please tell which libraries to install there to make it work
You have to install the AFMotor and NewPing library Before Uploading the sketch. You can find all the required libraries from arduino library manager. In your case you said that with computer it is working but not with the smartphone. Yes it may happen if the Arduino board is not genuine or if it's a clone version. Some clone version work with both smartphones and computer as in my case
is is 360 or 180 servvo motar
Both will work
And when i connect to laptop it work
You need to remove the jumper if connected to an external power supply.
Sir the motor driver i receive from Amazon is different from your please tell how to arrange pins of ultrasonic sensor and infrared sensor.
Please sir saturday is my science exhibition 🙏🙏
Which motor driver ?
Is it l293d (the one that I used in this video) or l298n (which usually comes in red colour
If you're using l298n motor driver you'll need to chage the code for the project
If you're using l298n motor driver connect the sensor pins as per this order↓↓↓
Ultrasonic sensor Echo pin to A5
Ultrasonic sensor Trig pin to A4
Right ir sensor out to A3
Left ir sensor out to A2
No sir I'm having L293D motor driver iska koi solution nhi h kya 🤕
It's not having pin where the wire will attach 😩
Can we use female to female wires everywhere
Yes, you can use female to female jumper wires everywhere
bro, how to fix " use of undeclared identifier ' stop ' "
Put // infront of 'stop' that should solve the problem
Motor1.setSpeed(0); //define motor1 speed:
Motor1.run(RELEASE); //stop motor1:
Motor2.setSpeed(0); //define motor2 speed:
Motor2.run(RELEASE); //stop motor2:
Motor3.setSpeed(0); //define motor3 speed:
Motor3.run(RELEASE); //stop motor3:
Motor4.setSpeed(0); //define motor4 speed:
Motor4.run(RELEASE); //stop motor4:
@@Creativemind_official how many code can put on adruino uno?
Bro code is not working 😢
What does the error says in the app
@@Creativemind_official can I got your contact no. Or something else jisse me aapse contact kr sku
I have to made to these project for my district level competition
@NarendraTanwar-br7jn what's the problem you're facing now
@@Creativemind_official circuit smj nhi aa rha h
Hello I want a help
??
Bro circuit diagram aur apki video mein difference hai. Please explain? Or re-upload circuit diagram
Tell me where is the problem so that I can assist you
Ultrasonic sensor and infrared sensor circuit not understood rest is oksy
5v and gnd are common so you can connect it to any 5v and gnd
How to coding in computer
Download and install arduino ide software then download necessary library and then the board type and port then upload the code
@@Creativemind_officiallibrary? What
Open the code in the software and read the top portion it's mentioned there which library to install. If you're using smartphone then click the three dots on top right corner then click on libraries then manage libraries then click on available then search for the library that's mentioned in the code. Or if you're on computer then click on the option tools then manage libraries then search and download the libraries
After all of that ensure ur selected the right board and port
This is any direct way to get you
@@Creativemind_official but arduino droid is not available on play store
Sir when i am uploading this code it automatically stops after running for around 1 min
Check if the battery has enough voltage
Sir i am giving it 7.4 voltage from 18650 lithium battery
Try uploadind the code again and test it .if that doesn't work check the code for any errors
I did that but the problem still persists
I checked for errors also
bro, my driveapp is empty
Download the code from the description and upload it to drive then open it from arduino ide or you can open it from device
bro, how many codes can put on adruino uno?
One code at a time
Can you put Bluetooth on it?
if you want you can do it . But you will need to add bluetooth functions in the code
@@Creativemind_official but how to add bluetooth function there