Hi, I love and am fascinated by your videos. One question: What Arduino program did you use to make that Bluetooth control please? It is not seen that much in the video.
hi, bro tommorow i have to submit this project code upload correctly. circuit is running on 7.14 v two cells but bluetooth is not connecting to app. please give solution of it
Bro I do this project lights in the motor driver, Arduino UNO and blootooth module is working but blootooth is not connecting ,i press the button in the blootooth module in that any issue
This issue may be due to the inadequacy of 9V batteries in supplying sufficient current for your Arduino Bluetooth car.Check with LiPo or Li-Iron Batteries 7.4-11 v
I well make this project but one problem i faced i am using same battery 2 but my l298 motor diver dont get power ( dont glow red light ) but arduino get power how and i think my moter driver is defective( kharab ) so i give power from arduino the red light start how i fix this problem i give power from coding cable ❤
wow i like your video it just very good thank you very much
😁💯💯💯💯
Welcome ❤️
how do I get wood chasis
Hi, I love and am fascinated by your videos. One question: What Arduino program did you use to make that Bluetooth control please? It is not seen that much in the video.
Code ?
My hc 05 blutooth device pair successful but it shows unable to connecting car what i do ??
Check RX ,TX connection and baud rate
Bro I want to use only Arduino UNO original?
Bro my hc05 is not asking password at pairing time and not connecting to any app
code file on nii ho rhe can you plz change tha link
hi, bro tommorow i have to submit this project code upload correctly. circuit is running on 7.14 v two cells but bluetooth is not connecting to app. please give solution of it
Thank you VERY much 🎉 bro🎉🎉🎉🎉🎉❤❤❤❤
Welcome❤
@@heshanpasindu it is working perfect I'm very happy thank you very much bro ❤️🎉
hi bro bro my app is connecting on 7.14v two cells. can you give m slution
and tell how you made it
Hi cod send please @@heshanpasindu
which camera you using for recording video
I did everything properly but its not coming 😢
How much price bro please details
6000rs
Minimum -1300 ₹
Bro I do this project lights in the motor driver, Arduino UNO and blootooth module is working but blootooth is not connecting ,i press the button in the blootooth module in that any issue
Check the Bluetooth module wiring from the diagram and ensure it receiving sufficient power.
Bro in the blootooth module I press a button in that any issue
Are you using any other type of Bluetooth module?
No bro
Bro for me app is working but code is not working
I checked, but there is no issue. Are there two files on your computer with the same name?
Can you download the code?
Bro I downloaded the code thank you bro ❤@@heshanpasindu
Are you Tami
❤
Thank you brother.
I couldn't find the software anywhere.
thanks for the link.
Welcome❤
Nice bro.go away as far as 🔥❤
❤
Can I use a different app? I have an iPhone
Yes, you can use any app , but you will need to modify the Bluetooth commands in the app or in your Arduino code to match the app's functionality.
how much wooden board length buddy?
Dimensions?
@@akershsahai9841 10 x 15 cm
please could you pass the code??🥺, The one in the description doesn't work
What is the problem? Can't open the file?
Hello. I also want to make a Bluetooth controlled car with PIC. What should I do, which application should I use?
Use a PIC microcontroller such as the PIC16F877A or similar
Bro, i do but my car is not running i connected Bluetooth module and same your circuit but don't work plz tell me
Make sure everything is powered up correctly
@@heshanpasindu yes bro
@@heshanpasindu Bluetooth was connected to the mobile but the motors are not running
@@vgs14trainer check motor driver connections
Bro where is the circuit diagram
check the description now
I have needed this car please deatails me ,and how much price
You can check the prices and details of the components for this car on AliExpress or other online platforms
I connect 3-9v battery my car still not work but connect to laptop with Arduino it work . please give solution for this
This issue may be due to the inadequacy of 9V batteries in supplying sufficient current for your Arduino Bluetooth car.Check with LiPo or Li-Iron Batteries 7.4-11 v
Good job 🎉
Thank you❤
Bro code is not opening
After downloading ?
What is the price of Arduino board
Can you please tell any other boards
You can also use ESP32, ESP8266, or Arduino Nano
vary from $10 to $30, and it may differ from country to country.
470 in Flipkart
can i use hc05
Yes
Hello sir my hc06 wont connect@@heshanpasindu
Check 5V power supply and RX TX pin connection
Bro my left side two motors are not going forward
Just swap the + and - wires for those motors
OK bro now it's working fine
@@adithyans3512does everything works? Cause I am thinking to start this for my project:)
😍
❤
Super brother🎉
❤️
Bro app and code is not opening
Bro me also app and code is not opening
I think the code is working. There is no error
I have need this please deatails me
🔥🔥🔥🔥
❤
Bro can i use normal moter
Yes, you can use a normal motor, but TT gear motors provide better torque and control
Bro program is not opening plz help me
@@nikitarpatil11 bro in phone ya laptop
sir I am not able to program
Remove RX pin before upload the code
can you share the codes?
Check out the description
Superb , keep it up
❤
can i use a 775 12vDC motor and 16v power with2500 mah??
Yes, you can, but L298N may not be suitable for controlling a 775 motor.Use another suitable motor driver and a higher-capacity battery.
how to buy Arduino products in india
I'm not familiar with the ways to buy Arduino products in India.
Bro same i do but my car is not runing i connect bluetooth module and same your circuit but don't work plz tell me
Check Connections
@@heshanpasindu bro same my also not working
@@Fanku_atikash-67860did You disconect TX and Tx before uploading the code, because I tried this project with this code and it really works
Were you guys able to solve problem? Cause I am thinking to start this for my project:)
@@Fanku_atikash-67860 Check motor driver connections
wheres the code?
In the description
@@heshanpasinduThx I found it wish me luck bro for our finals. Great Vid❤❤
Pdf not working please
@@nashwanostalgia3031 Is diagram
Creative video, thanks :)
❤
Magic ✨ design
❤
I well make this project but one problem i faced i am using same battery 2 but my l298 motor diver dont get power ( dont glow red light )
but arduino get power how and i think my moter driver is defective( kharab ) so i give power from arduino the red light start how i fix this problem i give power from coding cable ❤
Check battery voltage
@@heshanpasindu bro maximum voltage?
L298N typically requires a voltage between 7V and 12V to drive motors effectively
😍❤️
❤
❤😮
❤
🩶🤩
❤
Wow
❤
How much price bro please details
How much price bro please details